Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"polyether sulfone"”.

  1. RF Heating of Laser-Induced Graphite (LIG) on Polymer Surfaces

    … structures may be produced from polyimide (PI), polyether imide (PEI), polyether sulfone (PESU), polyether ether ketone (PEEK), and polycarbonate (PC) using a conventional laser cutting machine. The graphitic structures are also conductive in addition to being RF responsive. Exposure of LIG to RF …

    tamu Repository record for RF Heating of Laser-Induced Graphite (LIG) on Polymer Surfaces (opens in a new tab)

  2. DEVELOPMENT OF PEPTIDE-BASED BIOMATERIALS FOR ANTIFOULING AND ANTIVIRAL APPLICATIONS

    … production costs. Polyethylene glycol (PEG) and polyether sulfone (PES) are two representatives of polymeric membrane materials that are widely used in the purification process. However, the susceptibility to oxidative degradation and the hydrophobic membrane surface are two significant …

    jhu Repository record for DEVELOPMENT OF PEPTIDE-BASED BIOMATERIALS FOR ANTIFOULING AND ANTIVIRAL APPLICATIONS (opens in a new tab)

  3. Electrically conductive hollow fiber membrane development: addressing the scalability challenges and performance limits of conductive membrane fabrication

    … onto the interior surface of commercial polyether sulfone HF membranes. In a design-of-experiments model, feed pressure and crossflow velocity were shown to directly impact composite membrane conductivity and permeability. The highest permeability (~2900 LMH/bar) and conductivity (~670 …

    mcmaster Repository record for Electrically conductive hollow fiber membrane development: addressing the scalability challenges and performance limits of conductive membrane fabrication (opens in a new tab)

  4. Develpment of novel Proton Exchange membranes (PEM)

    Proton Exchange Membrane (PEM) was developed for the use in PEM fuel cells. Membranes were cast from various polymers and composite membranes were prepared with heteropoly acid (HPA) particles. Studies were conducted on various polymers and their possible application in fuel cells. Proton …

    unr Repository record for Develpment of novel Proton Exchange membranes (PEM) (opens in a new tab)

  5. Influence of Ag Nanoparticle Loading on Dye and Salt Removal Efficiency of Graphene Oxide Membranes

    … GO–Ag NP composite membranes were fabricated on polyether sulfone (PES) substrates via vacuum-assisted filtration, utilizing a series of Ag NP loadings to evaluate their influence on nanofiltration performance. A comprehensive suite of characterization techniques was employed: X-ray diffraction …

    houston Repository record for Influence of Ag Nanoparticle Loading on Dye and Salt Removal Efficiency of Graphene Oxide Membranes (opens in a new tab) Embargoed until 2027-05-01

  6. Measuring the Mechanical Properties of Individual Polymer Nanofibers

    … to other nanofiber materials, specifically polyether sulfone (PES) and polyvinylidene difluoride (PVDF), to determine its general applicability. This project was executed in two cycles, described below: Cycle 1: Determined a method to generate aligned electrospun PA fibers for …

    umn Repository record for Measuring the Mechanical Properties of Individual Polymer Nanofibers (opens in a new tab)

  7. Fouling and aging in membrane filtration : Hybrid AFM-based characterization, modelling and reactive membrane design

    … thermal stability of surface chemically modified polyether sulfone (PES) membranes are investigated. The membranes’ physical (i.e., pore size, roughness), mechanical (i.e., tensile strength) and chemical characteristics (i.e., IR spectrum, and hydrophobicity) are evaluated. The quantitative …

    njit Repository record for Fouling and aging in membrane filtration : Hybrid AFM-based characterization, modelling and reactive membrane design (opens in a new tab)

  8. Characterization of Composite Dust Generated During Milling of Uni-Directional and Random Fiber Composites

    … epoxy, polyester, phenolic, fluorocarbon, polyether-sulfone, and silicon. The most commonly used are epoxies and polyesters, which are less expensive than epoxies. It can build up on and short out computers, control panels and servomotors. In the air, it can be inhaled and threaten human …

    washington Repository record for Characterization of Composite Dust Generated During Milling of Uni-Directional and Random Fiber Composites (opens in a new tab)

  9. Development and modeling of a fabrication process for high-strength biomimetic porous polymer for medical implants

    Polyether ether ketone (PEEK) has become a popular candidate for use in medical implants. Unlike metal implants, PEEK does not create artifacts in radiographic evaluations, such as X-rays and CT scans, making it ideal for postoperative examinations. However, PEEK's chemical inertness limits the …

    texas Repository record for Development and modeling of a fabrication process for high-strength biomimetic porous polymer for medical implants (opens in a new tab)

  10. Evaluation of novel polyethersulfone membranes incorporating charged surface modifying macromolecules for the removal of pharmaceuticals and endocrine disrupting compounds from drinking water

    … macromolecules (CSMMs) in the manufacturing of polyether sulfone (PES) based membranes. The charged additives were expected to enhance the removal of PPCPs and EDCs by charge repulsion. Controls and three different CSMM (DEG-HBS, DEG-HBC and PPG-HBC) blended membranes were prepared at three …

    ottawa-retro Repository record for Evaluation of novel polyethersulfone membranes incorporating charged surface modifying macromolecules for the removal of pharmaceuticals and endocrine disrupting compounds from drinking water (opens in a new tab)

  11. Analysis of volatile organic compounds from food contact materials: paperboard and fluoropolymer-coatings

    … of the kitchenware articles, which were PTFE and polyether sulfone (PES). All samples were subjected to a threefold thermal extraction. During the second and third consecutive extraction, no substances were above the LOD, concluding that a removal and no new formation of the investigated PFAS as …

    qucosa-diss

  12. SURFACE POLYMERIZATION OF INORGANIC MATERIALS FOR RENEWABLE ENERGY, INTELLIGENT MATERIALS, AND BIO-MATERIALS APPLICATIONS

    … atom transfer radical polymerization (ATRP). Polyether sulfone (PES) and poly(ether ether ketone) (PEEK) were used as a polymer matrix. Phosphotungstic acid (PWA), phosphomolybdic acid (PMoA) and silicotungstic acid (SiWA) were used as HPA. It was found that the SiWA has a higher conductivity …

    unr Repository record for SURFACE POLYMERIZATION OF INORGANIC MATERIALS FOR RENEWABLE ENERGY, INTELLIGENT MATERIALS, AND BIO-MATERIALS APPLICATIONS (opens in a new tab)

  13. PATTERNING AND MODULATION OF OXIDE SURFACE PROPERTIES

    … of ionic liquid modified SPES (sulfonated polyether sulfone) was combined with designed morphological features to confer superhydrophobicity. On the other side, the polymeric surface was covered with a transparent titania layer active in the near UV-region, able to mineralize organic …

    milano Repository record for PATTERNING AND MODULATION OF OXIDE SURFACE PROPERTIES (opens in a new tab)