Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 79 for “"polymer modification"”.
-
Effect of polymer modification on the properties of asphalt concrete
Thesis (M.S.)--Michigan State University. Department of Materials Science & Mechanics, 1999
-
Polymer Modification via Vapor Phase Infiltration for Chemically and Mechanically Resilient Membranes
… are highly stable but costly to manufacture, polymeric membranes have the greatest market share because of their low cost and scalable production. However, many of these polymers are unstable in organic solvents and at high temperatures, which has limited their use in applications requiring …
-
Optimising Recording & Stimulation Performance of Neuronal Microelectrode Arrays through Macroporous Conducting Polymer Modification
… maintaining the desired geometric area involve modification with rough, conductive electrode coatings, such as conducting polymers (CPs). This research aims to investigate a macroporous templated CP based on poly(3,4-ethylenedioxythiophene)/polystyrene sulphonate (PEDOT/PSS) hypothesised to …
-
Correlation between multiple stress creep recovery (MSCR) results and polymer modification of binder
… by the heavy use of the Northeast Corridor. Polymer modification of asphalt, which can improve both low and high temperature performance, is already available; however, but in many cases traditional Superpave testing is not sensitive enough to quantify the impact of modification, dimensioning …
-
Synthesis and fabrication of nanostructional functional polymeric materials via plasma processes and polymer modification
Plasma processes and polymer modification are two versatile tools for the fabrication of polymer nanostructures and nanopatterns. Nanostructures of functional polymers, such as fluoropolymers, electroactive polypyrrole (PPY), and others, can be prepared potentially via plasma processes or polymer …
-
An investigation of polyolefin manufacturing technology: Mathematical modelling of polymerization and polymer modification processes
… The second part deals with the chemical modification of these polymers by free radical methods during the extrusion process. Free radical copolymerization of ethylene in high pressure reactors is considered. Kinetic mechanisms to describe the polymerization rate and polymer properties, …
-
SCALABLE FABRICATION OF MIXED-MATRIX MEMBRANES FOR GAS SEPARATIONS: POLYMER-MODIFICATION-ENABLED IN-SITU METAL-ORGANIC FRAMEWORK FORMATION
… membranes (MMMs) combining the advantages of polymer and inorganic membranes have been intensively studied for gas separations by incorporating molecular sieves such as zeolite, silica, and metal-organic framework (MOF) to a polymer matrix. Despite the potential, there have been no commercial …
-
Real-Time Monitoring and Characterization of Smart Cement and Soil with Polymer Modification to Control Gas Leakage and Corrosion.
… at different temperatures, the effect of polymer addition has been investigated. With different additives, the sensing properties of smart Class H cement is monitored for field applications. Research is done on different types of cement additives to check their efficacy to control …
-
BIOLOGICAL MATERIALS: PART A. TEMPERATURE-RESPONSIVE POLYMERS AND DRUG DELIVERY AND PART B. POLYMER MODIFICATION OF FISH SCALE AND THEIR NANO-MECHANICAL PROPERTIES
… affects of block sequence of amphiphilic block copolymers prepared from on a new and versatile class of monomers, oligo(ethylene glycol) methyl ether acrylate (OEGA) and the more hydrophobic di(ethylene glycol) methyl ether methacrylate (DEGMA). Polymers from these monomers are biologically safe …
-
Development of 2-D Nanostructured Layered Hydroxy Salts (LHSs) and Hydroxy Double Salts (HDSs) for New Applications: Anionic Exchange Kinetics and Polymer Modification
Hydroxy double salts (HDSs) and layered hydroxy salts (LHSs) are a class of 2-D nanostructured materials with nanometer sized galleries. These compounds exhibit interesting physical properties and have many potential and demonstrated applications in various fields, including: anion separations, …
-
Development of a new test procedure to evaluate the moisture susceptibility of hot mix asphalt
… was performed: gradation, NMAS, traffic, polymer modification, aggregate type, permeability, asphalt content, FAA, RAP, and frequency for dynamic modulus testing. The factors affecting AASHTO T283 are polymer modification, aggregate type, permeability, and RAP. The factors affecting …
-
Interaction between recycled tire rubber, polymers and high amount of reclaimed asphalt pavements
… benefit of using CR is being an alternative for polymer modification. Polymer modification of asphalt binders has gained quite a large popularity in many transportation agencies, primarily due to the superior crack and rut-resistant performance. However, added cost of polymer modification results …
-
Test Development and Material Characterization of Hot Poured Crack Sealant at Low Temperature
… of the microstructure analysis show that with polymer modification, the low temperature tensile property of the sealant improves. However, if the ground tire rubber (GTR) is added, the improvement of tensile property is reduced, but the flexural strength is increased.
-
Exploring the Black Space of Compressive and Shear Modulus
… and the other three were modified with polymers and acids. Additionally, Polyphosphoric acid (PPA) is compared to the more traditional SBS polymer modification. PPA is currently prohibited in Arkansas because of a lack of information on its field performance. Three tests were performed: …
-
Influence of modifiers on Palladium based nanoparticles for room temperature formic acid decomposition
… study. This work explores a range of novel modification techniques that alter the activity of Pd nanoparticles to decompose formic acid to H<sub>2</sub> and CO<sub>2</sub>. The methods used are the addition of polymers, attaching various functional groups to the surface of the catalyst …
-
Development Of Optically Responsive Cytokine Cancer Immunotherapies
… that are reversibly inactivated via chemical modification with photo-labile polymers. Wavelength-specific light exposure restores the receptor binding ability of these "photo-cytokines", thus modulating their activity on immune cells by several orders of magnitude. We first establish that …
-
METAL-FREE SELECTIVE SP3 C-H IMINATION AND COVALENT POSTSYNTHETIC MODIFICATION OF POLYSTYRENE BY DIRECT C-H AMINATION
… can improve the properties of commodity polymers. Transition-metal-catalyzed C–H amination has emerged as a powerful tool for C–N bond formation, but these reactions typically rely on nitrogen protecting groups such as sulfonamides, which limits substrate scope and requires multiple …
-
Precise design and surface modification of poly(ε-caprolactone)-based 2D assemblies
… 2D assemblies and their selective surface modification. Chapter One provides a broad introduction of the research, discussing the importance of achieving morphology and size control over nanostructures, polymerisation techniques, self-assembly methods, and surface modification approaches. …
Page 1 of 4