Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"polymer dissolution"”.

  1. Numerical Modeling of Polyvinyl Alcohol (PVA) Swelling and Dissolution in Water

    This study investigates the numerical models for polymer dissolution, with a long-term goal of developing high performance dissolvable elastomer from Polyvinyl Alcohol (PVA) replacing current not dissolvable rubber based materials. With fast development of hydraulic-fracturing in past 15 years, the …

    houston Repository record for Numerical Modeling of Polyvinyl Alcohol (PVA) Swelling and Dissolution in Water (opens in a new tab)

  2. Green Solvents for Polymer Applications

    … creating a knowledge gap in other areas. Polymer dissolution comprises at least 72% of solvent use in the EU, but is largely ignored in academic literature. This thesis addresses this disparity by uncovering new polymer-related applications for existing green solvents and identifying new …

    whiterose Download PDF for Green Solvents for Polymer Applications (opens in a new tab)

  3. Strategies for local drug delivery targeting the oesophagus

    … xanthan gum hydrogels were evaluated as viscous polymer viables with the in vitro retention, drug release and minimum inhibitory concentration values of the formulations measured. Xanthan showed prolonged retention on the oesophageal surface in vitro yet chitosan reduced the MIC value; both …

    aston Download PDF for Strategies for local drug delivery targeting the oesophagus (opens in a new tab)

  4. A study of the mechanisms of chemical cleaning of milk protein fouling deposits using a model material (whey protein concentrate gel)

    … on treating denatured whey protein gels as biopolymers, a chemical reaction controlled polymer dissolution cleaning mechanism has been proposed. The polymer dissolution plays a major role of removing proteinaceous deposits when treated with alkaline solutions under the flow conditions tested. …

    auckland-ms Repository record for A study of the mechanisms of chemical cleaning of milk protein fouling deposits using a model material (whey protein concentrate gel) (opens in a new tab)

  5. Low dielectric constant-based organic field-effect transistors and metal-insulator-semiconductor capacitors

    … laser evaporation (MAPLE) - of fabricating all-polymer field-effect transistors and MIS capacitors that circumvents inherent polymer dissolution and solvent-selectivity problems, is demonstrated. Pentacene-based OFETs incorporating PMMA and PVP gate dielectrics usually have high operating …

    missouri Repository record for Low dielectric constant-based organic field-effect transistors and metal-insulator-semiconductor capacitors (opens in a new tab)

  6. Hot melt extrusion for the production of controlled drug delivery systems

    … extrusion) and to investigate the influence of polymer type, drug solubility, drug loading and tablet size on drug release. In addition, an applicability-map was created in order to be a guideline of a suitable preparation technique for controlled release matrices. Matrices prepared from hot …

    fu-berlin Repository record for Hot melt extrusion for the production of controlled drug delivery systems (opens in a new tab)

  7. Polymeric films for buccal drug delivery

    … of the films, in vitro drug release and polymer dissolution, in vitro drug penetration through porcine esophageal mucosa were investigated. The plasticization effects of solvents, polyols and acids to the films were studied by tensile test, and differential scanning calorimetry, …

    aston Download PDF for Polymeric films for buccal drug delivery (opens in a new tab)

  8. Enhancing membrane filtration and persulphate advanced oxidation processes for water treatment

    … of a facile tailoring of the properties of polymeric membrane using the often-overlooked effects of polymer dissolution conditions; and the demonstration that activated persulphate AOP was effective in resolving the problem of membrane fouling. Other important findings include the …

    vu-aus Download PDF for Enhancing membrane filtration and persulphate advanced oxidation processes for water treatment (opens in a new tab)

  9. Applications of the novel bio-derived solvent Cyrene™ in polymer chemistry

    … Cyrene as polar aprotic solvents replacement in polymer dissolution for graffiti removal, extractions of flavonoids, dispersion of carbon nanotubes, polymerisation and/or production of poly(amide-imide) wire enamels and production of filtration membranes. Cyrene proved a good cleaning agent for …

    whiterose Download PDF for Applications of the novel bio-derived solvent Cyrene™ in polymer chemistry (opens in a new tab)

  10. Encapsulation of T4 bacteriophage in electrospun biopolymers

    … to the fibre core, protected by the outer polymer shell. Depending on the polymer system used the rate of T4 bacteriophage release from the coaxial electrospun fibres varied. When hydrophilic poly(ethylene oxide) (PEO) was used as the polymer shell layer, immediate release of T4 …

    ubc Repository record for Encapsulation of T4 bacteriophage in electrospun biopolymers (opens in a new tab) Download PDF for Encapsulation of T4 bacteriophage in electrospun biopolymers (opens in a new tab)

  11. Correlating macroscopic rheological behaviour to microstructure of polymer flocculated Mature Fine Tailings (MFT)

    … in their vicinity. Treatment of tailings with polymers (combined with other processes such as thin-lift drying, atmospheric fines drying) is one of the preferred methods for capturing the suspended solids and releasing the trapped water. However, the fundamental understanding of microstructure …

    calgary Repository record for Correlating macroscopic rheological behaviour to microstructure of polymer flocculated Mature Fine Tailings (MFT) (opens in a new tab)

  12. REDOX-ACTIVE POLYMERS AS CATHODE MATERIALS FOR ENERGY STORAGE APPLICATIONS

    Organic and polymeric electrodes have great properties and tenability enabling them to become high-energy and high-power cathode materials for electrical energy storage(EES) applications. Two main classes of polymeric materials were explored, investigated, and evaluated as promising electrodes for …

    cornell Repository record for REDOX-ACTIVE POLYMERS AS CATHODE MATERIALS FOR ENERGY STORAGE APPLICATIONS (opens in a new tab)

  13. Fabrication of Polymeric Ultrafiltration Membranes Using Ionic Liquids as Green Solvents

    … generation of solvents for the fabrication of polymeric ultrafiltration membranes. This study has investigated the molecular interactions between imidazolium-based ionic liquids and polymeric materials including cellulose acetate and polybenzimidazole (PBI). The studied ionic liquids were …

    nus Repository record for Fabrication of Polymeric Ultrafiltration Membranes Using Ionic Liquids as Green Solvents (opens in a new tab) Download file for Fabrication of Polymeric Ultrafiltration Membranes Using Ionic Liquids as Green Solvents (opens in a new tab)

  14. Modeling of polymeric materials with applications in active materials and additive manufacturing

    Polymeric materials used in the settings of active materials and additive manufacturing offer unique challenges for which high fidelity multiphysics modeling would greatly assist in improving processing and component function during service. In recent years there have been many advances in …

    gatech Repository record for Modeling of polymeric materials with applications in active materials and additive manufacturing (opens in a new tab)

  15. SOLVENT-TARGETED RECOVERY AND PRECIPITATION (STRAP): FEEDSTOCK PRE-PROCESSING AND HANDLING, DISSOLUTION, CENTRIFUGAL SEPARATION AND NONDISSOLVED SOLIDS DRYING

    … divided into two main technological processes: dissolution and precipitation. In this proposal, the focus will be on 1) the feedstock pre-processing and handling for uniform and continuous solid material dosing, 2) the high shear and turbulent mixing for fast dissolution, 3) the centrifugal …

    mtu Repository record for SOLVENT-TARGETED RECOVERY AND PRECIPITATION (STRAP): FEEDSTOCK PRE-PROCESSING AND HANDLING, DISSOLUTION, CENTRIFUGAL SEPARATION AND NONDISSOLVED SOLIDS DRYING (opens in a new tab)

  16. Fabrication of polyvinylidene fluoride membranes using gamma-valerolactone as an alternative green solvent

    … and water ternary system using a developed “polymer dissolution in a vial” (PDV) method. Results obtained from cloud points analysis and literature studies were decisive in determining the location of the demixing boundary curve and suitable casting compositions. Furthermore, comparative …

    strathclyde Repository record for Fabrication of polyvinylidene fluoride membranes using gamma-valerolactone as an alternative green solvent (opens in a new tab)

  17. A new risk analysis of clean-in-place (CIP) milk processing.

    … and Xin, Chen & Ozkan (2004) is based on a polymer dissolution process. This model requires input values of temperature of the cleaning solution (T), critical mass of the deposit (m[subscript]c) and cleaning rate (R[subscript]m). The output parameters of particular interest are the rate of …

    adelaide Repository record for A new risk analysis of clean-in-place (CIP) milk processing. (opens in a new tab)

  18. Lowering lattice forces in drug substance crystals to improve dissolution and solubility

    … to increase the solubility, supersaturation, and dissolution rate. The conversion to an ionic liquid and the embedding of the compound in a pH-sensitive matrix in an amorphous state were investigated with an acidic compound and its pro-drug. The tetrabutylphosphonium (TBPH) salt showed the most …

    wurz-thes Repository record for Lowering lattice forces in drug substance crystals to improve dissolution and solubility (opens in a new tab)