Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 72 for “"plate structure"”.

  1. Experimental and finite element analysis of a folded plate structure containing rectangular openings

    … behavior of single-span, simply-supported folded plate structures containing rectangular openings is summarized. A seven-plate aluminum model was tested under a uniform load of 40.26 psf. on the horizontal surfaces. Six different cases are analyzed by changing the number, size, and location of the …

    vt Repository record for Experimental and finite element analysis of a folded plate structure containing rectangular openings (opens in a new tab)

  2. Analytical and experimental studies of beam waveguide absorbers for structural damping

    … evaluates the increase in vibration damping of a plate structure across a broad frequency range using light weight beam waveguide absorbers. Viscoelastic and constrained layer beam waveguide absorbers were studied both theoretically and experimentally. Impedances of the waveguide absorbers at the …

    nps Repository record for Analytical and experimental studies of beam waveguide absorbers for structural damping (opens in a new tab)

  3. Stiffness matrix solution for folded plates

    … analysis for a simply supported prismatic folded plate structure is presented. A stiffness matrix method is used with the individual plates taken as structural elements. When loads are applied to the structure the solution yields joint deflections and internal plate forces. The exact elasticity …

    ubc Repository record for Stiffness matrix solution for folded plates (opens in a new tab) Download PDF for Stiffness matrix solution for folded plates (opens in a new tab)

  4. Demonstration of Topological Boundary States in Mechanical Metamaterials

    … by topological invariant predicted from band structures. Recently, experimental demonstrations of the topological insulators have successfully shown that the waves are highly immune to the backscattering. It grows researchers' attentions because it overcomes the disadvantage (energy …

    washington Repository record for Demonstration of Topological Boundary States in Mechanical Metamaterials (opens in a new tab)

  5. Damage detection in structures using frequency response function (FRF) data and finite element modelling

    … stiffness matrix of the original undamaged structure and the frequency response curve of the currently damaged structure. In this thesis, the former is obtained from a finite element model of the virgin structure and the latter are obtained from an impact hammer test. The Damage Detection …

    vu-aus Download PDF for Damage detection in structures using frequency response function (FRF) data and finite element modelling (opens in a new tab)

  6. Analysis of the Shock Response Spectrum and Resonant Plate Testing Methods

    … and investigated by testing a circular plate structure with integral damping. Effects on the SRS from physical alterations to the nonlinear structure were monitored from low and high shock impulses. A method was developed and validated to estimate high amplitude shock inputs from low …

    mtu Repository record for Analysis of the Shock Response Spectrum and Resonant Plate Testing Methods (opens in a new tab)

  7. A Study of Neural and Conventional Control Paradigms in Active Digital Control

    … of a nonlinear (geometrically) cantilevered plate structure which is an example of flexible structural control.

    uiuc Repository record for A Study of Neural and Conventional Control Paradigms in Active Digital Control (opens in a new tab)

  8. Effect of Aerogel on the Thermal Performance of Corrugated Composite Sandwich Structures

    … analysis on a corrugated composite sandwich structure integrated with aerogel insulation by studying its effective thermal conductivity. The aerogel material used was Pyrogel XT-E, a silica aerogel-based fiberglass insulation manufactured by Aspen Aerogels. Theoretical models of the …

    calpoly Repository record for Effect of Aerogel on the Thermal Performance of Corrugated Composite Sandwich Structures (opens in a new tab)

  9. Dynamic behavior of eccentrically stiffened plates

    … behavior of eccentrically stiffened rectangular plates is studied by the finite element method. The addition of stiffeners to a plate structure is a common method of increasing the rigidity of the structure with a minimum of weight increase. However, this stiffened plate configuration does not …

    must-thes Repository record for Dynamic behavior of eccentrically stiffened plates (opens in a new tab)

  10. Effects of Vertical Ground Motion on Seismic Performance of Reinforced Concrete Flat-Plate Buildings

    Reinforced concrete flat plate is a type of structural system widely used for office and residential buildings in many areas including those with high seismic risk. In the regions of high seismicity, moment frames or shear walls are employed to resist lateral loading while the flat-plate system is …

    unlv Repository record for Effects of Vertical Ground Motion on Seismic Performance of Reinforced Concrete Flat-Plate Buildings (opens in a new tab) Download PDF for Effects of Vertical Ground Motion on Seismic Performance of Reinforced Concrete Flat-Plate Buildings (opens in a new tab)

  11. Electromagnetic Modeling of Packaging Layout in Power Electronic Modules

    … (ii) The Metal Post Interconnected Parallel Plate Structure, and the (iii) Multi Layer Structure. The model developed is validated through experimentation. These models are then used in simulation in order to compare the electrical performance of the packaging technologies. Finally some …

    vt Repository record for Electromagnetic Modeling of Packaging Layout in Power Electronic Modules (opens in a new tab)

  12. Modification of an ultra-high-vacuum scanning tunneling microscope for silicon nanostructure fabrication

    … system are described: an update to the cooling plate structure for more effective cooling of the dipstick and sample holder, and the installation of a capillary doser for concentrating the precursor gas to the tip-ample junction during silicon nanostructure growth. The updated cooling plate is …

    uiuc Repository record for Modification of an ultra-high-vacuum scanning tunneling microscope for silicon nanostructure fabrication (opens in a new tab)

  13. Vibrational characteristics of structures with uncertainty

    … the prediction of the vibro-acoustic response of structures with uncertain properties in the mid frequency region. The motivation for this research is the growing need of engineers to understand the responses of a group of similar structures ranging from vehicles, aircraft and aerospace …

    unsw Repository record for Vibrational characteristics of structures with uncertainty (opens in a new tab)

  14. Computation of structural intensity in plates

    … per unit area is calculated for several types of plate structures using the finite element method. The structural intensity technique is acknowledged as a key method for vibration control and structural borne sound reduction and it is calculated from stress and velocity. The structural intensity …

    nus Repository record for Computation of structural intensity in plates (opens in a new tab) Download file for Computation of structural intensity in plates (opens in a new tab)

  15. Analysis and Testing of Steel Folded Plate Roof Unit

    … the investigation of an actual steel folded plate roof and the resulting analysis. At the present stage of development, it appears that the folded plate could be used to form the roof system of many buildings at a savings of about 30% in weight of the steel when compared with standard bar …

    sdstate Repository record for Analysis and Testing of Steel Folded Plate Roof Unit (opens in a new tab)

  16. Structural Performance of Reinforced Concrete Flat Plat Buildings Subjected to Fire

    Reinforced concrete structures are typically considered to have inherent resistance to fire. However, several concrete structures around the world have experienced partial or total collapse under fire. Reinforced concrete flat-plate is a type of structural system widely used for office and …

    unlv Repository record for Structural Performance of Reinforced Concrete Flat Plat Buildings Subjected to Fire (opens in a new tab) Download PDF for Structural Performance of Reinforced Concrete Flat Plat Buildings Subjected to Fire (opens in a new tab)

  17. Effective stiffness and punching failure of flat-plate structures

    … for lateral displacement analysis of flat-plate structures are one-value stiffness models which do not reflect the realistic response of structures. Based on the experimental data, the procedure for predicting the drift response of flat-plate structures is reviewed and an approach is …

    rice Repository record for Effective stiffness and punching failure of flat-plate structures (opens in a new tab)

  18. Vibration response of constrained viscoelastically damped plates: analyses and experiments.

    … of several constrained viscoelastically damped plates were performed with modifications to account for the frequency dependent properties of viscoelastic materials (loss factors and shear modulus) using MSC/NASTRAN. A modal strain energy approximation method was also applied to each plate. …

    nps Repository record for Vibration response of constrained viscoelastically damped plates: analyses and experiments. (opens in a new tab)

  19. The relationship between structure and seismogenic behaviour in subduction zones

    … studies of the interrelationships between the structure and seismogenic behavior of subduction zones.</p> <p>New marine geophysical data collected from the collision zone between the Louisville Ridge seamount chain with the Tonga-Kermadec trench constrain overthrusting and subducting plate …

    oxford Restricted access

Page 1 of 4