Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 31 for “"plastic pipe"”.

  1. Polymer Process Partitioning: Extruding Plastic Pipe

    When plastic pipe is solidified, it proceeds through a long cooling chamber. Inside this chamber, inside the hollow extrudate, the plastic is molten, and this inner surface solidifies last. Sag, the flow due to the self-weight of the molten plastic, then happens in this cooling chamber, and …

    queens Repository record for Polymer Process Partitioning: Extruding Plastic Pipe (opens in a new tab)

  2. A case study of plastic pipe recycling within Civil Engineering

    … thesis is to investigate how recycling of pipe scraps is currently being handled at NCC and also how the whole system for pipe scraps is currently set up. The aim of the study is to compare this system with the models of circular economy in order to investigate if they are compatible, and …

    chalmers Repository record for A case study of plastic pipe recycling within Civil Engineering (opens in a new tab)

  3. The Effects Of Tpo And Tpe On Polyethylene Blends In Plastic Pipe Applications

    Currently corrugated dual walled pipes struggle from decreased hydrodynamic efficiency due to plastic deformation of the inner wall (liner). This deformation is caused when the pipe is coiled for storage or transportation. To address these issues, this study investigated various blends composed of …

    umn Repository record for The Effects Of Tpo And Tpe On Polyethylene Blends In Plastic Pipe Applications (opens in a new tab)

  4. Simulation of pipe extrusion : cooling and annealing

    <p>When plastic pipe is extruded, it emerges from an annular die and passes through a sizing sleeve to set its outer diameter. The pipe is then solidified in a cooling tank by spraying the outer surface with cold water. The final pipe properties depend on cooling and annealing process.</p> <p>The …

    ut-knoxville Repository record for Simulation of pipe extrusion : cooling and annealing (opens in a new tab)

  5. A study of horizontal and down hill two-phase oil-water flow

    Concurrent oil and water flow in inclined pipes is a common occurrence in deviated wells and production gathering systems. To predict properties associated with non-emulsified oil and water flow such as pressure gradient, two-phase flow correlations developed for gas-liquid flow or average flow …

    texas Repository record for A study of horizontal and down hill two-phase oil-water flow (opens in a new tab)

  6. Surface radiological investigations at trench 5 : a waste disposal site

    … areas were strewn with metal, rubber, and plastic pipe sections. Alpha, beta, and gamma contamination was discovered on the metal pipes; some beta contamination was removable.</p> <p>Seven shallow wells containing uranium and fission products in a nitric acid solution are located near the …

    ut-knoxville Repository record for Surface radiological investigations at trench 5 : a waste disposal site (opens in a new tab)

  7. Modeling the Behavior of Smart Oil Well Cements and Offshore Pipe-Soil Interaction in Very Soft Soil

    … gas production infrastructures from borehole to pipelines. Rheology properties and hardening characteristics are some of the important parameters for cementing slurry during installation. Also over the last decade, health monitoring of the plugging material during service life became more …

    houston Repository record for Modeling the Behavior of Smart Oil Well Cements and Offshore Pipe-Soil Interaction in Very Soft Soil (opens in a new tab)

  8. Assessing the condition of buried pipe using ground penetrating radar

    … not been used to assess the condition of buried pipes. Pipe deterioration can be defined as pipes where, for example, cracking, differential deflection, missing bricks, collapses, holes, fractures and corrosion exists. Assessing the deterioration of underground pipes is important for service …

    birmingham Download PDF for Assessing the condition of buried pipe using ground penetrating radar (opens in a new tab)

  9. An evaluation of rural public water systems

    … not be ignored as has been done in some cases. Plastic pipe, utilized for its economic benefit, was found to be generally satisfactory. Criteria other than those recommended by FHA are suggested for domestic water consumption, instantaneous flow rates, and distribution storage. Finished water …

    vt Repository record for An evaluation of rural public water systems (opens in a new tab)

  10. Low-Cost Grain Bin Moisture Sensor Using Multiple Capacitive Elements

    … of wheat samples in a six inch by five foot plastic pipe. Grain with different moisture levels from 9.7% wet basis (w.b) to 16% w.b. was used. The sensor accuracy was found to measure grain moisture content to ±0.5% w.b. for the majority of cases, and ±1.5% w.b. for all tested cases. A number …

    regina Repository record for Low-Cost Grain Bin Moisture Sensor Using Multiple Capacitive Elements (opens in a new tab) Download PDF for Low-Cost Grain Bin Moisture Sensor Using Multiple Capacitive Elements (opens in a new tab)

  11. Impact of Voids on Buried Utility Pipes Subjected to Surface Traffic Loading

    The integrity and performance of buried pipe infrastructure is vital to our society for the provision of safe potable water and, transportation of sewage. For this purpose, a diverse range of buried utility pipes are deployed ranging from large diameter concrete sewer pipes to small diameter fresh …

    whiterose Download PDF for Impact of Voids on Buried Utility Pipes Subjected to Surface Traffic Loading (opens in a new tab)

  12. Autumnal and over-winter limnology of three small eutrophic lakes with particular reference to experimental circulation and trout mortality

    … of a submerged circles(circumference = 726 m) of plastic pipe and an air compressor was used to circulate Corbett Lake in the autumn of 1962 and 1963. The results of the experimental circulation of Corbett Lake compared to the limnological conditions in the "control" lakes, confirmed the original …

    ubc Repository record for Autumnal and over-winter limnology of three small eutrophic lakes with particular reference to experimental circulation and trout mortality (opens in a new tab) Download PDF for Autumnal and over-winter limnology of three small eutrophic lakes with particular reference to experimental circulation and trout mortality (opens in a new tab)

  13. The effects of psychological safety, team efficacy, and transactive memory system development on team learning behavior in virtual work teams

    … made up of members of a leading North American plastic pipe trade association were given an electronic survey. Responses from 124 individuals representing 47 individual member companies and 23 distinct teams were gathered. The constructs measured in the survey are conceptually meaningful at the …

    umn Repository record for The effects of psychological safety, team efficacy, and transactive memory system development on team learning behavior in virtual work teams (opens in a new tab)

  14. Development of an assisted-teleoperation system for a dual-manipulator nuclear decommissioning robot

    … tasks, such as remote handling and pipe cutting. The machine consists of dual, seven–function, hydraulically actuated HYDROLEK manipulators mounted (in prior research) on a mobile BROKK base unit. Whilst the original system was operated by remote control, the present thesis focusses …

    lancaster Download PDF for Development of an assisted-teleoperation system for a dual-manipulator nuclear decommissioning robot (opens in a new tab)

  15. Robot Mapping and Localisation in Water Pipes

    … industries on their water mains and distribution pipes is increasing. In urban water distribution systems, due to the fact that water pipes are ageing, pipe leakages and serious damage may occur. Compared with the cost of pipe replacement in the underground distribution system, regular pipe …

    whiterose Download PDF for Robot Mapping and Localisation in Water Pipes (opens in a new tab)

  16. Slip Lined Culvert Retrofit and Fish Passage

    … an existing culvert barrel and stabilized. Plastic pipe sleeves are very popular for slip lining primarily because the plastic material's lower Manning's roughness values allow for the culvert capacity to be maintained despite a reduction in culvert size. Unfortunately, the reduced friction …

    byu Repository record for Slip Lined Culvert Retrofit and Fish Passage (opens in a new tab) Download PDF for Slip Lined Culvert Retrofit and Fish Passage (opens in a new tab)

  17. Evaluation of Strength and Hydraulic Properties of Buried Pipe Systems Used for Stormwater Harvesting

    … In this study, high-density polyethylene (HDPE) pipes used as an underground storage was evaluated and a Microsoft EXCEL based model was developed, called PIPE-R Model. To study the structural integrity of the pipes, laboratory and field testing were conducted. For the water harvesting, UCF …

    ucf Repository record for Evaluation of Strength and Hydraulic Properties of Buried Pipe Systems Used for Stormwater Harvesting (opens in a new tab)

  18. Constructibility review and economic analysis for the installation of large-diameter HDPE drainage pipe

    … large diameter High Density Polyethylene (HDPE) pipe for gravity flow storm drainage. Pipes of diameter 18 in., 24 in., 30 in., 36 in., 42 in. and 48 in. have been considered in the above analysis. The constructibilty review and the economic analysis described here were performed as a part of a …

    ttu Repository record for Constructibility review and economic analysis for the installation of large-diameter HDPE drainage pipe (opens in a new tab)

Page 1 of 2