Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 300 for “"plies"”.
-
Wicking in Multi-Ply Paper Structures with Dissimilar Plies
… of multi-ply paper samples with dissimilar plies were investigated. These materials exhibit wicking performance in excess of either of their individual plies. Samples were produced from a ply of softwood pulp and a ply of hardwood pulp of equal caliper and basis weight. The softwood sample …
-
Matrix cracking behaviour of off-axis plies in glass/epoxy composit laminates
… behaviour of composite laminates which contain plies oriented at an angle to the loading axis. Incremental tensile tests were conducted on a set of glass-epoxy laminates having the [0/θ][formula omitted] geometry where θ takes the values of 45°, 60°, 75° and 90°. At each load increment, the …
-
Germinal Ideas and Processes within plies (2002): A Chamber Work for Eleven Players
… of jazz music informed the construction of plies, including the instrumentation of the ensemble and the means by which the performers interact throughout the piece. Internal cueing and performer decisions are meant to eliminate the need of a conductor in favor of increased interpretive …
-
Impact Resistance of Laminated Hybrid Composite Panels Composed of Compliant and Rigid Plies
… and unimpregnated dry woven fabric flexible plies assembled in different ways. The multi-layered composite panels are subjected to the impact by a hemispherical-nose projectile and have been either clamped along their edges or rested on an elasto-plastic foundation. A numerical simulation …
-
Response and failure analysis of a graphite-epoxy laminate containing terminating internal plies
… laminate thickness due to terminating internal plies acts as a stress riser for both intralamina and interlaminar stresses. This laminate configuration is referred to as a ply drop. The linear elastic, three-dimensional stress distributions in the vicinity of a ply drop are determined for a …
-
Damage and failure mechanisms under fatigue in long fibre composites with ultra-thin plies
El estudio del comportamiento a fatiga de los materiales compuestos es de gran interés en el ámbito científico debido al carácter no estático de las cargas que sufre una estructura en servicio. En los últimos años, la aparición de láminas ultradelgadas, de hasta 15 20 μm de espesor, ha tomado …
-
A characterization of the fracture behavior of thick, notched, laminated graphite/epoxy composites
… with thicknesses of 8, 32, 64, 96 and 120 plies and the [0/±45]<sub>ns</sub> laminate with thicknesses of 6, 30, 60, 90 and 120 plies. The research concentrated on the measurement of fracture toughness utilizing the center-cracked tension, compact tension and three point bend specimen …
-
Scaling Effects on Damage Development, Strength, and Stress-Rupture Life on Laminated Composites in Tension
… First-ply failure of the midplane 90 deg. plies depended on the stiffness of constraint plies, and size. All 24 cases were predicted using Zhang's shear-lag model and data generated from cross-ply tests. Laminate strength was controlled by the initiation of a triangular-shaped local …
-
Finite element analysis of composite tubes with integral ends subjected to bending loads
… to predict stresses within the individual plies of the tubes. The tubes under investigation were graphite/epoxy laminated composites with a stacking sequence of [0/-45/+45/90/90/+45/ -45/0] X 2 (Sixteen plies per tube). End pieces of isotropic titanium were integrally constructed with …
-
Local and Global Sensitivity Analysis of Thin Ply Laminated Carbon Composites
… strength of laminates constructed from very thin plies. Interlaminar shear and normal stress components have been shown to be concentrated on the edges, the so-called edge effect, of unidirectional laminates at the interface between plies of different fiber orientation. Research has shown that …
-
Lateral Torsional Buckling of Built-Up Beams
… timber beams are composed of multiple thin plies of equal depth, mechanically connected along their vertical interfaces using discrete fasteners to provide partial composite action. These beams are increasingly used in modern timber structures because thin plies are more economical and more …
-
Flutter analysis of flat rectangular anisotropic panels in a high Mach number supersonic flow
… the number of layers in an angle-ply panel, with plies of the same orientation angle but alternating signs. Solutions are obtained using a twenty term Rayleigh-Ritz procedure. Three different fiber-matrix combinations for the individual orthotropic plies are used, These are: boron-epoxy, …
-
Initiation and Evolution of Matrix Cracking in Non-Symmetric Laminates under in-Plane and Flexural Loading
… properties of the laminate containing individual plies affected by matrix cracking, ii) an energy based damage evolution criterion inspired by Fracture Mechanics, iii) an homogenization technique inspired by Continuum Damage Mechanics, iv) an iterative procedure in order to detect the conditions …
-
Effect of ply drop-offs on the strength of graphite-epoxy laminates
… of a graphite-epoxy laminate due to dropping plies is investigated experimentally and analytically. Laminates were tested under uniaxial tension and compression. All the laminates were flat on one side with the plies dropped from the middle of a [( ± 45/0/90)<sub>s</sub> (N<sub>d</sub>) ( ± …
-
Delamination initiation in postbuckled dropped-ply laminates
… the interfaces above and/or below the dropped plies is a common mode of failure initiation. The compression strength of specimens exhibiting a linear response is greater than the compression strength of specimens with the same layup exhibiting geometrically nonlinear response. Experimental and …
-
Effects of Initial Geometric Imperfections on the Behavior of Graphite-Epoxy Cylinders Loaded in Compression
… specimens. Four of the specimens were 16 plies thick; one of these had quasi-isotropic wall properties, another consisted entirely of angle plies, while the remaining specimens of this wall thickness were of two different orthotropic wall constructions. A fifth specimen was 8 plies in wall …
-
Fatigue crack initiation in cross-ply carbon fiber laminates
… in static and fatigue loading in the 90 degree plies of a "quasi-cross ply layup" [0/905]S was investigated. For layups which contain them, cracks in composite laminates initiate and propagate from 90 degree plies (including the ubiquitous "quasi-isotropic layup" 0/±45/90). Thus, this work …
-
Parametric Design & an Approach to Weight Optimization of a Metallic and Carbon Fiber Wing
… have some arbitrary number of composite super plies. Super plies are a concept consisting of a set of plies all arranged in the same direction. The thickness and orientation angles of the super plies are optimized. Then, each ply undergoes topometry optimization to obtain the areas of each …
Page 1 of 15