Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 7 of 7 for “"post-etch residues"”.

  1. Investigation Of Metal-Selective Passivation Coatings and Deep Eutectic Solvents to Mitigate Cu-Al Galvanic Corrosion and Post-Etch Residues in Advanced Integrated Circuit Manufacturing

    … consistent with a direct chemical etching mechanism. Although the current industrial mitigation strategy employs a micron-thin palladium (Pd) metal overlay as a protective layer to prevent Cu exposure to corrosive ions, copper-exposed regions were still observed, resulting in …

    unt Repository record for Investigation Of Metal-Selective Passivation Coatings and Deep Eutectic Solvents to Mitigate Cu-Al Galvanic Corrosion and Post-Etch Residues in Advanced Integrated Circuit Manufacturing (opens in a new tab)

  2. Charakterisierung der Ätzrückstände nach dem Plasmaätzverfahren in der Aluminium-Strukturierung

    … of this thesis is the characterization of post etch residues after a metal etch process with Cl2/BCl3 plasma etch gases. Plasma etching processes are important for the fabrication of integrated circuits because these processes have a great impact on the size and the quality of the …

    cau-kiel Repository record for Charakterisierung der Ätzrückstände nach dem Plasmaätzverfahren in der Aluminium-Strukturierung (opens in a new tab)

  3. Post Plasma Etch Residue Removal Using Carbon Dioxide Based Fluids

    … current methods for photoresist and post plasma etch residue removal face several challenges. A cleaning process should be environmentally benign, compatible with dielectric materials and copper, and provide residue removal from narrow and high aspect ratio features. In this work, …

    gatech Repository record for Post Plasma Etch Residue Removal Using Carbon Dioxide Based Fluids (opens in a new tab)

  4. USE OF DILUTE HYDROFLUORIC ACID AND DEEP EUTECTIC SOLVENT SYSTEMS FOR BACK END OF LINE CLEANING IN INTEGRATED CIRCUIT FABRICATION

    … end of line processing. This is done by plasma etching of low-k dielectric layers to form vias and trenches, and this process typically leaves behind polymer-like post etch residues (PER) containing copper oxides, copper fluorides and fluoro carbons, on underlying copper and sidewalls of low-k …

    arizona-thes Repository record for USE OF DILUTE HYDROFLUORIC ACID AND DEEP EUTECTIC SOLVENT SYSTEMS FOR BACK END OF LINE CLEANING IN INTEGRATED CIRCUIT FABRICATION (opens in a new tab)

  5. Use of Formulations Based On Choline Chloride-Malonic Acid Deep Eutectic Solvent for Back End of Line Cleaning in Integrated Circuit Fabrication

    … in semiconductor manufacturing involve dry etching of a low-k material and deposition of copper and metal barriers to create copper/dielectric stacks. After plasma etching steps used to form the trenches and vias in the dielectric, post etch residues (PER) that consist of organic polymer, …

    arizona-thes Repository record for Use of Formulations Based On Choline Chloride-Malonic Acid Deep Eutectic Solvent for Back End of Line Cleaning in Integrated Circuit Fabrication (opens in a new tab)

  6. Reliability and processing of ferroelectric thin film capacitors with emphasis on fatigue and etching

    … objective of this research was to identify an etching technology (process integration issue) for patterning of the ferroelectric capacitors. The etching process should provide high etch rates, good etch anisotropy, high etch selectivity and minimal post etch residues. It has been shown that a …

    vt Repository record for Reliability and processing of ferroelectric thin film capacitors with emphasis on fatigue and etching (opens in a new tab)

  7. Characterization of Post-Plasma Etch Residues and Plasma Induced Damage Evaluation on Patterned Porous Low-K Dielectrics Using MIR-IR Spectroscopy

    … mask defect formation after fluorocarbon plasma etch was characterized and investigated. Finding suggest the presence of water soluble amines that could possibly trigger the formation of TiN surface defect. An effective post etch treatment (PET) methods were applied for etch residue defect …

    unt Repository record for Characterization of Post-Plasma Etch Residues and Plasma Induced Damage Evaluation on Patterned Porous Low-K Dielectrics Using MIR-IR Spectroscopy (opens in a new tab)