Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 49 for “"plastic substrate"”.

  1. Strain sensor array using printed single crystalline silicon on plastic substrate

    … strain gauge using single crystalline silicon on plastic substrate, and describes the Colpitts oscillator that has the potential of wireless data transmission between sensor and data acquisition unit. In general, a metal strain gauge has high flexibility with low sensitivity, whereas the …

    uiuc Repository record for Strain sensor array using printed single crystalline silicon on plastic substrate (opens in a new tab)

  2. Plastic substrate design for enhanced light outcoupling from Organic Light Emitting Diodes (OLEDs)

    … (i) so-called "external" waveguiding in the substrate, (ii) internal waveguiding in the high refractive index anode and organic layers, and (iii) excitation of surface plasmon polaritons at the metal cathode/organic interface. The ~30% external waveguided light can be extracted via a …

    iastate Repository record for Plastic substrate design for enhanced light outcoupling from Organic Light Emitting Diodes (OLEDs) (opens in a new tab)

  3. Design and fabrication of polythiophene-based organic photovoltaic devices on glass and plastic substrate

    … on P3HT:PCBM blends, fabricated on glass and plastic. This work compares several measured characteristics of these devices so as to bring insight on the effect of annealing and regioregularity of the polymer on the photovoltaic characteristic of the devices. More specifically, we present the …

    ubc Repository record for Design and fabrication of polythiophene-based organic photovoltaic devices on glass and plastic substrate (opens in a new tab) Download PDF for Design and fabrication of polythiophene-based organic photovoltaic devices on glass and plastic substrate (opens in a new tab)

  4. MECHANICAL EVALUATION OF NANOCOMPOSITE COATINGS

    … structure composing of AR coatings on a lens substrate. These coatings can be made by a spin-coating process with a nanocomposite of UV curable acrylic monomers and well dispersed metal oxide nanoparticles. The in-situ UV polymerization rate was reduced by oxygen inhibition and the absorption …

    uky-thes Repository record for MECHANICAL EVALUATION OF NANOCOMPOSITE COATINGS (opens in a new tab)

  5. Differential expressions of cell cycle regulatory proteins and ERK1/2 characterize the proliferative smooth muscle cell phenotype induced by allylamine

    … cells than control counterparts seeded on a plastic substrate, a difference lost when cells were seeded on collagen. p27 levels were comparable in both cell types irrespective of substrate. Basal levels of p21 and p27 were 1.4 fold higher in G0 synchronized allylamine cells compared with G0 …

    tamu Repository record for Differential expressions of cell cycle regulatory proteins and ERK1/2 characterize the proliferative smooth muscle cell phenotype induced by allylamine (opens in a new tab)

  6. Theoretical and experimental studies of bending/stretching of inorganic electronic materials printed on plastic substrates and their practical applications

    … However, the behavior of inorganic materials on plastic substrate by bending has been not studied well and the degree of bendability has simply defined by the bend radius at which the strain reaches some substantial fraction of a fracture strain (e.g., ~1 %) in a typical inorganic film. This …

    uiuc Repository record for Theoretical and experimental studies of bending/stretching of inorganic electronic materials printed on plastic substrates and their practical applications (opens in a new tab)

  7. Label-Free Biosensor Based Upon Replica-Molded Vertically Emitting Distributed Feedback Laser

    … laser sensor structures that are fabricated upon plastic substrate in an inexpensive replica molding process render this sensor of value for applications in life science research, diagnostic testing, and environmental monitoring.

    uiuc Repository record for Label-Free Biosensor Based Upon Replica-Molded Vertically Emitting Distributed Feedback Laser (opens in a new tab)

  8. Flexible and transparent microcavity plasma devices: fabricated by polymer-based replica molding technique

    … and transparent microplasma devices using plastic substrate has explored new avenues in plasma science and technology. A polymer-based replica molding process enables inexpensive and accurate production of microcavities of the devices. Best known as the sources of visible, ultraviolet (UV) …

    uiuc Repository record for Flexible and transparent microcavity plasma devices: fabricated by polymer-based replica molding technique (opens in a new tab)

  9. Radar Transparency and Paint Compatibility - A Study of Automobile Bumper and Bumper-Skin Complex Permittivities for 77GHz Microwaves

    … the free- space method was performed on 21 flat plastic substrates with various combinations of primers, basecoats and topcoats. 4 additional plates were repainted to simulate aftermarket paint. The substrates were PP-blends and some of the basecoats had effect pigments such as aluminum metal …

    chalmers Repository record for Radar Transparency and Paint Compatibility - A Study of Automobile Bumper and Bumper-Skin Complex Permittivities for 77GHz Microwaves (opens in a new tab)

  10. Carbon nanomaterials as counter electrodes for dye solar cells

    … roll-to-roll deposition techniques on flexible substrates, which is considered as one option for cost-effective large-scale solar cell production. The most expensive component of the DSC is the transparent conductive oxide glass substrate, and considerable cost reductions can be achieved by …

    aalto Repository record for Carbon nanomaterials as counter electrodes for dye solar cells (opens in a new tab)

  11. Fabrication and Optimization of Flexible Dye Sensitized Solar Cells

    … improvements have been reported on rigid glass substrates which limit applications to flat rigid surfaces. For flexible and portable applications, a polymer substrate is preferred. However plastic DSSCs have lagged behind in terms efficiency as the plastic substrate cannot withstand the high …

    nus Repository record for Fabrication and Optimization of Flexible Dye Sensitized Solar Cells (opens in a new tab) Download file for Fabrication and Optimization of Flexible Dye Sensitized Solar Cells (opens in a new tab)

  12. Meshed Patch Antennas Integrated on Solar Cell - A Feasibility Study and Optimization

    … The solar cell cover glass is used as the substrate for the patch antenna. The antenna topology is chosen to be a meshed patch so that it is transparent to light to ensure the proper operation of solar cells. We found that although there is a compromise between the antenna efficiency and …

    utahstate Repository record for Meshed Patch Antennas Integrated on Solar Cell - A Feasibility Study and Optimization (opens in a new tab)

  13. Toward roll-to-roll transfer of large-scale graphene for flexible electronics fabrication

    … transfer large-scale graphene sheet to flexible substrates with minimal quality degradation. In this thesis, a bilayer polymer support for graphene transfer is proposed. Liquid PDMS (polydimethylsiloxane) is first coated on graphene to conform to its surface morphology. A flexible plastic …

    texas Repository record for Toward roll-to-roll transfer of large-scale graphene for flexible electronics fabrication (opens in a new tab)

  14. Experimental studies on high-energy radiation sources from laser wakefield accelerators

    … laser pulse ionizes the surface of a glass or plastic substrate to form a plasma mirror. The plasma mirror retro-reflects a majority of the remaining laser energy back into the accelerated electrons to act as an optical undulator, which stimulates the production of γ-rays. By adjusting the …

    texas Repository record for Experimental studies on high-energy radiation sources from laser wakefield accelerators (opens in a new tab)

  15. Packaging of Active RF Beamforming IC Utilizing Additive Manufacturing

    … RF device with measurable gain within a printed plastic substrate. Critical to developing a repeatable method for this packaging solution, initial studies were made to characterize the materials used and to duplicate the structures and printing methods needed to fabricate the final device. The …

    usf Repository record for Packaging of Active RF Beamforming IC Utilizing Additive Manufacturing (opens in a new tab)

  16. Nanoscale graphene for RF circuits and systems

    … the first standalone carbon radio on flexible plastics. A front end receiver, comprised of an integrated carbon antenna, transmission lines, and a graphene transistor for demodulation, are all fabricated onto one plastic substrate, to be interfaced with speakers for a full radio demo. This …

    texas Repository record for Nanoscale graphene for RF circuits and systems (opens in a new tab)

  17. Measurement of fine particle deposition from flowing suspensions

    … structure. The plate glass was coated with a plastic to achieve suitable surface conditions. The measurements of deposition and release of negatively charged silica spheres onto and from a positively charged plastic substrate was greatly facilitated by employing a direct microscopic technique …

    ubc Repository record for Measurement of fine particle deposition from flowing suspensions (opens in a new tab) Download PDF for Measurement of fine particle deposition from flowing suspensions (opens in a new tab)

  18. Microbead-Based Biosensing in Microfluidic Devices

    … used to stamp an array of microwells in a thin plastic substrate where appropriately functionalized agarose microbeads were selectively placed within a conduit. Functionalized quantum dot nanoparticles were pumped through the conduit and used as a fluorescent label to monitor binding to the …

    penn Repository record for Microbead-Based Biosensing in Microfluidic Devices (opens in a new tab)

  19. Label-free biosensor based upon a vertically emitting distributed feedback laser

    … over large surface areas upon a flexible plastic substrate, with an approach that is compatible with roll-based manufacturing. Secondly, laser pump threshold from a distributed feedback (DFB) structure, based upon a second order grating in a dye-doped polymer, has been efficiently reduced …

    uiuc Repository record for Label-free biosensor based upon a vertically emitting distributed feedback laser (opens in a new tab)

  20. Mechanical oxidation and microparticle production: a quantitative study of mechanical plastic weathering using novel reactor design

    Mechanical degradation of plastic waste is a major source of microplastics and potentially a large contributor to the oxidation of plastic waste in soil and water environments. Mechanical oxidation of plastic occurs when mechanical force induces homolysis of covalent bonds on the carbon backbone …

    umn Repository record for Mechanical oxidation and microparticle production: a quantitative study of mechanical plastic weathering using novel reactor design (opens in a new tab)

Page 1 of 3