Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 143 for “"point load"”.
-
Dynamic plastic deformation of a free ring subjected to a point load
The permanent deformation of a rigid perfectly-plastic unsupported thin ring subjected to a concentrated time-dependent force acting along a diameter is calculated. The analysis is developed for a force pulse of arbitrary shape, and numerical results are obtained for the special case of a …
-
Infinite Orthotropic plate on an elastic foundation with a traverse point load
… elastic foundation subjected to a transverse point load. We are concerned with the stress distribution in the vicinity of the load application. Based on the assumption of a uniform stress distribution under the load, a Fourier Transform technique is utilized to formulate and solve the problem …
-
Point Load Distribution in Overhang Slabs: Effects of Model Complexity and Load History
Understanding the distribution of point loads in overhang slabs is crucial for improving design and assessment of reinforced concrete bridges. The concept of an effective width allows shear forces and bending moments to be evaluated at critical sections and used in the dimensioning of the slab. …
-
Wave Propagation in a Half-Space Due to an Interior Point-Load Parallel to the Surface
Made available in DSpace on 2014-12-10T22:21:56Z (GMT). No. of bitstreams: 1 7317264.pdf: 4170417 bytes, checksum: 9560eeb565428c3c337791007289e26a (MD5) Previous issue date: 1972
-
Correlations Between Index Properties and Unconfined Compressive Strength of Weathered Ocala Limestone
… and were tested under unconfined compression, point load, or indirect tensile conditions. Qualitative results show the average unit weight decreases with an increase in weathering state and the range of index strength values decreases with an increase in weathering state. The data also shows …
-
Response to changes in humidity of shales in tunnels
… the samples were subjected to standardized point load and slake durability tests to quantify the affect humidity has on the strength and slake durability of shale. After three cycles of humidifying and drying, the results of this study suggest that exposure to humidity impacts strength more …
-
Infinite finite element
… known. Both involve a semi-infinite solid, one loaded with a surface perpendicular point load, and the other with a surface parallel point load. The results compare favourably with the theory of elasticity solutions.
-
Pervasively-Altered Rocks in the Glenbrook Creek Watershed: Effects of Slope Stability, Erosion, and Sediment Composition on Lake Tahoe's Water Quality
… sample collection. Laboratory analyses included point load strength index testing, uniaxial compression strength testing, slake durability, density determination, calculation of Hoek-Brown rock mass strength, particle size distribution analyses to determine coefficients of uniformity and …
-
Evaluation of microstructure response under various loading and boundary conditions to aid in the establishment of a threshold criterion for mild traumatic brain injury
… evaluate microtubule strength properties, that load can be used as a starting point to evaluate internal stress failure criterion for such structures. To that end, the current research is investigating MT strength by replicating the loading and boundary conditions in a finite element model. This …
-
Examining the Different Snap-Through Characteristics of Bistable CFRP Composite Laminates
… in complete detail. Moreover, symmetric loading conditions have been extensively studied based on the classical lamination theory, but the asymmetric loading conditions received far less attention. Therefore, this study examines an asymmetric, localized point load on a [0°/90°] bistable …
-
Adhesive Contact of a Conical Frustum Punch with a Transversely Isotropic or an Orthotropic Elastic Half Space
… with an orthotropic half space, the problem of a point load applied on the half space is first solved by using the double Fourier transform method. The solution for the adhesive contact problem is then obtained through integrating the former solutions over the punch surface.
-
Multi-agent Payload Manipulation and Transportation\\ using Small Scale Quadrotor Platforms
… linkage between agents while supporting a point-load. Additionally, a overlaying unit-vector consensus protocol was implemented as a simple means for agent distribution around a destination and formation orientation. All demonstrations were carried out in both simulation and on our custom …
-
Slip and Uplift Effects in Composite Beams
… beam incorporating a cellular deck under a two point load and simple support conditions is also reported. In addition, the experimental results are compared with the computed results obtained from an existing finite difference formulation.</p>
-
An assessment of least squares finite element models with applications to problems in heat transfer and solid mechanics
… beam with linearly varying distributed load along the beam and a point load at the end, a simply supported beam with a point load in the middle, and a beam fixed on both ends with a distributed load varying cubically. The first two examples were solved using the least squares model based …
-
Fatigue crack growth model for arbitrary planar cracks subjected to non-uniform stress field induced by variable amplitude loading
… components that are subjected to cyclic loads frequently contain imperfections which can rationally be assessed using linear elastic fracture mechanics. Fatigue crack growth models make use of the stress intensity factor (SIF) range and the maximum SIF to describe the driving force for …
-
Investigation into the mechanical behaviour of intact rock at different sizes
… on samples having a range of sizes including point load, uniaxial and triaxial compressive tests. The majority of the material tested was Gosford sandstone, however, testing on other rock types was also performed. A unified size effect law, based on work by Bazant (1997b) involving fracture …
-
Geomechanical Properties of the Montney and Sulphur Mountain Formations
… fluorescence, helium pyncnometry, microhardness, point load strength testing, unconfined compressive strength testing, Brazilian testing, multi-stage triaxial testing, and ultrasonic pulse transmission. The Montney Formation and its outcrop equivalent, the Sulphur Mountain Formation, are studied. …
-
Studies on droplet-microcantilever platform under fluid flow in mini wind tunnel
… Tip deflection of a microcantilever beam with a point load near the free end under the fluid flow is studied to develop fluid load augmented micro balance. Water droplets of various sizes are used to provide point load. The water droplet is placed over micro cantilever beam at dimensionless …
-
Studies on droplet-microcantilever platform under fluid flow in mini wind tunnel
… Tip deflection of a microcantilever beam with a point load near the free end under the fluid flow is studied to develop fluid load augmented micro balance. Water droplets of various sizes are used to provide point load. The water droplet is placed over micro cantilever beam at dimensionless …
-
The transverse dynamics of rotating imperfect disks
… disk acted upon by a transverse, non-oscillatory point load stationary in space. Such a model is known to accurately predict certain relevant aspects of the behaviour of a circular saw in its operating environment. Initially the free response of a non-rotating perfect disk is considered. This …
Page 1 of 8