Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 56 for “"power conversion system"”.

  1. Spectrum characterization of AC/AC power conversion system

    This thesis proposes an analytical method based on three-dimensional Fourier integral to obtain accurate spectra of both the switching functions and the synthesized output voltages and input currents of matrix converter. The principle of this analytical is carried out in two steps. The first step …

    msu Repository record for Spectrum characterization of AC/AC power conversion system (opens in a new tab)

  2. Wireless high power conversion system for hybrid wind turbines

    … boundary before connection to the stationary powertrain. Conventional slip rings can provide this function but retain sliding contact wear, contamination, inspection and brush-replacement requirements. This thesis investigates a contactless alternative based on a rotary transformer (RT) …

    strathclyde Repository record for Wireless high power conversion system for hybrid wind turbines (opens in a new tab)

  3. High Power High Frequency 3-level NPC Power Conversion System

    … energy and the emerging concept of micro-grid system raises challenges to the high power conversion techniques. Multilevel converter plays the key role in such applications and is studied in detail in the dissertation. The topologies and modulation techniques for multilevel converter are …

    vt Repository record for High Power High Frequency 3-level NPC Power Conversion System (opens in a new tab)

  4. Risk Analysis of a BWR Power Conversion System; Clinton Power Station

    Made available in DSpace on 2017-07-06T18:55:11Z (GMT). No. of bitstreams: 2 Lundell_Karen_P_MS.pdf: 75358767 bytes, checksum: 79c39df654f620a010b8065f8d7ae04b (MD5) license.txt: 4813 bytes, checksum: 715c4321821a960fa1a1e91d2ac7ebce (MD5) Previous issue date: 1983

    uiuc Repository record for Risk Analysis of a BWR Power Conversion System; Clinton Power Station (opens in a new tab)

  5. Analysis of required supporting systems for the Supercritical CO2 power conversion system

    … cycles. An additional benefit of the S-CO2 system is its universal applicability as an indirect secondary Power Conversion System (PCS) coupled to most GEN-IV concept reactors, as well as fusion reactors. The United States DOE's GNEP is now focusing on the liquid Na cooled primary as an …

    nps Repository record for Analysis of required supporting systems for the Supercritical CO2 power conversion system (opens in a new tab)

  6. Optimal Power Conversion System Architectures for Utility-Scale Solar-Plus-Storage Farms

    … added storage. However, the state-of-the-art power conversion system (PCS) architectures based on central and string inverters feature a low-voltage direct-current (DC)/alternating-current (AC) distribution with underground cables inside solar farms, inducing significant copper losses and …

    gatech Repository record for Optimal Power Conversion System Architectures for Utility-Scale Solar-Plus-Storage Farms (opens in a new tab)

  7. Inter-operable bi-directional fractional power conversion system for battery-to-battery charging applications

    … charging solution that facilitates power transfer between two 400 V or two 800 V Li-ion batteries (the two common vehicle powertrain architectures). The unit will be able to transfer power between batteries in both directions regardless of which voltage is higher (or if they are …

    texas Repository record for Inter-operable bi-directional fractional power conversion system for battery-to-battery charging applications (opens in a new tab)

  8. Design and Optimization of Matrix Core Transformer for High Power Bidirectional Isolated DC/DC Converter

    … carbide (SiC) devices with high voltage and power capability are developed and widely used in several industry applications, e.g., gird-connected photovoltaic (PV) system, data center power supply, and electrical vehicle (EV) charging station. After the concept of solid-state transformer …

    arkansas Repository record for Design and Optimization of Matrix Core Transformer for High Power Bidirectional Isolated DC/DC Converter (opens in a new tab)

  9. Novel Power Electronic Device Structures for Power Conditioning Applications

    … with an aim to reduce the overall losses in the power conversion system. The types of devices discussed and evaluated in this thesis include Silicon MOSFETs, IGBT, CIGBT and GaN HEMT devices. The performance improvement methods suggested in literature usually involve a trade-off of device …

    whiterose Download PDF for Novel Power Electronic Device Structures for Power Conditioning Applications (opens in a new tab)

  10. A low ripple bi-directional battery charger/discharger using coupled inductor

    There are two important issues about a spacecraft power conversion system: low ripple current flowing through both battery and bus, and bi-directional power flow to and from the battery. This thesis introduces a novel low ripple current bi-directional battery charge/discharge converter using …

    vt Repository record for A low ripple bi-directional battery charger/discharger using coupled inductor (opens in a new tab)

  11. DESIGN OF ELECTRICAL SYSTEM FOR BLIMP/AEROSTAT BASED HIGH ALTITUDE WIND POWER GENERATING SYSTEM

    High Altitude Wind Power (HAWP) generating system can provide clean energy at low cost and high capacity factor. This thesis proposes an electrical system for a blimp/aerostat based HAWP generating system. Two different power generation and transmission mechanisms are postulated and comparative …

    nus Repository record for DESIGN OF ELECTRICAL SYSTEM FOR BLIMP/AEROSTAT BASED HIGH ALTITUDE WIND POWER GENERATING SYSTEM (opens in a new tab) Download file for DESIGN OF ELECTRICAL SYSTEM FOR BLIMP/AEROSTAT BASED HIGH ALTITUDE WIND POWER GENERATING SYSTEM (opens in a new tab)

  12. Mutually commutated converter equipped with thyristor-based cycloconverter

    The switching losses of power conversion systems can be significantly reduced by use of the proposed mutually commutated converter topologies which equipped with IGBT-based cycloconverters and permit soft switching of all semiconductor valves in all operating points without any auxiliary valves. …

    chalmers Repository record for Mutually commutated converter equipped with thyristor-based cycloconverter (opens in a new tab)

  13. Reliability improvement of DFIG-based wind energy conversion systems by real time control

    Reliability is the probability that a system or component will satisfactorily perform its intended function under given operating conditions. The average time of satisfactory operation of a system is called the mean time between failures (MTBF) and. the higher value of MTBF indicates higher …

    msu Repository record for Reliability improvement of DFIG-based wind energy conversion systems by real time control (opens in a new tab)

  14. Pulse-width-amplitude modulation (PWAM) for reducing inverter switching loss in HEV/EV motor or generator system

    Ideally the power converters are supposed to be lossless. However in the real world there are many reasons that can cause power loss in the power converter system. Therefore minimizing the power loss and operating system at high efficiency point is an essential step towards developing optimized …

    msu Repository record for Pulse-width-amplitude modulation (PWAM) for reducing inverter switching loss in HEV/EV motor or generator system (opens in a new tab)

  15. Studies on a performance enhanced dc-hfac-ac converter system for ac motor drive

    … describes a high-frequency non-resonant link power conversion system where the input dc is converted to high frequency single-phase ac (20-50 kHz) through a high frequency inverter. Then, this is converted to variable frequency three-phase ac voltage by a hfac-ac matrix converter for driving …

    ut-knoxville Repository record for Studies on a performance enhanced dc-hfac-ac converter system for ac motor drive (opens in a new tab)

  16. Estudo numérico de um elemento intensificador de potência aplicado a uma turbina eólica de pequena escala

    … Computational Fluid Dynamics (CFD), of a wind power conversion system that consists of a horizontal axis wind turbine installed inside of a diffuser shroud with a flange at the exit periphery. The flanged diffuser shroud plays the role of a device for collecting and accelerating the approaching …

    brazil-ufrn Repository record for Estudo numérico de um elemento intensificador de potência aplicado a uma turbina eólica de pequena escala (opens in a new tab)

  17. Adaptive Control of a Step-Up Full-Bridge DC-DC Converter for Variable Low Input Voltage Applications

    … is designed to operate as a front stage of a power conversion system where the input is a variable low voltage high current source. The converter is designed to step-up the low voltage input to an acceptable level that can be inverted to a 120/240 VAC 60Hz voltage for residential power. A DSP …

    vt Repository record for Adaptive Control of a Step-Up Full-Bridge DC-DC Converter for Variable Low Input Voltage Applications (opens in a new tab)

  18. PEAK SHAVING AND LOAD TRANSIENT RESPONSE MITIGATION WITH HYBRID ALTERNATING AND DIRECT CURRENT MICROGRIDS

    … hybrid microgrid using a hybrid energy storage system (HESS) of lead-carbon batteries and a supercapacitor. Physics-based modeling and simulations informed the control strategy and predicted system dynamics under alternating current (ac) and direct current (dc) step loads prior to hardware …

    nps Repository record for PEAK SHAVING AND LOAD TRANSIENT RESPONSE MITIGATION WITH HYBRID ALTERNATING AND DIRECT CURRENT MICROGRIDS (opens in a new tab)

  19. Maximum power tracking control scheme for wind generator systems

    The purpose of this work is to develop a maximum power tracking control strategy for variable speed wind turbine systems. Modern wind turbine control systems are slow, and they depend on the design parameters of the turbine and use wind and/or rotor speed measurements as control variable inputs. …

    tamu Repository record for Maximum power tracking control scheme for wind generator systems (opens in a new tab)

Page 1 of 3