Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 335 for “"polyether"”.
-
Tribological behavior of unfilled and carbon fiber reinforced polyether ether ketone/polyether imide composites
The friction and wear of injection molded Poly(ether ether ketone) (PEEK) and Poly(ether imide) (PEI), PEEK/PEI blends with the weight compositions of 50/50 %, 70/30 %, and 85/15 %, with and without short carbon fibers were measured in a pin(52100 steel ball)-on-disk(polymer blend) configuration …
-
INVESTIGATION OF POLYETHER AND POLYETHER COMPOSITES AS ELECTROLYTES FOR ADVANCEMENT TOWARDS LITHIUM METAL BATTERIES
Epoxides, polyether precursors, are favorable materials for many applications. They have a ring strain that promotes polymerization, diverse functionalities, and are relatively easy to synthesize through sustainable means. Although epoxide polymerization can be traced back a few decades, it wasn’t …
-
LUBRICATION OF POLYETHER ETHER KETONE (PEEK)
Polyether Ether Ketone (PEEK), an engineering polymer with many advantages such as lightweight, high thermal stability, high strength coupled with toughness, has often been used as a substitute for metals in applications such as bearings, piston parts, pumps and even biomaterials. However, it shows …
-
Darstellung neuartiger Carbosilan- und Polyether-Glycodendrimere
… the course of this thesis, novel carbosilane and polyether glycodendrimers were prepared. These structures are potential inhibitors of mannose binding lectins of E. coli. Further, the access to these glycodendrimers was evaluated in view of synthetic chemistry. A tetravalent carbosiloxane …
-
Investigation of a polyether trisiloxane surfactant
Thanks to their adaptability and high efficiency compared to traditional carbon based surfactants, silicone surfactants are a success in many different applications, from pesticides to cosmetics, polyurethane foam, textile and car care products. In spite of those numerous applications, no …
-
The Antibacterial Activity of Silicone-Polyether Surfactants
… relationships of nonionic silicone polyether surfactants in solution. Azide/alkyne click chemistry was used to prepare a series of eight compounds with consistent hydrophilic tails (8- 44 poly(ethylene glycol) units), but variable hydrophobic heads (branched silicones with 3-10 …
-
Synthesis of novel acyclic and cyclic polyether ligands
… for the preparation of novel acyclic and cyclic polyether ligands are described in this dissertation. Several series of neutral crown and lariat ethers were prepared by reaction at a ring carbon of a lariat ether, reaction on the functional side arm of a lariat ether, and reduction of …
-
Novel methodologies for the construction of polyether libraries
<p>Polyether antibiotics are a class of natural products obtained by the fermentation of <i>Streptomyces sp.</i> They display a broad range of biological properties and are of commercial importance in the veterinary field as anticoccidial agents and growth promoters. Due to the complexity of their …
-
Synthesis of a Family of Polyether-Substituted Phenacenes
… be used. A family of [<em>n</em>]phenacenes with polyether solubilizing groups has been synthesized using two separate divergent-convergent synthetic schemes. The central reaction vital to the synthesis is the ultraviolet light induced photocyclization, which allows for elongation of the phenacene …
-
Development of a new synthetic platform for polyether materials
… opportunity for the exploration of alternative polyether materials. Polyethers are a class of polymers that have the potential for remarkable multi-functionality in a materials platform based on the variety of readily available, inexpensive, and functional monomer precursors called epoxides. The …
-
Metal cation complexation and separation with macrocyclic polyether ligands
At Hanford, Washington, the Department of Energy maintains a site that contains approximately 6x10^7 gallons (2 x l0^8 liters) of waste left over from the development of nuclear weapons after WWII. This volume of material is too great to be stored in Yucca Mountain. Separation of the high-level …
-
Biodegradation studies of polyether polyurethane in a landfill site
Polyether polyurethane rigid foams have always been considered as inert materials due to their extreme stability. Urethanes and polyethers, which are the main constituents of the polymer structure, are well known for theirstability and resistance to hydrolysis.t 32 These groups give to the foam its …
-
Synthesis and characterization of phosphorous containing macromolecular polyether compounds
A radioisotope of rubidium, 82Rb is used in positron emission tomography. Neutral crown ethers and cryptands have been studied as carrier ligands for Rb+ but exhibit low ion carrying capacity and high toxicity. The present study involved investigating a lariat ether containing an ionizable …
-
Modelling and Parameter Estimation of a PO3G Polyether Process
This thesis focuses on developing advanced fundamental models for production of polytrimethylene ether glycol (PO3G) from bio-based 1,3 propanediol. These models describe the time-varying concentrations of monomer, oligomers, end-groups and by-products (i.e., unsaturated ends, water, and propanal) …
-
Hyperverzweigte Polyether-Polyole auf Basis von Trimethylolpropan und Pentaerythrit
… Synthese von verzweigten und hyperverzweigten Polyether-Polyolen auf Basis von Trimethylolpropan (TMP) und Pentaerythrit (PEA) durch säurekatalysierte Polykondensation in einer anspruchslosen Eintopfreaktion untersucht. Es konnte gezeigt werden, dass eine erfolgreiche Umsetzung der …
-
Synthesis and characterization of new polyether-based advanced materials
Thesis (M.S.)--Michigan State University, Department of Chemistry, 2003
-
Mathematical Models of Polyether Production From Bio-Based 1,3-Propanediol
This research develops mathematical models to simulate PO3G productions using super-acid catalyst in a batch reactor, to predict super-acid catalyst effects on the polymerization rates and product qualities. The models describe dynamic changes in concentrations of monomer, water, propanal, linear …
Page 1 of 17