Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 11 of 11 for “"power electronics cooling"”.

  1. Modeling and optimization of a thermosiphon for passive thermal management systems

    An optimally designed thermosiphon for power electronics cooling is developed. There exists a need for augmented grid assets to facilitate power routing and decrease line losses. Power converter augmented transformers (PCATs) are critically limited thermally. Conventional active cooling system …

    gatech Repository record for Modeling and optimization of a thermosiphon for passive thermal management systems (opens in a new tab)

  2. A Two-Phase Cooling Method Using R134a Refrigerant to Cool Power Electronics Devices

    <p>Power electronics are vital to the operation and performance of hybrid-electric vehicles (HEVs) because they provide the interface between the energy sources and the traction drive motor. As with any “real” system, power electronic devices have losses in the form of heat energy during normal …

    ut-knoxville Repository record for A Two-Phase Cooling Method Using R134a Refrigerant to Cool Power Electronics Devices (opens in a new tab)

  3. Thermal management of discretized heaters using CuW microchannel heat sinks and FC3283 for laser diode applications

    Single-phase cooling using microchannel heat sinks (MCHS) has become a popular approach for overcoming the thermal challenges associated with high-powered microelectronic devices. Thermal management is one of the largest barriers to higher power densities in electronics and frequently limits …

    colostate Repository record for Thermal management of discretized heaters using CuW microchannel heat sinks and FC3283 for laser diode applications (opens in a new tab)

  4. EXPERIMENTAL INVESTIGATION OF CERTAIN INTERNAL CONDENSING AND BOILING FLOWS: THEIR SENSITIVITY TO PRESSURE FLUCTUATIONS AND HEAT TRANSFER ENHANCEMENTS

    … – to – microscale (such as are used in high power electronics cooling, weapons cooling in aircraft, etc.) condensers and boilers are shear/pressure driven. They are of increasing interest to system engineers for thermal management because flow boilers and flow condensers offer both high fluid …

    mtu Repository record for EXPERIMENTAL INVESTIGATION OF CERTAIN INTERNAL CONDENSING AND BOILING FLOWS: THEIR SENSITIVITY TO PRESSURE FLUCTUATIONS AND HEAT TRANSFER ENHANCEMENTS (opens in a new tab)

  5. Coupling electrolysis and surface patterning to improve onset of nucleate boiling and bubble departure in pool boiling heat transfer

    … heater inside the copper block to supply power to the test chip, along with a series of vertically arranged thermocouples to accurately determine the heat flux and surface temperature. Using this setup, pool boiling was first measured for plain silicon, plain gold, and gold microstrip …

    bu Repository record for Coupling electrolysis and surface patterning to improve onset of nucleate boiling and bubble departure in pool boiling heat transfer (opens in a new tab)

  6. Experimental and Theoretical Investigation of a Multiphase Reaction in a Compact Heat Exchanger-Reactor (HEX Reactor)

    … with keeping pace to the rapidly increasing cooling demands of high performance electronics. In addition to requiring the removal of higher heat fluxes as device miniaturization continues, the operating temperature limits remain essentially the same. The rapid removal of large quantities of …

    tamu Repository record for Experimental and Theoretical Investigation of a Multiphase Reaction in a Compact Heat Exchanger-Reactor (HEX Reactor) (opens in a new tab)

  7. Design and performance characterization of high power density air-cooled compact condenser heat exchangers

    … condenser heat exchangers with exceptional power density performance in excess of 100 W/cm3. This exceptional heat exchanger performance is attributed to the implementation of high-speed compressible air flow in circular microchannels and two-phase condensation flow of refrigerant in …

    uiuc Repository record for Design and performance characterization of high power density air-cooled compact condenser heat exchangers (opens in a new tab)

  8. Integrated Thermal Design and Optimization Study for Active Integrated Power Electronic Modules (IPEMs)

    … is one of many critical tasks in the design of power electronic systems. It has become increasingly important as a result of the introduction of high power density and integrated modules. It has also been realized that higher temperatures do affect reliability due to a variety of physical …

    vt Repository record for Integrated Thermal Design and Optimization Study for Active Integrated Power Electronic Modules (IPEMs) (opens in a new tab)

  9. Thermal-hydraulic characterization of single- and two-phase immersion cooling for electronic modules

    Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2026-02-19 without embargo terms

    uiuc Repository record for Thermal-hydraulic characterization of single- and two-phase immersion cooling for electronic modules (opens in a new tab)

  10. Flow Boiling in Meso-Scale Pin-Fin Coldplates

    Coldplates are a critical component in various cooling applications, such as cooling of data centers, high-end central processing units (CPUs) and graphics processing units (GPUs), and the thermal management of power electronics. The rising demand for computational resources, high-power-density …

    gatech Repository record for Flow Boiling in Meso-Scale Pin-Fin Coldplates (opens in a new tab)