Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 11 of 11 for “"powder catalyst"”.
-
Vapor-phase catalytic hydrogenation of 1-octene using nickel microwires and gauzes
… feasibility of using nickel microwire and gauze catalysts, manufactured by MEMTEC, Inc., in the vapor-phase hydrogenation of 1-octene. This reaction is representative of vapor-phase olefin hydrogenation processes commonly used in the petrochemical industry. Catalyst feasibility was determined by …
-
Development of Spherical Ni-Co/MgAlO Bimetallic Catalyst for CO2 Reforming of CH4
… gas or syn-gas. A novel Ni-Co/AlMgO bimetallic powder catalyst was developed in previous research for dry reforming of methane (DRM) process which can eliminate carbon deposition. But it is difficult242x to apply this loose-powder catalyst in industrial scale. The procedure of making spherical …
-
The Application of Tracer Molecules to the Study of Surface Processes
… of adsorbed species on several different nickel catalysts. Reactions have been carried out on alumina- and silica-supported metal catalysts at nickel concentrations of 0.1 and 5%, a nickel powder catalyst, and a nickel catalyst partially poisoned by nickel phosphide in an attempt to determine the …
-
Mixed Ionic/Electronic Conducting Ceramic Membranes for Oxygen-Assisted CO2 Reforming
… reactor doubles methane conversion with a powder Pt/ZrO2 catalyst. The deactivation of both Pt/ZrO2 and a Pt/CeZrO2 catalyst is also retarded substantially. Catalyst performance improvement is attributed to a beneficial in situ effect of the SFC membrane on catalyst oxidation state. The SFC …
-
Mechanically Alloyed Ni-Zr Powder Catalysts for the Reduction of Nitric Oxide
Mechanically alloyed NiZr powder was studied as a catalyst candidate for the reduction of nitric oxide. Mechanical alloying provides a new processing route to mix catalytically active elements on the atomic scale which do not otherwise form equilibrium solid solutions. The metastable alloyed powder …
-
Addressing the Key Challenges of Light Penetration and Charge Separation for Plasmonic Catalysis
… poor penetration of light into a typical powder catalyst bed poses a challenge for efficient high temperature photo-driven heterogenous catalysis. To address this issue, we present a 3D porous optical diffuser loaded with plasmonic Rh nanoparticles enabling volumetric illumination of the …
-
Elucidation of the Catalytic Partial Oxidation of Methane Utilizing the One-of-a-Kind Catalytic Shock Tube Technique
… methane and oxygen in the presence of platinum catalysts were reacted in a single-pulse shock tube by 27-52 psi shock waves at temperatures ranging between 850-1600 K for reaction times of 2.1-6.4 ms. For each reaction condition, using both fixed and powder catalyst, the products, reactants, and …
-
Control of pore structures and activity of PGM-alumina exhaust catalysts
… but smaller pore sizes than commercial alumina powder, which is being used in the automotive exhaust catalyst industry. Sintering studies indicated that ceria (11 weight per cent) only stabilised the control samples to a certain degree, but it had no effect on fatty acid-derived alumina samples. …
-
Porous titanium dioxide nanomaterials for photocatalytic and photovoltaic applications
… removed via acidification, resulting in titania powders with a surface area ranging from 197 to 239 m2/g. The templated TiO2 with a surface area of 239 m2/g and pore diameters of 6-109 nm showed a promising 27% photocatalytic improvement compared to commercial particles, and a 180% increase …
-
Monitoring of the degradation of chlorinated organic impurities in water by automated flow injection analysis
… lamps and used either suspended titanium dioxide powder (anatase) or titania glass as photocatalyst. The two UV lamps were directly immersed in the solution to provide the most efficient UV irradiation. A 23 kHz sonicator probe was situated in the centre of the vessel for those experiments which …
-
Structure-Sensitivity of CO Oxidation Over Supported Pt Catalysts in the Subnanometer Regime and Its Origin
Metal-oxide-supported Pt-group metal catalysts are regularly used in many industrially relevant reactions, including CO oxidation for automotive emission control. Being able to activate O2, these catalysts are also promising candidates for oxidative decomposition of chemical warfare agents and …