Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 213 for “"pool boiling"”.
-
Pool boiling in electrical systems
… thesis presents the results of research into pool boiling in electrical systems, with particular application to stator end windings cooling. Pool boiling heat transfer characterisation of wire-wound motor windings geometry (MWG) surfaces was characterised, with MWG surfaces returning higher …
-
Pool boiling on nano-finned surfaces
The effect of nano-structured surfaces on pool boiling heat transfer is explored in this study. Experiments are conducted in a cubical test chamber containing fluoroinert coolant (PF5060, Manufacturer: 3M Co.) as the working fluid. Pool boiling experiments are conducted for saturation and subcooled …
-
Sub-Cooled Pool Boiling Enhancement with Nanofluids
… used in many engineering thermal designs. Boiling is an important phase change phenomena as it is a common heat transfer process in many thermal systems. Phase change processes are critical to thermodynamic cycles as most closed loop systems have an evaporator, in which the phase change …
-
Nucleate pool boiling characteristics of R-124
This thesis examines the pool boiling heat transfer characteristics of HCFC-124 and HCFC-124/oil mixtures with up to 10% (by weight) miscible alkylbenzene oil. One smooth and 4 enhanced tubes were tested: a 19 and 26 low integral-fin tube (GEWA-K); a modified finned tube (TURBO-B); and a porous …
-
Nucleate pool boiling in an accelerating system.
… designed and constructed to investigate nucleate pool boiling of water from a mirror finished copper surface. The system was constructed to withstand acceleration force levels up to 1800 g's and to operate at heat fluxes to 200,000 BTU/hr-ft2. No nucleate boiling data was taken due to minor …
-
Pool Boiling from Enhanced Structures under Confinement
A study of pool boiling of a dielectric liquid (PF 5060) from single-layered enhanced structures was conducted. The parameters investigated were the heat flux, the width of the microchannels and the microchannel pitch. The boiling performance of the enhanced structures increases with increase in …
-
Molecular dynamic simulation of pool boiling process
… presents molecular dynamic simulation of the pool boiling process of water molecules with heater modelled as lattice of copper atoms. Heat transfer coefficient was calculated, and the results were compared to existing correlations for pool boiling heat transfer. The purpose of the analysis was …
-
Nucleate pool boiling of nitrogen from artificial cavities
Pool boiling heat transfer of nitrogen from artifical cavities was investigated. Boiling was from circular, one inch diameter horizontal mirror finished copper plates. The single artifical cavity surfaces investigate were: a drilled 0.0043 inch diameter hole, a drilled 0.015 inch diameter hole, and …
-
Pool boiling and spray cooling with FC-72
Doctor of Philosophy (Ph.D.)
-
Effect of peripheral wall conduction in pool boiling
Abstract not available.
-
Enhancement of Cryogenic Pool Boiling Through Surface Modifications
… air. Experiments were conducted to examine the pool boiling behavior of liquid nitrogen as a liquid-oxygen simulant. Cylindrical test specimens with different geometries and surface configurations (grooves) were heated by embedded electrical cartridge heaters. Multiple embedded thermocouple …
-
ENHANCED POOL BOILING PERFORMANCE WITH ENGINEERED STRUCTURES AND MACROCONVECTION
… need for better heat transfer techniques. Pool boiling heat transfer has great potential as it can provide high heat transfer capacity during the phase change of the working fluid. In this thesis, the two-phase heat transfer performance of the heat sinks has been enhanced and experimentally …
-
Influence of surface characteristics on pool boiling heat transfer
Pool boiling is a promising solution for meeting the heat dissipation requirements in high-heat-flux applications such as supercomputers, nuclear reactors, and laser generators. Surface characteristics greatly influence boiling heat transfer, which makes it crucial to understand their impact for …
-
Nucleate Pool Boiling of Surface-Modified Nano-Porous Alumina
In nucleate pool boiling, heat transfer augment is an important issue. Among various techniques for enhancement, porous surfaces with millimeter to micron-sized diameter have been studied in the past few decades. In this study, the nano porous surface (NPS) of alumina was created to address …
-
Interaction of active sites in pool boiling heat transfer
… under natural convective and nucleate boiling conditions. A flat, polished, stainless steel plate was the heat source; and degassed, spectroscopic grade carbon tetrachloride was the heat transfer fluid. Tests were conducted at both one, and one and one-half atmospheres. Heat flux …
-
Influence of Liquid Height on Pool Boiling Heat Transfer
… Compared to other heat extraction methods, boiling provides one of the highest heat transfer coefficients. The heat extraction due to the boiling process is limited to the Critical Heat Flux (CHF). At CHF, an insulating layer of escaping bubbles forms upon the surface to prevent boiling …
Page 1 of 11