Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 49 for “"point control"”.

  1. Cerebral spasticity modeled as disorded equilibrium point control

    … the physiological mechanisms underlying the control of posture and movement in healthy individuals and possible impairments of these mechanisms leading to motor disorders. This research's goal was to determine the role of stretch reflex threshold in the regulation of impaired motor control …

    njit Repository record for Cerebral spasticity modeled as disorded equilibrium point control (opens in a new tab)

  2. Equilibrium point control of a programmable mechanical compliant manipulator

    … and experimental application of the Equilibrium Point Hypothesis as a controller model for a programmable mechanical compliant manipulator. A planar manipulator was designed and constructed with two joints, each powered by a pair of antagonistic McKibben actuators (air muscles). Programmable …

    ubc Repository record for Equilibrium point control of a programmable mechanical compliant manipulator (opens in a new tab) Download PDF for Equilibrium point control of a programmable mechanical compliant manipulator (opens in a new tab)

  3. The Construction of a Skill Test for Point Control in Fencing

    … of the study was to construct and standardize a point-control test to be used to determine beginning fencing ability in a bouting situation. The specific problem was to determine the reliability and validity of the point-control test.

    unt Repository record for The Construction of a Skill Test for Point Control in Fencing (opens in a new tab)

  4. Nonlinear MPC tracking control and set point control for wastewater treatment processes

    This thesis concerns the design of feedback controls of a biological wastewater treatment plant (BWT), specifically the benchmark simulation model number 1, and methods for determining optimal set points. In BWT, biological organisms remove unwanted substances including nitrogen, ammonia, and …

    calgary Repository record for Nonlinear MPC tracking control and set point control for wastewater treatment processes (opens in a new tab)

  5. Sequential set-point control of thermostatic loads using extended Markov chain abstraction to improve future renewable energy integration

    … to even small contingencies. Demand-side control is becoming an ingredient part of our future power system operation. Effective utilization of demand-side resources can make the system more elastic to integrate the future renewable plans. To help in resolving these challenges, this work …

    iastate Repository record for Sequential set-point control of thermostatic loads using extended Markov chain abstraction to improve future renewable energy integration (opens in a new tab)

  6. Comparison of optimal and geometric control methods for regulation of distributed parameter systems

    … thesis is concerned with several aspects of set-point control for distributed parameter systems. We first present the geometric design methodology for set-point control. We then demonstrate this methodology for a multi-input multi-output set-point control problem for a two dimensional nonlinear …

    ttu Repository record for Comparison of optimal and geometric control methods for regulation of distributed parameter systems (opens in a new tab)

  7. Isolated multiple-input single ended primary inductor converter (SEPIC) and applications

    … application. This thesis proposes the following control methods such as current feed-forward control, voltage feedback control and maximum power point control to analyze the IMISEPIC. Zero-ripple technique is also applied to IMISEPIC in order to increase the converter’s life-time. Design strategy …

    texas Repository record for Isolated multiple-input single ended primary inductor converter (SEPIC) and applications (opens in a new tab)

  8. Evaluation of control schemes of a binary distillation column.

    … reported by Gerster and co-workers (26), various control schemes were investigated by means of analog computer simulations for a 10% step disturbance in feed composition. Employing reflux manipulation to maintain constant overhead product composition, the optimal location of the sensing element …

    ottawa-retro Repository record for Evaluation of control schemes of a binary distillation column. (opens in a new tab)

  9. A novel dynamic bandwidth allocation algorithm with QoS support for EPON access networks

    … users. The PSDBA algorithm is based on the multi-point control protocol (MPCP) and allocates bandwidth on a per-slot basis. It is also combined with non-strict priority scheduling and priority queuing to support differentiated services in the design of an EPON system. Extensive simulation …

    ottawa-retro Repository record for A novel dynamic bandwidth allocation algorithm with QoS support for EPON access networks (opens in a new tab)

  10. Underactuated Single-Wheeled Mobile Robot Mimicking a Human-Ridden Unicycle

    … mechanical design, electronics selection, control design, computer programming and system integration. A mathematical model is derived by Euler-Lagrange method for simulation study and analysis. Four formulae for lateral set-point control and turning-motion control are derived. …

    nus Repository record for Underactuated Single-Wheeled Mobile Robot Mimicking a Human-Ridden Unicycle (opens in a new tab) Download file for Underactuated Single-Wheeled Mobile Robot Mimicking a Human-Ridden Unicycle (opens in a new tab)

  11. A nonparametric change-point model for Phase II analysis.

    In statistical process control, the control chart based on the change-point model does not require prior knowledge about the parameters, making it an attractive technique. So far, change-point control charts are only developed under a normal assumption. But when the underlying distribution is not …

    umn Repository record for A nonparametric change-point model for Phase II analysis. (opens in a new tab)

  12. Modeling and control of pumping stations and equalization basins

    … The major objective of this study is to develop control strategies to minimize these variations. A dynamic model has been developed for the operation of fixed speed pumping stations. The optimum control strategy based on this model can reduce the on-off pump cycles up to 86% for a typical day as …

    rice Repository record for Modeling and control of pumping stations and equalization basins (opens in a new tab)

  13. Wi-Fi attack mitigation: analysis, design and implementation

    … to support the attack detection and access point control functions. By connecting the Routerstation to the access point, the ordinary 802.11 wireless networks can be endued with our attack detection and mitigation strategy.

    alabama Repository record for Wi-Fi attack mitigation: analysis, design and implementation (opens in a new tab)

  14. Design and analysis of a 9 DOF : hybrid parallel robot

    … to test the developed theoretical model. The control strategies of the robot were developed and tested based on both point to point control and continuous path applications. The path between two points was selected based on the stiffness of the system in a particular position and orientation. …

    birmingham Download PDF for Design and analysis of a 9 DOF : hybrid parallel robot (opens in a new tab)

  15. Control system development for a powered upper-limb orthosis

    … work is to develop an efficient and simple control strategy and design associated signal input devices for a powered upper-limb orthosis. The criteria are to miniiriize the complexity of the control operations required by the user and to improve reliability of a powered orthosis while …

    ubc Repository record for Control system development for a powered upper-limb orthosis (opens in a new tab) Download PDF for Control system development for a powered upper-limb orthosis (opens in a new tab)

  16. Acoustic cloaking and illusions using active methods

    … thesis is to investigate the use of active noise control techniques to generate acoustic cloaks and acoustic illusions for rigid and elastic structures in a free field. Analytical models to describe the acoustic responses of rigid and elastic cylinders under plane wave and monopole source …

    unsw Repository record for Acoustic cloaking and illusions using active methods (opens in a new tab)

  17. Adaptive control for fault tolerant autonomous launch and recovery

    This work presents the use of adaptive control methodologies for the recovery to an aircraft carrier of an autonomous fixed wing aircraft. The control architecture used is model reference adaptive control that is implemented in the pitch, roll, yaw, and airspeed axes to provide 6 degree-of-freedom …

    wichita-thes Repository record for Adaptive control for fault tolerant autonomous launch and recovery (opens in a new tab)

  18. Stability challenges and solutions in current-mode controlled power electronic converters

    … issues in single-staged and multi-staged current controlled power electronic converters. Most current-mode control (CMC) approaches suffer from sub-harmonic oscillations. An external ramp is usually added to solve this problem. However, to guarantee stability this ramp has to be designed for the …

    must-thes Repository record for Stability challenges and solutions in current-mode controlled power electronic converters (opens in a new tab)

Page 1 of 3