Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"polyethylene pipe"”.

  1. The mechanical behaviour of polyethylene pipe systems

    The design of polyethylene (PE) pipelines for applications in the gas, water and chemical process industries has been based on data mainly obtained from stress rupture testing pipes only. In practice, installations are composed of both extruded pipe and injection moulded fittings which are joined …

    brunel Repository record for The mechanical behaviour of polyethylene pipe systems (opens in a new tab)

  2. Capacitive sensor technology for polyethylene pipe fault detection

    … sensors can be used to detect defects in polyethylene gas distribution pipes. Currently, there is no in ground detection system to find the defect. Catastrophic results can occur if gas leaks are present and ignite. Finite Element Analysis (FEA) software will be used to simulate how …

    wvu Repository record for Capacitive sensor technology for polyethylene pipe fault detection (opens in a new tab)

  3. External Pressure Testing of High Density Polyethylene Pipe

    … pressure of four inch diameter high density polyethylene pipe. This thesis is part of a three phase program and is a preliminary type of study.

    marquette Repository record for External Pressure Testing of High Density Polyethylene Pipe (opens in a new tab)

  4. Investigation of high density polyethylene pipe for highway applications: Phase II

    … of Phase I of the investigation of high density polyethylene pipe for highway applications by Klaiber et al (1996), information on the soil-structure interaction of 36 in. diameter polyethylene pipes with shallow cover for a small number of backfill qualities and types was accomplished. In this …

    iastate Repository record for Investigation of high density polyethylene pipe for highway applications: Phase II (opens in a new tab)

  5. Evaluation of granular backfill materials for large-diameter, high-density polyethylene pipe

    … (TxDOT) has used concrete or corrugated metal pipes in highway subsurface drainage applications. In recent times large-diameter HDPE thermoplastic pipes have emerged in the marketplace as a viable option. However, these pipes require a more care and control during installation. Because of this …

    ttu Repository record for Evaluation of granular backfill materials for large-diameter, high-density polyethylene pipe (opens in a new tab)

  6. Mineral Scale Buildup on Lined Versus Traditional Polyethylene Pipe Materials Subjected to Mine Influenced Waters

    … on-site in systems requiring extensive piping. Polyethylene (PE) pipes are popular in mining, including MIW, applications because they are chemically inert, and have relatively low costs, low density, and high flexibility. However, PE material is susceptible to abrasion. To combat this problem …

    vt Repository record for Mineral Scale Buildup on Lined Versus Traditional Polyethylene Pipe Materials Subjected to Mine Influenced Waters (opens in a new tab)

  7. Tracking the Effect of Accelerated Aging on Cross-Linked Polyethylene Pipe using Fourier Transform Infrared Microscopy

    Cross-linked polyethylene (PEX-a) pipes have been quickly replacing metal piping in home and industrial applications due their cost-effective manufacturing process, ease of installation, and long projected lifetimes. However, PEX-a pipes are not immune to oxidative degradation from their …

    guelph Repository record for Tracking the Effect of Accelerated Aging on Cross-Linked Polyethylene Pipe using Fourier Transform Infrared Microscopy (opens in a new tab)

  8. Evaluation of an integrated sewage pipe with ground heat exchanger for long-term efficiency estimation

    Extracting heat from a sewage pipe through a typical horizontal ground heat exchanger has recently been introduced as a renewable energy alternative to reduce fossil fuel usage. This paper presents a novel design for a ground heat exchanger that extracts heat from the surrounding soil and sewage …

    manitoba Repository record for Evaluation of an integrated sewage pipe with ground heat exchanger for long-term efficiency estimation (opens in a new tab)

  9. Sorption and desorption of the industrial chemical MCHM into polymer pipes, liners and activated carbon

    Polyethylene pipes and epoxy or polyurethane linings are increasingly used in drinking water infrastructure. As a recent introduction to the water industry, there are still many unknowns about how polymers will behave in the distribution system specifically relating to sorption and desorption of …

    vt Repository record for Sorption and desorption of the industrial chemical MCHM into polymer pipes, liners and activated carbon (opens in a new tab)

  10. Development and validation of coaxial cable sensors for damage detection of reinforced concrete structures

    … in design of a cable sensor is to replace the polyethylene pipe of a commercial cable with a rubber tube as a dielectric layer to increase the cable’s sensitivity up to 10 times. In this dissertation a new design of prototype cable sensor is proposed. The new sensors not only respond to the …

    must-thes Repository record for Development and validation of coaxial cable sensors for damage detection of reinforced concrete structures (opens in a new tab)

  11. Protection of Buried Flexible Pipes with a Geosynthetic: Experimental and Numerical Studies

    … of ways to enhance the performance of buried pipes and conduits. Attenuation of surface loads to protect the pipe include methods such as induced trenches, soil enhancement for cyclic loading, and protection from penetration during construction or accidents. Geosynthetic materials have also …

    ku Repository record for Protection of Buried Flexible Pipes with a Geosynthetic: Experimental and Numerical Studies (opens in a new tab)

  12. An assessment of the performance of high density polyethylene copolymers for natural gas distribution pipes

    The total thermoplastics pipe market in west Europe is estimated at 900,000 metric tonnes for 1977 and is projected to grow to some 1.3 million tonnes of predominantly PVC and polyolefins pipe by 1985. By that time, polyethylene for gas distribution pipe and fittings will represent some 30% of the …

    aston Download PDF for An assessment of the performance of high density polyethylene copolymers for natural gas distribution pipes (opens in a new tab)

  13. Economical feasibility of a ground-coupled heat pump for the Knoxville, Tennessee Area

    … a 675 foot coil using 1.25 inch nominal diameter polyethylene pipe was used. The pipe was laid at the depth of four feet in the middle of a six inch layer of sand that was used as a backfill material. The remaining volume of the trench was filled with the indigenous soil. The heating load for the …

    ut-knoxville Repository record for Economical feasibility of a ground-coupled heat pump for the Knoxville, Tennessee Area (opens in a new tab)

  14. Pavement Deterioration and PE Pipe Behaviour Resulting from Open-Cut and HDD Pipeline Installation Techniques

    … that does not require continuous trenching. HDD pipe installation techniques can reduce reinstatement costs, shorten construction periods, and lower social costs due to reduced user traffic delays. In this thesis, a detailed field study and numerical investigations was completed to quantify …

    waterloo Repository record for Pavement Deterioration and PE Pipe Behaviour Resulting from Open-Cut and HDD Pipeline Installation Techniques (opens in a new tab)

  15. Modeling contaminant transport in polyethylene and metal speciation in saliva

    … diffusivity and solubility in new and aged polyethylene materials for pipes and geomembranes. Diffusivity, solubility, polymer and chemical properties were measured for thirteen contaminants and six polyethylene materials that were new and/or aged in chlorinated water. Tree regression was …

    vt Repository record for Modeling contaminant transport in polyethylene and metal speciation in saliva (opens in a new tab)

  16. Advancing Potable Water Infrastructure through an Improved Understanding of Polymer Pipe Oxidation, Polymer–Contaminant Interactions, and Consumer Perception of Taste

    … unaware of how premise and buried polymer water pipes deteriorate and sorb/ desorb organic contaminants during normal operations and following water contamination events. These knowledge–gaps also prevent infrastructure managers from producing drinking water that optimizes mineral content for …

    vt Repository record for Advancing Potable Water Infrastructure through an Improved Understanding of Polymer Pipe Oxidation, Polymer–Contaminant Interactions, and Consumer Perception of Taste (opens in a new tab)