Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 31 for “"pore area"”.
-
The reliability of fingerprint pore area in personal identification
… different substrates on the reproducibility of pore dimensions in inked reference fingerprints was investigated. Photomicrographs of reference prints were taken and pore area was measured repeatedly using appropriate software. Reproducibility of pore area was also studied in latent prints. …
-
Experimental verification of transport phenomena during frying of foods
… on the properties of potato slices (surface pore characteristics, oil content, moisture loss and mechanical properties) was investigated. Scanning electron microscopy (SEM) was employed to develop surface topographic images and image pro plus software was used to determine the pore area of …
-
In vivo Longitudinal Changes in Lamina Cribrosa Microarchitecture and Optic Nerve Head Structure in Experimental Glaucoma
… monkey eyes and 3 normal human eyes. Mean ALCS pore area, elongation, and nearest neighbor distance [NND] were quantified in each imaging session and measurement repeatability was assessed. 2) Spectral domain optical coherence tomography (SDOCT) imaging was used to acquire radial B-scan images …
-
Identifying and Reducing Variability, Improving Scaffold Morphology, and Investigating Alternative Materials for the Blood Vessel Mimic Lab Electrospinning Process
… increases with scaffolds of smaller fibers and pores than the current electrospinning protocol can produce. Finally, the Tissue Engineering Lab has interest in testing devices in more tortuous BVM bioreactor designs, however the use of relatively rigid PLGA scaffolds has severely limited the …
-
Dynamic Electroporation Modelling
… of the cell membrane in terms of pore density or the fraction of the cell area that the pores occupy. Conventional biotechnology processes of electroporation make use of unipolar electric field pulses, which are known to generate undesirable conditions such as asymmetrical …
-
Characterization of Consolidated Granular Salt
… of physical properties related to the pore structure, and quantification of pore sizes areas under differing conditions. Samples for this study were obtained from mine-run granular salt from the Waste Isolation Pilot Plant (WIPP) and Avery Island which were consolidated hydrostatically …
-
Modification of track-etched membrane structure and performance via uniaxial stretching
… and to predict changes in the characteristics of pore entrances, such as major and minor axis, aspect ratio, and pore area, from known membrane properties and stretching conditions. Pore size characteristics (distribution of lengths of the major and minor axes and aspect ratio) impact membrane …
-
The Microstructure and Physical Properties of Plant-Based Waxes and their Relationship to the Oil Binding Capacity of Wax Oleogels
… fractal dimension of a network decreases as its pore area fraction increases, correlating to more oil loss. Thus, these two parameters can be modified to tailor the oil binding capacity of oleogels. Under static cooling, CLX and SFX exhibited the greatest oil binding capacity. Shear during …
-
In Vivo Examination of Lamina Cribrosa Microarchitecture and Optic Nerve Head Geometry in Normal Human Aging and Early Glaucoma
… used to quantify Bruch’s Membrane Opening (BMO) area, mean anterior lamina cribrosa surface depth (ALCSD), mean minimum rim width (MRW) and scaled MRW in young normal subjects to examine ONH structure in eyes with different axial lengths. (2) The aforementioned and additional SDOCT parameters …
-
Characterization of Reservoir Quality in the Frio Formation: Implications for Onshore Geological CO2 Storage along the Texas Gulf Coast
… Digital Image Analysis (9.3 plus or minus 5.3% pore area), Density Porosity (10.2 plus or minus 9.7% porosity) and Routine Core Analysis (20.1 plus or minus 4.3% porosity) methods. The porosity measures were significant in determining the similarities between the sand-dominated and mud-dominated …
-
Pulsed CO₂₊ laser welding of inconel 718
… width, bottom weld bead width, cross-sectional area, percentage pore area, pore diameter, and pore spacing were measured. The number of microfissures per weld (cross-section) was quantified and the total microfissure length per weld (cross-section) was measured.</p> <p>The HAZ was found not to …
-
Examining In Vivo Changes in Lamina Cribrosa in Non-human Primates with Experimental Glaucoma
… automated method to segment the lamina cribrosa pores using level sets. Our 3D transformation method provides a better representation of the ALCS from in vivo images. Following 3D transformation, mean pore area increased by 5.1 ± 2.0% in 11 normal eyes and 16.2 ± 5.9% in 4 glaucomatous eyes due …
-
Tuning capillary evaporation in nanoporous membranes: fundamentals and applications
… transfer. First of all, the effect of nanopore surface charge on evaporation area and evaporation flux per pore area is investigated numerically. Our results show that the evaporation flux increases as the nanopore surface charge density increases, being 81.1% higher when the surface charge …
-
Microstructural Engineering of Porous Cathodes for SOFC Applications
… imaging. Later, a quantitative analysis of the pore size, shape, area and distribution was completed on the same samples through a computational image analysis program called Image J (National Institute of Health, NIH). Electrochemical testing of the foamed cathode under different processing …
-
Differentiating apple sports by pollen ultrastructure : a thesis presented in partial fulfilment of the requirements for the degree of Master of Horticultural Science at Massey University
… data from the pollen grain dimensions and pore characteristics, and a Fast Fourier transform extracted quantitative data from the ridge patterns. Statistical methods were applied to the data to differentiate the sports. Pollen harvested from apple flowers in the spring were wider than …
-
The effect of uni-axial stretching on microporous phase separation membrane structure and performance
… stretching. Material properties such as pore aspect ratio, pore area, porosity, membrane thickness, surface properties, and polymer phase transition temperatures were measured as a function of membrane strain. Membrane performance was characterized in terms of pure water flux through the …
-
Effects of coal composition and fabric on porosity, sorption capacity and gas flow properties in Western Canada Sedimentary Basin coals
… diameter of helium allows it to access coal pores which are inaccessible to mercury at test pressures. Greater vitrinite content is generally correlated with higher coal total pore area due to the abundant microporosity in vitrinite. Coal methane sorption capacity is up to 23.5 cc/g on a …
-
Response of Benthic Foraminifera to Ocean Acidification and Impact on Florida's Carbonate Sediment Production
… 7.6) by 50% (p < 0.01, r2 = 36%), increasing its pore area (F(2,3477) = 103.37, p West Florida shelf LBF carbonate production attributed to LBF was estimated by combining interpolations of SS calcite at three treatment levels, corresponding to pH 8.1 (400 ppm CO2), pH 7.8 (800 ppm CO2), and pH 7.6 …
-
A comparison of intracortical porosity along the length of the human clavicle in an elderly Scottish sample
… the result of an increase in the percentage of pores occupying cortical bone, known as intracortical porosity, and can be affected by factors such as age, sex, biomechanics, and pathology. The aim of this research is to compare intracortical porosity along the length of the clavicle in an …
-
CHARACTERIZING THE PRODUCTIVE LIMIT OF THE NORTHEAST PENNSYLVANIA MARCELLUS DRY GAS WINDOW: AN INVESTIGATION OF LOW RESISTIVITY ALONG THE LINE OF DEATH
… and nitrogen adsorption to evaluate OM hosted pore size distributions and measure capacity to hold gas. Regarding the low resistivity to the south of the LOD, the STEM and EDS discovered silver dispersed throughout the OM in both porous and non-porous samples south of the LOD, while the OM …
Page 1 of 2