Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 85 for “"power added efficiency"”.

  1. A 9dB Back-off GaN Doherty Amplifier

    … the design and implementation of a Doherty power amplifier operated in the Sub-7 GHz band for the purpose of improving backed off power added efficiency when compared to a single-transistor power amplifier design. The Doherty power amplifier utilizes a Wilkinson divider for an uneven input …

    carleton Repository record for A 9dB Back-off GaN Doherty Amplifier (opens in a new tab)

  2. Multidimensional power amplifier circuit optimizations for adaptive radar.

    … to dynamically reconfigure radar transmitter power amplifiers will become necessary for adaptive radar. Reconfigurable transmitters will require the ability to tune input parameters such as load impedance, waveform bandwidth, and amplifier bias voltage to provide excellent performance while …

    baylor Repository record for Multidimensional power amplifier circuit optimizations for adaptive radar. (opens in a new tab)

  3. Novel design & implementation of a broadband and highly efficient doherty power amplifier

    The conventional Doherty power amplifier suffers from some disadvantages such as narrow bandwidth and large size due to its critical use of passive transmission lines as impedance inverters. In this work, a novel configuration is proposed, which promises to eliminate the above mentioned problems by …

    nus Repository record for Novel design & implementation of a broadband and highly efficient doherty power amplifier (opens in a new tab) Download file for Novel design & implementation of a broadband and highly efficient doherty power amplifier (opens in a new tab)

  4. A Self-Calibrated Power Detector and Current Sensor for Use in a Power Amplifier Control Circuit

    The power amplifier in a transmitter, especially high-power transmitters, generally uses more power than any other component in the signal chain. As a result, large power savings can be achieved if the efficiency of the power amplifier is optimized. Additionally, power amplifiers in high-power …

    tamu Repository record for A Self-Calibrated Power Detector and Current Sensor for Use in a Power Amplifier Control Circuit (opens in a new tab)

  5. RF Circuit Designs for Reliability and Process Variability Resilience

    … RF circuits offer high mobility and wide-band efficiency, while CMOS technology provides the advantage of low cost and high integration capability. At the same time, CMOS device size continues to scale to the nanometer regime. Reliability issues with RF circuits have become more challenging …

    ucf Repository record for RF Circuit Designs for Reliability and Process Variability Resilience (opens in a new tab)

  6. Design and integration of hybrid and monolithic microwave power amplifiers for wideband applications using gallium nitride technology

    … methods of realizing broadband microwave power amplifiers (PAs) up to 40 GHz with high efficiency using gallium nitride (GaN) technology. The studied architectures are based on the reactive/resistive matching approach and the traveling wave technique in both hybrid and monolithic microwave …

    gatech Repository record for Design and integration of hybrid and monolithic microwave power amplifiers for wideband applications using gallium nitride technology (opens in a new tab)

  7. Efficiency Enhancement of Base Station Power Amplifiers Using Doherty Technique

    The power amplifiers are typically the most power-consuming block in wireless communication systems. Spectrum is expensive, and newer technologies demand transmission of maximum amount of data with minimum spectrum usage. This requires sophisticated modulation techniques, leading to wide, dynamic …

    vt Repository record for Efficiency Enhancement of Base Station Power Amplifiers Using Doherty Technique (opens in a new tab)

  8. Design of a Two Stage Ku-Band Power Amplifier Based on GaN-HEMT Technology

    … thesis investigates the possibility to design a power amplifier at Ku-band using hybrid design technology. The investigation is based on design, simulation and measurement of a two stage hybrid power amplifier. The device technology used throughout the project is 0.25 um GaN-HEMT obtained from …

    chalmers Repository record for Design of a Two Stage Ku-Band Power Amplifier Based on GaN-HEMT Technology (opens in a new tab)

  9. Silicon-Based PALNA Transmit/Receive Circuits for Integrated Millimeter Wave Phased Arrays

    … in meeting system performance and size/weight/power (SWAP) requirements. This work demonstrates a loss-aware methodology for analysis and design of switchless transmit/receive (T/R) circuits. The methodology provides design insights and a practical, generally applicable approach for solving the …

    vt Repository record for Silicon-Based PALNA Transmit/Receive Circuits for Integrated Millimeter Wave Phased Arrays (opens in a new tab)

  10. A Novel Integrated Doherty Power Amplifier at 28GHz

    … proposes a novel implementation of a Doherty power amplifier as a means to improve backed off power added efficiency when compared to a class B PA. The proposed Doherty output combiner boasts a 28.5% fractional bandwidth at a center frequency of 28GHz. The proposed Doherty amplifier was laid …

    carleton Repository record for A Novel Integrated Doherty Power Amplifier at 28GHz (opens in a new tab)

  11. Energy efficient radio frequency system design for mobile WiMax applications. Modelling, optimisation and measurement of radio frequency power amplifier covering WiMax bandwidth based on the combination of class AB, class B, and C operations.

    … technology accounts for 3% and 2% of the global power consumption and CO2 emissions respectively. This alarming figure is on an upward trend, as future telecommunications systems and handsets will become even more power hungry since new services with higher bandwidth requirements emerge as part …

    bradford Repository record for Energy efficient radio frequency system design for mobile WiMax applications. Modelling, optimisation and measurement of radio frequency power amplifier covering WiMax bandwidth based on the combination of class AB, class B, and C operations. (opens in a new tab)

  12. Adaptive load impedance optimization for power amplifiers in reconfigurable radar transmitters.

    … radar transmitter design between linearity and efficiency due to the signal amplification. These transmitters are driven into saturation in order to increase efficiency, but may potentially violate regulatory spectral mask limitations. An adaptive method for optimizing linearity and efficiency …

    baylor Repository record for Adaptive load impedance optimization for power amplifiers in reconfigurable radar transmitters. (opens in a new tab)

  13. A nonlinear statistical MESFET model using low order statistics of equivalent circuit model parameter sets

    … with measured results. A single stage GaAs power amplifier tuned at 13.5 GHz is simulated with the model and accurately predicts output power, input return loss, and power added efficiency. Not only is nominal performance good, but the spreads of amplifier performance seen over many wafers …

    vt Repository record for A nonlinear statistical MESFET model using low order statistics of equivalent circuit model parameter sets (opens in a new tab)

  14. Design and analysis of class AB RF power amplifier for wireless communication applications

    The Power Amplifier is the most power-consulting block among the building blocks of RF transceivers. It is still a difficult problem to design power amplifiers, especially for linear, low voltage operation. Until now power amplifiers for wireless applications is being produced almost in GaAs …

    ucf Repository record for Design and analysis of class AB RF power amplifier for wireless communication applications (opens in a new tab)

  15. Photoswitch-based Class E microwave power amplifer

    Currently radar systems have problems with power losses and efficiency, so more power is used and more heat removal is needed. The primary source of loss is the final amplifier in the transmission-receive (TR) module. The purpose of this project was to investigate the use of a novel Class E …

    missouri Repository record for Photoswitch-based Class E microwave power amplifer (opens in a new tab)

  16. Class-e Cascode Power Amplifier Analysis And Design For Long Term Reliability

    This study investigated the Class-E power amplifier operating at 5.2 GHz. Since the operation of this amplifier applies a lot of stress on the switching transistor, a cascode topology was applied in order to reduce the drain-source voltage stress. Such an amplifier was designed and optimized in …

    ucf Repository record for Class-e Cascode Power Amplifier Analysis And Design For Long Term Reliability (opens in a new tab)

  17. High Linearity 5.8 Ghz Power Amplifier With An Internal Linearizer

    A 5.8 GHz RF Power Amplifier (PA) is designed and fabricated in this work, which has very high linearity through a built-in linearizer. The PA is designed, post-layout simulated by Agilent Advanced Design System (ADS) software and fabricated by Win-Semiconductors 0.15µm pHEMT process technology. …

    ucf Repository record for High Linearity 5.8 Ghz Power Amplifier With An Internal Linearizer (opens in a new tab)

  18. Negative Conductance Load Modulation RF Power Amplifier

    … schemes have caused very poor efficiencies in power amplifiers for wireless transmission systems due to high peak-to-average power ratios (PAPR). This thesis first presents the issue with classical power amplifiers in modern modulation systems. A brief overview of current attempts to mitigate …

    calpoly Repository record for Negative Conductance Load Modulation RF Power Amplifier (opens in a new tab)

  19. Advanced Dielectrics For Gallium Nitride Power Electronics

    … by it. Metrics such as breakdown voltage, efficiency, and high-frequency dispersion are all greatly affected by the type of passivation applied. In this work the application of LPCVD Al x Siy Nz films as AlGaN/GaN HEMT passivants is presented and shown to yield superior devices to ones …

    cornell Repository record for Advanced Dielectrics For Gallium Nitride Power Electronics (opens in a new tab)

  20. A High Efficiency and Wideband Doherty Power Amplifier for 5G

    … mobile networks need high data rates and low power consumption. For this purpose, novel wideband and energy efficient power amplifiers should be designed. This thesis is concerned with this problem. Doherty Power Amplifiers (DPAs) are popular architectures for obtaining high average efficiency …

    chalmers Repository record for A High Efficiency and Wideband Doherty Power Amplifier for 5G (opens in a new tab)

Page 1 of 5