Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 208 for “"plasticization"”.

  1. The attempted plasticization of cellulose from cellulose xanthate

    This investigation was started at the suggestion of Dr. P. C. Scherer who suggested that a film prepared from a cellulose xanthate, in which the fiber form had been destroyed by some action other than by dilute alkali, should have interesting properties. The possibilities of such a material might …

    vt Repository record for The attempted plasticization of cellulose from cellulose xanthate (opens in a new tab)

  2. Vacuum Steam Technology for Rapid Plasticization and Bending of Maple

    … adding moisture and heat to wood results in plasticization. Steaming at atmospheric pressure is the common technique for wood bending where diffusion prevails as the predominant mechanism governing moisture movement. Applications using conventional atmospheric steaming are time consuming and …

    vt Repository record for Vacuum Steam Technology for Rapid Plasticization and Bending of Maple (opens in a new tab)

  3. PERFLUOROCYCLOBUTYL POLYMER THIN-FILM COMPOSITE MEMBRANE FABRICATION, PLASTICIZATION AND PHYSICAL AGING

    … with the problems of physical aging and plasticization. Many researchers have found that these two phenomena are more significant in thin polymer films. Unfortunately, flux of gas through polymeric membranes is inversely related to polymer thickness; thus, thin polymer films (<1000 >nm) …

    clemson Repository record for PERFLUOROCYCLOBUTYL POLYMER THIN-FILM COMPOSITE MEMBRANE FABRICATION, PLASTICIZATION AND PHYSICAL AGING (opens in a new tab)

  4. Improving polyimide membrane resistance to carbon dioxide plasticization in natural gas separations

    … gas and hydrocarbon separations is limited by plasticization-induced selectivity losses in feeds with significant partial pressures of CO2 and C3+ hydrocarbons. This project focuses on understanding CO2-induced plasticization of polyimide membranes and how it can be controlled by thermal …

    texas Repository record for Improving polyimide membrane resistance to carbon dioxide plasticization in natural gas separations (opens in a new tab)

  5. Implications of plasticization on the properties of hot-melt extruded oral dosage forms

    The influence of plasticization and other formulation factors on the properties of hot-melt extruded dosage forms for the controlled release of water-soluble active compounds was investigated. Citric acid monohydrate was demonstrated to function as a solid-state plasticizer in hot-melt extruded …

    texas Repository record for Implications of plasticization on the properties of hot-melt extruded oral dosage forms (opens in a new tab)

  6. Low hydrocarbon solubility polymers: plasticization-resistant membranes for carbon dioxide removal from natural gas

    … in performance is primarily a result of polymer plasticization by natural gas components like higher hydrocarbons, which have high solubilities in these polymers. Polymers that have low solubilities for higher hydrocarbons may be less susceptible to plasticization by these penetrants and …

    texas Repository record for Low hydrocarbon solubility polymers: plasticization-resistant membranes for carbon dioxide removal from natural gas (opens in a new tab)

  7. The plasticization of 4-methyl-pentene-1 (TPX-RT-D30) polymer with petroleum jelly

    … up to 30% and opaque at higher ratios.</p><p>The plasticization of TPX-RT-D30 by the petroleum jelly apparently allows the high molecular weight polymer to crystallize and must influence the polymer crystalline size and perfection. Lamellar thickness may also be changed. The petroleum jelly lowers …

    njit Repository record for The plasticization of 4-methyl-pentene-1 (TPX-RT-D30) polymer with petroleum jelly (opens in a new tab)

  8. Influence of processing procedure, plasticization, and high temperature physical aging on poly(benzimidazole) gas separation membranes

    … p/m-PBI copolymers. Physical aging and plasticization studies provide insights into the viability of PBIs as pre-combustion carbon capture membranes.

    texas Repository record for Influence of processing procedure, plasticization, and high temperature physical aging on poly(benzimidazole) gas separation membranes (opens in a new tab)

  9. Carbon dioxide plasticization and conditioning of thin glassy polymer films monitored by gas permeability and optical methods

    … investigated physical aging and carbon dioxide plasticization behavior of glassy polymer films. Recent studies have shown that thin glassy polymer films undergo physical aging more rapidly than thick films. This suggests that thickness may also play a role in the plasticization and conditioning …

    texas Repository record for Carbon dioxide plasticization and conditioning of thin glassy polymer films monitored by gas permeability and optical methods (opens in a new tab)

  10. Improving the performance of solid polymer electrolytes for lithium batteries via plasticization with aqueous salt or ionic liquid

    The goal of this dissertation is to investigate and enable polyethylene oxide (PEO)-based solid polymer electrolytes (SPEs) for lithium batteries. Specifically, two different strategies to plasticize the PEO matrix for improving ion transport are explored. PEO has a propensity to crystallize below …

    maryland Repository record for Improving the performance of solid polymer electrolytes for lithium batteries via plasticization with aqueous salt or ionic liquid (opens in a new tab)

  11. Optimizing the structure and plasticization resistance of asymmetric polyimide hollow fiber membranes for CO2 removal from natural gas

    … to gain a comprehensive understanding of the plasticization phenomenon and to link the bridge between membrane formation mechanisms with membrane morphology and plasticization phenomenon. Gas sorption tests were performed on the in-house fabricated Matrimid hollow fibers with various ranges of …

    unsw Repository record for Optimizing the structure and plasticization resistance of asymmetric polyimide hollow fiber membranes for CO2 removal from natural gas (opens in a new tab)

  12. Polyimide-Organosilicate Hybrid Materials: Part I: Effects of Annealing on Gas Transport Properties; Part II: Effects of CO2 Plasticization

    … evaluate how the hybrid materials reacted to CO₂ plasticization. Steady-state gas permeation experiments were performed at 35°C using pure CO₂ and CH₄ gases at feed pressures ranging from 4 to 30 atm. All four materials exhibited dual mode sorption up to feed pressures of 17 atm, at which point …

    vt Repository record for Polyimide-Organosilicate Hybrid Materials: Part I: Effects of Annealing on Gas Transport Properties; Part II: Effects of CO2 Plasticization (opens in a new tab)

  13. In situ Plasticization of Starch and Coblending with Bio-based Polyesters: An Investigation into The Process Parameters for Continuous Thermoplastic Starch Co-Polyester Manufacturing

    … parameters required for the gelatinization and plasticization of Dent cornstarch (the control) were found to have a correlation between moisture, temperature, mechanical energy and the presence of alternative plasticizers, depending on processing temperature. These parameters were used to …

    waterloo Repository record for In situ Plasticization of Starch and Coblending with Bio-based Polyesters: An Investigation into The Process Parameters for Continuous Thermoplastic Starch Co-Polyester Manufacturing (opens in a new tab)

  14. Preparation and Properties of Flexible Resin Sheets From Zein

    Overall, plasticization of zein with oleic and linoleic acids resulted in thermoplastic and moldable resins potentially useful for manufacturing flexible packaging materials. Methods of plasticizer incorporation influenced effectiveness of plasticization. Stabilizing and enhancing of …

    uiuc Repository record for Preparation and Properties of Flexible Resin Sheets From Zein (opens in a new tab)

  15. Sheet extrusion and plasticisation of Novatein thermoplastic protein

    … protein structure, rheological properties and plasticization of Novatein. Novatein is a biomass-based thermoplastic in which the main constituent is blood meal, a highly aggregated protein-rich biopolymer, which is a by-product from the meat industry. It can be processed with industrially …

    waikato-masters Repository record for Sheet extrusion and plasticisation of Novatein thermoplastic protein (opens in a new tab) Download file for Sheet extrusion and plasticisation of Novatein thermoplastic protein (opens in a new tab)

  16. The Performance of Hollow Fiber Gas Separation Membranes in the Presence of an Aggressive Feed Stream

    … a significant decrease in the carbon dioxide plasticization pressure and the carbon dioxide permeance prior to plasticization as a result of accelerated physical aging at ambient temperature. Interestingly, sub-Tg thermal annealing at 220 oC reverses the effects of physical aging by increasing …

    gatech Repository record for The Performance of Hollow Fiber Gas Separation Membranes in the Presence of an Aggressive Feed Stream (opens in a new tab)

  17. Fundamental gas transport in thermally cross-linked diaminophenylindane (DAPI) containing polyimides

    … has on fundamental gas transport and plasticization resistance of these materials. To accomplish this goal, a polyimide containing diaminophenylindane (DAPI), hexafluoroisopropylindene (6FDA), and diaminobenzoic acid (DABA), referred to as 6FDA-DAPI/DABA, was synthesized and …

    texas Repository record for Fundamental gas transport in thermally cross-linked diaminophenylindane (DAPI) containing polyimides (opens in a new tab)

  18. The Effects of Molecular Structure and Design on the Plasticizer Performance Through Coarse-Grained Molecular Simulation

    … to sensitive medical equipment, the mechanism of plasticization is not fully understood. There are three theories used to explain plasticization: lubricity theory, gel theory, and free volume theory. The latter is a fundamental concept of polymer science that is used to calculate many polymer …

    mcmaster Repository record for The Effects of Molecular Structure and Design on the Plasticizer Performance Through Coarse-Grained Molecular Simulation (opens in a new tab)

Page 1 of 11