Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 335 for “"plasticizer"”.
-
Emissions of Phthalate Plasticizer from Polymeric Building Materials
… major indoor pollutants. They are mainly used as plasticizers to enhance the flexibility of polyvinylchloride (PVC) products, as well as in humectants, emollients, and antifoaming agents. Phthalates are found in a wide range of consumer products including floor and wall coverings, car interior …
-
Microplastic, anthropogenic fibre, and plasticizer retention by integrated constructed wetlands
Microplastic, anthropogenic fibre and plasticizer pollution from wastewater treatment plant (WWTP) effluent is an emerging environmental issue, as conventional sewage treatments typically cannot remove these contaminants. Integrated constructed wetlands (ICWs) are gaining increased interest as a …
-
Plasticizer Identification and Characterization Across Multiple Poly(Vinyl) Chloride (PVC) Blends
… of PVC consist of multiple additives, such as plasticizers, which provide the material with flexibility but complicate recycling. Industrial plasticizers are typically phthalate-based, which are toxic and migrate from the material over time. In our research, we developed a methodology for the …
-
Investigation of Polymer-Plasticizer Blends for BTEX Detection Using Quartz Crystal Microbalance
… quantify BTEX gases in the air using a polymer-plasticizer blend as the sensing film.Plasticization helps to modify the chemical and physical properties of the glassy polymer by decreasing the glass transition temperature, altering the pore dimensions, and increasing the free volume of the …
-
Effect of structure and plasticizer on the glass transition of adsorbed polymer
… about 1.8. The dynamics of the phenyl-deuterated plasticizer di(propylene glycol) dibenzoate in bulk and adsorbed PVAc on silica were probed using solid-state ²H NMR. The dynamics of this plasticizer in the plasticized-bulk polymer system were found to be heterogeneous. For adsorbed PVAc on …
-
Influence of pozzolans and plasticizer on the performance of paste backfill in underground mines
Gideon Yowa investigated the possibility of using pozzolans to partially replace cement in mine filling to reduce the filling cost and make backfilling more environmentally friendly. He found that when pozzolans replace cement partially, the strength attained was comparable to the strength that …
-
Effect of photoageing and plasticizer content on the mechanical and adhesive properties of polyvinylbutyral
… of polyvinylbutyral and determine the effect of plasticizer content and photoageing on these properties. This data would be used to understand how the performance of laminated safety glass is related to the choice of adhesive interlayer. Samples of PVB plasticized with 0 to 40% butyl benzyl …
-
Characterization of Plasticizer-Polymer Coatings for the Detection of Benzene in Water Using Sh-Saw Devices
… new coating materials based on polymer/plasticizer mixtures coated onto a shear horizontal surface acoustic wave (SH-SAW) sensor to detect benzene in water. There are many polymers which are unavailable for use as a sensing polymer due to their glassy nature. The use of plasticizers …
-
The Effects of Molecular Structure and Design on the Plasticizer Performance Through Coarse-Grained Molecular Simulation
Plasticizers are a commonly used additive used in the polymer industry to make the plastic more pliable by reducing the glass transition temperature, Tg and Young's modulus, Y. As the plasticizer aids in polymer process-ability and making it suitable for applications from industrial cables to …
-
Solid-contact potassium ion-selective electrodes with plasticizer-free silicone-based membranes for extended potassiumiIon monitoring in physiological samples
In recent years, wearable potentiometric sensors have been used to monitor the real-time concentration of ions such as K+, pH, Na+ in sweat or interstitial fluid. However, a majority of ISEs reported to-date comprise a plasticized poly(vinyl chloride) (PVC) membrane, a mobile ionophore, and mobile …
-
Investigation of the Use of a Plasticizer-Polymer Sensor Coating with Improved Long-Term Stability in the Liquid Phase
… does not allow for rapid benzene absorption. A plasticizer can be added to the selected polymer to lower the glass transition temperature. This makes the polymer more rubbery allowing for rapid analyte absorption. However, most plasticizers will tend to leach out of the polymer over time. The …
-
Automating a Pump Cleaning System
… phthalate (DPHP), commonly known as plasticizer. The plasticizer is dyed, then heated, then poured and spread across various materials, then cooled at a specified rate. Before the plasticizer is dyed, it needs to be cleaned. At the cleaning station, the new plasticizer is mixed with …
-
Preparation and Properties of Flexible Resin Sheets From Zein
… flexible packaging materials. Methods of plasticizer incorporation influenced effectiveness of plasticization. Stabilizing and enhancing of plasticizer-zein complexes are crucial to accomplish plasticization.
-
Sorption of Benzene, Tolueneand Ethylbenzeneby Plasticized PEMA and PEMA/PMMA Sensing Films Using aQuartz Crystal Microbalance (QCM) at 298.15K
… this work, thin films (~ 0.5 microns) of polymer/plasticizer blends are spin-coated on a 5MHz QCM for the detection of VOC’s. A polymer/plasticizer combination of poly (ethyl methacrylate) (PEMA) and a copolymer of poly (ethyl methacrylate) and poly (methyl methacrylate) (PEMA/PMMA) with di …
-
Plasticized Polymer Coatings for SH-SAW Sensors for High Sensitivity and Long-Term Monitoring of BTEX Analytes in Liquid Phase
… of a suitable polymer, the addition of a plasticizer is a convenient means to lower the glass transition temperature and thus increase sensitivity. The best coatings for acoustic-wave chemical sensors will be those which are rubbery in the low-frequency range, resulting in good analyte …
-
Continuous blending approach in the manufacture of epoxidized soybean-plasticized poly(lactic acid) sheets and films for packaging applications
… a continuous and accurate incorporation of the plasticizer into the molten matrix.The effect of ESO addition levels on impact and tensile properties of plasticized PLA sheets was examined. The flexibility of plasticized specimens and the phase morphology between the plasticizer and the matrix …
-
Optimization of polymer/ruthenium complex optical oxygen sensor
… into a polyacrylate polymer in the first step. A plasticizer (dioctylphthalate) was then added to the polymer/ruthenium mixture to improve the oxygen permeability of the sensor material. Optimum composition films were identified by the analysis of fluorescence lifetime decay curves using the …
-
Molecular simulation for physicochemical properties of liquid mixtures with industrial applications
… were studied. The first is amorphous polymer-plasticizer mixtures, which, with varying composition, correspond to plastic products of different grades for application in different areas. The most important class of plasticizers are phthalate diesters, in which di (2-ethylhexyl) phthalate …
Page 1 of 17