Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 74 for “"polymer matrix composite"”.
-
Corrosion of Aluminum Alloys-Polymer Matrix Composite Interfaces
… carbon-fiber (CFRP) and E-glass/epoxy (GFRP) composite laminated aluminum alloys [i.e., Al 1100-H14, Al 5456-H116 (non-sensitized), Al 5456-H116 (sensitized), & Al 7075-T6] was studied to characterize the interfacial corrosion between the composite and aluminum substrate. Samples were placed …
-
Development and Fabrication of Thermally Conductive Polymer Matrix Composite Foams
… research aims to develop thermally conductive polymer matrix composite (PMC) foams that can provide a solution to the heat management of new electronic devices. First, an analytical model was constructed to confirm the feasibility of foaming-induced keff enhancement. This model considered …
-
Time-dependent damage evolution in multidirectional polymer matrix composite laminates
Multi-directional polymer matrix composite materials are increasingly used in load-bearing structural applications ranging from primary aircraft structures and automotive parts to rehabilitation of bridges. Long-term durability, characterized by time-dependent degradation in strength (known as …
-
Experimental investigation of water absorption in polymer-matrix composite structures
Polymer-matrix composites (PMCs) are commonly used in modern sailplanes in the primary load-bearing structure. All competition-class sailplanes make use of water ballast tanks in the wings to improve performance in certain weather conditions. Due to the adverse effects that water has on composite …
-
Polymer matrix composite nanodielectrics as compact capacitive energy storage systems
In this thesis, composite systems of epoxy resin and different ceramic nanoparticles (BaTiO3, SrTiO3 and Barium Strontium Titanate (BST) mixture) have been prepared and studied varying the filler content. The main goal of this study was the examination of the nanocomposites capability to store and …
-
Self-Healing Polymer Matrix Composite Matrix Materials Using Hindered Urea Bonding
Polymer matrix composites (PMCs) utilize thermoset resins in large part because of their low starting molecular weights which allow for good reinforcement infiltration prior to curing. Formed networks owe much of their mechanical properties to covalent crosslinks tethering molecules within the …
-
Corrosion of Aluminum Alloys-Polymer Matrix Composite Interfaces in Diverse Natural Atmospheric Environments
… of carbon-fiber/epoxy and E-glass/epoxy composite laminated aluminum alloys [e.g., Al 1100-H14, Al 5456-H116 (non-sensitized), Al 5456-H116 (sensitized), and Al 7075-T6] was studied to characterize the interfacial corrosion between the composite and the aluminum substrate. Samples were …
-
Micromechanics Based Model for Long Fibre Polymer Matrix Composite Materials using a Functionally Graded Interphase
In order to incorporate more composite materials in mass production vehicles within the automotive industry, compression moulding manufacturing techniques have been de- veloped. Using processes such as Sheet Moulding Compound (SMC), and Direct Long Fibre Thermoplastic (DLFT), composite parts can be …
-
Investigation of hydrothermal behaviour and active degradation mechanisms of mechanical properties of polymer matrix composite
… the mechanical properties of different types of composite materials. In the framework of this study, the behavior of epoxy resins (nano-reinforced and non-reinforced), epoxy and cyanate ester resin fiber reinforced composite materials (nano-reinforced and non-reinforced), as well as the behavior …
-
ENHANCING BALLISTIC IMPACT RESISTANCE OF POLYMER MATRIX COMPOSITE ARMORS BY ADDITION OF MICRO AND NANO-FILLERS
… the ballistic impact resistance of hybrid polymer matrix composites through addition of micro- and nano-particles as fillers is the principal goal of this research. Development of light-weight ballistic plates, made of polymer matrix composites with improved ballistic resistance, can offer …
-
Simulation and testing of low velocity impact damage and compression after impact for polymer matrix composite laminates.
… degradation of strength and stiffness of a polymer matrix composite laminate, yet the mechanisms of damage initiation and propagation are not fully understood. In this research, we propose a three-dimensional finite element (FE) modeling approach to investigate damage mechanisms during a …
-
Influence of Material Selection and Fabrication Process Repeatability on Mechanical Properties of Glass-Polymer Matrix Composite Structures
… obtained utilizing one design of a single layup composite plaque, three sources of glass fibers and a single, industry accepted resin to produce a repeatable fabrication process. This thesis has investigated the following: 1. Whether the type of glass (E-Glass, S-Glass, and R-Glass) influences …
-
Experimental study of defects and delaminations produced in abrasive waterjet cutting and drilling of polymer matrix composite.
The purpose of the work reported in this thesis was to further the investigation of the problem of bending in a circular disk of variable thickness. Many difficulties were encountered in this research arising from the use of a new material for the photoelastic model, and it was necessary to …
-
INVESTIGATION OF THE EFFECT OF THE 2.5-D CARBON FABRIC CONSTRUCTION ON FABRIC REINFORCED POLYMER MATRIX COMPOSITE TOUGHNESS
… OF THE FACT THAT CARBON FABRIC REINFORCED COMPOSITES HAVE A BETTER INTERLAMINAR FRACTURE TOUGHNESS AND SUPERIOR IMPACT BEHAVIOUR TO THEIR UNIDIRECTIONAL COUNTERPARTS IS THE MAIN GOAL OF THIS STUDY. THE RELATION BETWEEN FABRIC CHARACTERISTICS AND INTERLAMINAR FRACTURE TOUGHNESS IS SOUGHT, …
-
An Experimental and Computational Study on Co-Cured Hybrid Metal-Polymer Matrix Composite Interfaces in High Temperature Hybrid Composite Laminates
… such as high temperature and pressure, hybrid composite laminates that are comprised of both metallic and polymeric constituents are under development. Because of the mismatch in properties of different layers in these hybrid laminates, the interfacial regions between polymer and metal are …
-
Crack growth investigation of aluminum fiber metal laminates under fatigue loading.
… interleaved with layers of a graphite fiber-polymer matrix composite (PMC) material. AFMLs combine the attractive features of aluminum with the advantages of traditional graphite polymer-matrix composite. There are a number of anticipated benefits of such a material including weight …
-
An Experimental Investigation of Spall Fracture in Neat Epoxy and an Epoxy/Carbon Nanotube Composite
… on characterizing the mechanical properties of a polymer-matrix composite. Load frame testing was carried out to measure mechanical properties at quasi-static strain rates, while plate impact experiments were conducted to examine material response under dynamic loading conditions. Successful …
-
Concepção de blindagem balística do helicóptero AS-350 a partir de análises experimentais
… system for the AS-350 helicopter, using a polymer matrix composite reinforced with para-aramid and glass fibers. Considering airworthiness requirements and restrictions determined by the manufacturer, an analytical method was used to study the effects of the proposed armor on the weight and …
-
Phase field modeling of the defect evolution and failure
… and the yield criteria and failure mechanisms in polymer matrix composite are the two major topics in this work. In the first part of the work, a phase field dislocation dynamics (PFDD) approach is introduced, which tracks the evolution of the dislocations in ultrafine and nano grained metals and …
-
Material Characterization and Life Prediction of a Carbon Fiber/Thermoplastic Matrix Composite for Use in Non-Bonded Flexible Risers
… are being studied. In the present case, a Polymer Matrix Composite (PMC) is being considered as a replacement for carbon steel in flexible risers manufactured by Wellstream Inc., Panama City, Florida. The Materials Response Group (MRG) at Virginia Tech had the primary responsibility to …
Page 1 of 4