Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 33 for “"polymer waveguide"”.

  1. Polymer waveguide micro-resonators for optical biosensors

    … in label-free biosensing devices. The use of polymeric materials for micro-resonator structures recently has been gain major interest multi disciplinary research since it allows rapid and straightforward fabrication process. The aim of the work described here was to develop an optical …

    glasgow Download PDF for Polymer waveguide micro-resonators for optical biosensors (opens in a new tab)

  2. POLYMER WAVEGUIDE MANUFACTURING AND PRINTED CIRCUIT BOARD INTEGRATION

    … some of the optical applications in products. Polymer waveguides offer the promise to act as an enabling technology to provide highly complex optical routing that can be passively connected, lowering system costs and allowing next generation systems to be optically driven. For this to become a …

    mtu Repository record for POLYMER WAVEGUIDE MANUFACTURING AND PRINTED CIRCUIT BOARD INTEGRATION (opens in a new tab)

  3. A POLYMER WAVEGUIDE PLATFORM FOR HYBRID INTEGRATED PHOTONICS AND PHOTONIC SIMULATION

    … In this thesis, we develop a strain-tunable polymer waveguide platform, demonstrate the encapsulation of two-dimensional materials in different parts of the photonic mode, and explore the photonic simulation of topological defects in a 1D lattice model. The developed viscoelastic, single-mode …

    nus Repository record for A POLYMER WAVEGUIDE PLATFORM FOR HYBRID INTEGRATED PHOTONICS AND PHOTONIC SIMULATION (opens in a new tab) Download file for A POLYMER WAVEGUIDE PLATFORM FOR HYBRID INTEGRATED PHOTONICS AND PHOTONIC SIMULATION (opens in a new tab)

  4. ELECTRO-OPTIC CONTACT POLING OF POLYMER WAVEGUIDE DEVICES AND THIN FILMS

    … modulation frequencies up to 100 GHz and faster. Polymer modulators are used over lithium niobate due to the large potential electro-optic coefficient, which has been shown to be as high as 226 pm/V in thin films. Organic electro-optic polymers used in thin film modulators contain nonlinear …

    mtu Repository record for ELECTRO-OPTIC CONTACT POLING OF POLYMER WAVEGUIDE DEVICES AND THIN FILMS (opens in a new tab)

  5. Optical-based spectroscopic methods for measuring chemical, optical, and physical properties of thin polymer waveguide films

    … “real world” devices that consist of thin polymer waveguide films. Many applications (e.g., sensors, microelectronics, optics, and biomedical applications, etc.) utilize thin polymer waveguide films, and non-destructive characterization methods based on Fourier transform (FT)-plasmon …

    iastate Repository record for Optical-based spectroscopic methods for measuring chemical, optical, and physical properties of thin polymer waveguide films (opens in a new tab)

  6. Investigation of polymer waveguides for fully embedded board-level optoelectronic interconnects

    … optoelectronic interconnect structure utilizing polymer waveguides and 45-degree micro mirror light couplers. This structure is expected to provide high-speed, large bandwidth, low power dissipation, as well as compatibility to conventional PCB fabrication process, ease of optical alignment and …

    texas Repository record for Investigation of polymer waveguides for fully embedded board-level optoelectronic interconnects (opens in a new tab)

  7. Thin Film Lasers Integrated with Planar Waveguides

    … (EEL) whose optical output is coupled into a polymer waveguide integrated onto the same electrical interconnection substrate. This embedded laser/waveguide structure is a fundamental building block toward the realization of planar lightwave circuits using embedded optical interconnections. The …

    gatech Repository record for Thin Film Lasers Integrated with Planar Waveguides (opens in a new tab)

  8. Development of microfabricated optical chemical sensor platforms using polymer processing technology

    … describes the design and fabrication of enhanced polymer waveguide platforms for absorption-based optical chemical sensors and the use of soft lithographic techniques for the fabrication of optical sensor chips. The design of the enhanced polymer waveguide platforms was based on a previously …

    dcu Download PDF for Development of microfabricated optical chemical sensor platforms using polymer processing technology (opens in a new tab)

  9. MULTI-MODE AND SINGLE MODE POLYMER WAVEGUIDES AND STRUCTURES FOR SHORT-HAUL OPTICAL INTERCONNECTS

    Single mode and multi-mode polymer optical waveguides are a viable solution for replacing copper interconnects as high speed and large bandwidth short-haul optical interconnects in next-generation supercomputers and data servers. A precision laser direct writing method is implemented for producing …

    mtu Repository record for MULTI-MODE AND SINGLE MODE POLYMER WAVEGUIDES AND STRUCTURES FOR SHORT-HAUL OPTICAL INTERCONNECTS (opens in a new tab)

  10. Investigation of optical loss changes in siloxane polymer waveguides during thermal curing and aging

    … off-chip metal interconnects. In such systems, polymer optical waveguides are being considered to replace electrical interconnects because of their high capacity for bandwidth and less constraints on interconnect length. The optical loss in the polymer optical waveguides is the key criterion …

    gatech Repository record for Investigation of optical loss changes in siloxane polymer waveguides during thermal curing and aging (opens in a new tab)

  11. Fabrication and light management of microscale solar cells

    … layer. Combined with a backside-reflector and a polymer waveguide, these ribbon-like miniature semiconductor membranes demonstrate performance merits that are comparable to commercial silicon solar cells, albeit with significantly less active material consumption. The inherent low optical …

    uiuc Repository record for Fabrication and light management of microscale solar cells (opens in a new tab)

  12. High efficiency optical coupling to and from silicon photonic integrated circuits

    … Photonic wire bonding consists of 3D printing a polymer waveguide between two photonic components using two photon polymerization. I show that it is possible to successfully use photonic wire bonds in cryogenic environments by a careful selection of materials and the appropriate techniques for …

    ubc Repository record for High efficiency optical coupling to and from silicon photonic integrated circuits (opens in a new tab) Download PDF for High efficiency optical coupling to and from silicon photonic integrated circuits (opens in a new tab)

  13. Quantitative linear optical scattering spectroscopy of two-dimensionally textured planar waveguides

    … and defect superlattice texturing of 2D planar waveguides. By achieving unprecedented agreement between experimentally measured and rigorously simulated band structures of leaky modes associated with the second, and up to the seventh, zone-folded Brillouin zones of square and triangular lattice …

    ubc Repository record for Quantitative linear optical scattering spectroscopy of two-dimensionally textured planar waveguides (opens in a new tab) Download PDF for Quantitative linear optical scattering spectroscopy of two-dimensionally textured planar waveguides (opens in a new tab)

  14. High quality optical and optoelectronic materials for efficient light management and solar spectrum control and conversion

    … emissive component, quantum dots embedded in a polymer waveguide. The quantum dots used here have high quantum yields and narrow bandwidths, which are necessary if an RGB display is to be realized. Additionally, the Stokes shift of the quantum dots is large, which reduces reabsorption events …

    uiuc Repository record for High quality optical and optoelectronic materials for efficient light management and solar spectrum control and conversion (opens in a new tab)

  15. Conditional artificial dielectric waveguide

    … ( the guest material ) is sandwiched between two polymeric films ( the host material ) to form an artificial dielectric waveguide. An artificial dielectric is a composite material consisting of a dielectric with a large number of conducting particles arranged in a three-dimensional pattern. The …

    njit Repository record for Conditional artificial dielectric waveguide (opens in a new tab)

  16. Integration of thin film GaAs MSM photodetector in fully embedded board-level optoelectronic interconnects

    … photodetector as optical receiver and flexible polymer waveguide as optical transmitting media. Thin film MSM photodetector array is fabricated and integrated with channel waveguide array. The whole system integration among thin film array of photodetector and VCSEL and thin film flexible …

    texas Repository record for Integration of thin film GaAs MSM photodetector in fully embedded board-level optoelectronic interconnects (opens in a new tab)

  17. Design, Fabrication and Characterisation of Laser Micromachined Devices in Electro-Optic Polymer Thin Films

    … integrated optical devices into electro-optic polymer thin films. While Mach-Zehnder modulators and ring resonator type of devices in electro-optic polymers are well explored, in this research the attempt was made to demon- strate an electro-optic tunable Bragg grating in a chromophore doped …

    auckland-ms Repository record for Design, Fabrication and Characterisation of Laser Micromachined Devices in Electro-Optic Polymer Thin Films (opens in a new tab)

  18. LOW-LOSS, HIGH PERFORMANCE HYBRID PHOTONICS DEVICES ENABLED BY ION-EXCHANGED GLASS WAVEGUIDES

    Robust ion-exchanged glass waveguides exhibit low optical losses in a broad spectral range and they allow integration of several devices on the same chip due to their planar structure. Consequently, they can be a low cost alternative to semiconductors for fabricating various integrated optical …

    arizona-thes Repository record for LOW-LOSS, HIGH PERFORMANCE HYBRID PHOTONICS DEVICES ENABLED BY ION-EXCHANGED GLASS WAVEGUIDES (opens in a new tab)

  19. Design, Fabrication and Characterization of a Polymer Electro-Optic Modulator

    … designed and fabricated an Electro-optic (EO) polymer Mach-Zehnder modulator for the use at the 1550nm telecommunication wavelength. Structures in polymer are patterned with μm-resolution by laser ablation – a method that hasn’t been widely used in single-mode polymer waveguide production. The …

    auckland-ms Repository record for Design, Fabrication and Characterization of a Polymer Electro-Optic Modulator (opens in a new tab)

  20. NONLINEAR OPTICAL WAVES IN CATIONIC POLYMERIZATION SYSTEMS: FACILE ROUTES TO 3-D POLYMER AND METALLODIELECTRIC FUNCTIONAL MICROSTRUCTURES

    … on the strength of the applied field. Cationic polymerization induced refractive index change (Δn) (nonlinear response of material’s property) in epoxide systems was exploited to elicit modulation instability (MI) and self-trapping (optical nonlinear phenomena) of incoherent light. Demonstration …

    mcmaster Repository record for NONLINEAR OPTICAL WAVES IN CATIONIC POLYMERIZATION SYSTEMS: FACILE ROUTES TO 3-D POLYMER AND METALLODIELECTRIC FUNCTIONAL MICROSTRUCTURES (opens in a new tab)

Page 1 of 2