Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 18 of 18 for “"positional control"”.
-
Comparison of robotic positional control strategies
A comparison of robotic positional control strategies was done using computer simulation on a three degree-of-freedom manipulator. The manipulator was subjected to different payloads, trajectories at different velocities, varying different controller sample rates and different motor saturation …
-
Positional control strategies for a modular, long-reach, truss-type manipulator
… could act as a shielded conduit for control and power cabling. Kinematic analysis algorithms tailored to address the peculiarities of this new manipulator system have also been developed. In this work, the kinematic redundancy of the system is exploited to provide alternative …
-
Uma metodologia para controle e compensação posicional automática de um arranjo submarino
This dissertation proposes a methodology for the positional control of an underwater array that can be used for any other submerged objects that one wishes to control. The study was performed with only one degree of freedom and could be extended to other grades with a consequent increase in …
-
Scanning tunneling microscopy investigation of atomically precise graphene nanoribbons
… with computational modeling. The hypothesis that positional control over graphene nanoribbon synthesis could be achieved by tip-induced polymerization was explored. While the thermal self-assembly of 10,10′-dibromo-9,9′-bianthracene (DBBA) into N=7 armchair GNRs was previously demonstrated, the …
-
Optimal Electro-Hydraulic Control of Mining Booms
… The present tunnelling machines are open-loop controlled; better positional control can be obtained by introducing feedback, and a microprocessor-based system provides automatic operation. A dual microprocessor system based on the 8085A 8-bit microprocessor has been built and tested on a boom …
-
Development of the ACT hand with a broad and precisely adjustable stiffness spectrum via series elastic actuators
… including low inertia and improved force control. The Anatomically Correct Testbed (ACT) robotic hand is one such system, developed to understand the intrinsic biomechanical and control features of human hands. However, this system has limited compliance, and controlling it is challenging …
-
Microfluidic flow of colloidal particles in nematic liquid crystals
… lines around a static colloidal partical, novel positional control of individual colloidal particle and also colloidal densities in microchannels through tunable driving pressure, and non monotonic dependence of the differential velocity of particle and fluid in highly confined ducts on Ericksen …
-
Design and evaluation of a high-power voltage-variable reactance
… reactance for use in the frequency-control loop of an oscillating superconducting cavity-resonator system at Oak Ridge National Laboratory. The reactance device was to be a totally electronic system capable of handling roughly 100 vars of reactive power at 136 MHz to compensate for …
-
Force spectroscopy with DNA origami
… any geometry with nanometer precision. This positional control offers the possibility to investigate biomolecular systems at unequaled levels of control. In this cumulative dissertation, I present the following three DNA origami centered research projects: In the first part, I present the …
-
Simplified Vector-Directed Control Of A Tiltrotator Equipped Excavator
… the number and complexity of the operator’s controls. This thesis applies principles of robotics to a tiltrotator-equipped excavator, allowing the operator to directly control the velocity vectors describing the excavator bucket position and orientation instead of controlling them indirectly …
-
Design and analysis of an end-of-arm robotic drilling tool for aerospace manufacturing with active vibration control
… robot (cobot) compatibility, precise positional control, and advanced vibration suppression capabilities. ACME utilizes mechanisms for efficient planar movement, combined with a passive self-normalizing drilling head capable of maintaining normality on complex, double-curvature …
-
Development and Test of an Automatic Mass Balancing System for Cal Poly's Spacecraft Attitude Dynamics Simulator
… iterations of the SADS, providing real-time positional control of the masses and a customizable center of mass envelope. An STM32-based onboard computer was developed that implements control laws, balancing algorithms, and attitude estimation using a combination of Simulink code generation …
-
FORCE CONTROL OF ROBOT MANIPULATORS
… to promote the greater use of robots, a force control manipulator has been developed in this project. The design and implementation of a force control robot is presented in this thesis. The system consists of a microcomputer, a force sensing wrist and the PUMA 560 robotic manipulator. The …
-
Sensing and Actuation Technologies for Dexterous Manipulation in Constrained Environments
… robots with sufficiently robust perception and control systems. In all but the most structured and unconstrained environments, roboticists must make compromises in designing these systems due to an artificially limited set of available sensing and actuation modalities. Since most environments …
-
Minimization of Crosstalk in Multi-Actuator Hydraulic Systems
… material testing is dominated by servo-hydraulic control systems owing to their large power to weight ratio compared to servo-electric control systems. Hydraulic systems are capable of producing large forces and torques with a fast response time, making them ideal to conduct fatigue, failure, and …
-
The application of robotics to the turbine blade encapsulation process
… robot has been designed together with a computer controlled encapsulation die. The robot has been designed as a mechanical handling robot of cylindrical geometry, suitable for use in a circular work cell. It is the prototype for a production model to be called `The Cybermate'. The prototype robot …
-
Designing Plasmonic Meta-Surfaces via Template-Assisted 1D, 2D, and 3D Colloidal Assembly
… nanoparticles with precise orientational and/or positional control. In the course of this work, the level of particle assembly complexity is successively increased to realize 1-, 2-, and 3-dimensional (1D, 2D, 3D) plasmonic assemblies. Strongly correlated with assembly geometry, different aspects …