Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 32 for “"power loading"”.

  1. Robust Power Loading for the TDD MISO Downlink with Outage Constraints

    <p>We consider the problem of power allocation for the single-cell multiple-input single- output (MISO) downlink in a time division duplex (TDD) system. In such systems, the base station (BS) acquires information about the channel state during the training component of the uplink phase. The …

    mcmaster Repository record for Robust Power Loading for the TDD MISO Downlink with Outage Constraints (opens in a new tab)

  2. Quantifying Power Loading of Self-Supported Carbon Nanotube Fiber Devices for Gas Heating

    … materials that can operate reliably with high power loading at various temperature ranges. Many electrical heating devices utilize Joule heating of metal alloys (e.g. Kanthal or Nichrome) to transfer heat to flowing gases. Carbon nanotube fibers (CNTFs) are promising options to replace metal …

    rice Repository record for Quantifying Power Loading of Self-Supported Carbon Nanotube Fiber Devices for Gas Heating (opens in a new tab)

  3. FUNDAMENTAL UNDERSTANDING OF THE CYCLOIDAL-ROTOR CONCEPT FOR MICRO AIR VEHICLE APPLICATIONS

    … the viability of the cyclorotor concept for powering a hover-capable micro-air-vehicle (MAV) was examined through both experiments and analysis. Experimental study included both performance and flow field measurements on a cyclorotor of span and diameter equal to 6 inches. The analysis …

    maryland Repository record for FUNDAMENTAL UNDERSTANDING OF THE CYCLOIDAL-ROTOR CONCEPT FOR MICRO AIR VEHICLE APPLICATIONS (opens in a new tab)

  4. Study of efficient link adaptation schemes in wireless orthogonal frequency division multiplexing (OFDM) systems

    … can be efficiently amplified from random power allocation and opportunistic scheduling. Higher spectral efficiency can be achieved without an increase of complexity or feedback amount compared to conventional multiuser OFDM systems using equal power allocation. This dissertation also …

    texas Repository record for Study of efficient link adaptation schemes in wireless orthogonal frequency division multiplexing (OFDM) systems (opens in a new tab)

  5. Adaptive OFDM Cooperative Systems

    … Throughout our work, we adaptively change loaded power and/or bit to the Orthogonal Frequency Division Multiplexing (OFDM) symbol in order to minimize bit error rate or maximize the throughput. In the first part of this dissertation, we consider single-relay OFDM system with amplify-and-forward …

    waterloo Repository record for Adaptive OFDM Cooperative Systems (opens in a new tab)

  6. Dissociation of carbon dioxide in atmospheric pressure microchannel plasma devices

    … the device structures which leads to higher power loading and device packing density.

    uiuc Repository record for Dissociation of carbon dioxide in atmospheric pressure microchannel plasma devices (opens in a new tab)

  7. Minimum BER Block Precoders

    … of discrete multitone (DMT) with water filling power loading, and cyclic prefix orthogonal frequency division multiplexing (CP-OFDM). The CP-MBER precoder is shown to be a two-stage modification IV of the transmitting scheme for tandard DMT. Firstly the water filling algorithm is replaced by the …

    mcmaster Repository record for Minimum BER Block Precoders (opens in a new tab)

  8. On the Improvement of the Achievable bit rate in Multicarrier Communication Systems Using Signal Processing Techniques

    … outputs renders the conventional water-filling power loading algorithm suboptimal, we propose an efficient power loading algorithm for Fl\IT that enables higher achievable bit rates.</p> <p>Discrete multitone (DMT) is a popular multi-carrier communication scheme, mainly due to its rather low …

    mcmaster Repository record for On the Improvement of the Achievable bit rate in Multicarrier Communication Systems Using Signal Processing Techniques (opens in a new tab)

  9. Techniques for Enabling High-Order Modulation Formats in Short-Reach Optical Communication Networks Based on Directly Modulated Lasers

    … and the dispersion-induced frequency-selective power fading are major issues which limit the system performance. The primary objective of this research is to enhance the transmission performance in IM/DD systems, with a focus on using a transmitter based on a directly-modulated laser (DML). The …

    queens Repository record for Techniques for Enabling High-Order Modulation Formats in Short-Reach Optical Communication Networks Based on Directly Modulated Lasers (opens in a new tab)

  10. Offset-Based Beamforming: A New Approach to Robust Downlink Transmission

    … (SINRs) with high probability under certain power constraints. Unfortunately, the SINR outage constraint is intractable, and precise formulations of these problems are fundamentally hard to solve. The contribution of this thesis is a suite of algorithms that provide high-quality approximate …

    mcmaster Repository record for Offset-Based Beamforming: A New Approach to Robust Downlink Transmission (opens in a new tab)

  11. Characterization of Transient Heating in Power Electronic Devices and its Implications for Die Attached Reliability

    Military and commercial interest in the use of power electronics for applications requiring extreme operating conditions and/or placement in extreme environments is driving research to identify and develop packaging technologies that can withstand these conditions. Specifically, there is an …

    maryland Repository record for Characterization of Transient Heating in Power Electronic Devices and its Implications for Die Attached Reliability (opens in a new tab)

  12. Front end x-ray beam position monitors at the Canadian Light Source

    … of beam motion was achieved; and the thermal power loading capacity has been tested to the 2/5 of maximum value. An independent white beam profiler, comprised of a converter crystal and image acquisition software, was constructed to corroborate the functionality of the XBPM.

    sask Repository record for Front end x-ray beam position monitors at the Canadian Light Source (opens in a new tab)

  13. Asynchronous bi-directional relay-assisted communication networks

    … design approach, to calculate the subcarrier power loading at the transceivers as well as the relay beamforming weights. In a single-carrier communication, assuming a block transmission/reception scheme, block channel equalization is used at the both transceivers to combat the …

    uoit Repository record for Asynchronous bi-directional relay-assisted communication networks (opens in a new tab)

  14. Development and Flight Testing of a 25-Kilogram Quad-Cyclocopter

    … of 45° because it provided high thrust and power loading (thrust/power) at a low operating rotational speed of 700 RPM. The cyclorotor blades are manufactured with a foam core and carbon fiber skin resulting in lightweight blades with large bending and torsional stiffness. The rotor …

    tamu Repository record for Development and Flight Testing of a 25-Kilogram Quad-Cyclocopter (opens in a new tab)

  15. Hardware model of a shipboard Zonal Electrical Distribution System (ZEDS) Alternating Current/Direct Current (AC/DC)

    … support experimentation with AC and DC ZEDS power loading and protection. The hardware models reflect the AC ZEDS architecture employed on the DDG-51 class destroyers. The emulator is a three phase electrical system with both port and starboard buses, a computer interface to control the …

    nps Repository record for Hardware model of a shipboard Zonal Electrical Distribution System (ZEDS) Alternating Current/Direct Current (AC/DC) (opens in a new tab)

  16. Analysis and design of OFDM systems : loading and nonlinear distortion mitigation

    … distortion caused by the practical non-linear power amplifier. To address the first subject, a novel analytical method for bit error rate evaluation of coded OFDM systems for a specific channel realization is proposed. As this method might be too complex for some applications, we also propose a …

    ubc Repository record for Analysis and design of OFDM systems : loading and nonlinear distortion mitigation (opens in a new tab) Download PDF for Analysis and design of OFDM systems : loading and nonlinear distortion mitigation (opens in a new tab)

  17. Dynamic resource allocation for OFDM-based cognitive radio systems

    … of link adaptation algorithms (e.g., adaptive power and bit loading) for orthogonal frequency division multiplexing (OFDM)-based CR systems. Different power and bit loading schemes can be designed for CR users which exploits the time varying nature of fading gains across the OFDM subcarriers. …

    ubc Repository record for Dynamic resource allocation for OFDM-based cognitive radio systems (opens in a new tab) Download PDF for Dynamic resource allocation for OFDM-based cognitive radio systems (opens in a new tab)

  18. Laser ablation with copper vapour lasers

    … gas pressure to the specific electrical input power loading and the degree of insulation of the plasma tube. The design and characterisation of a Master-Oscillator Power-Amplifier system based on a smallbore oscillator is also described, focusing on pulse stretching techniques to provide …

    oxford Repository record for Laser ablation with copper vapour lasers (opens in a new tab)

  19. Conceptual Design of MALE UAVs

    … certain design variables such as wing loading, power loading, aspect ratio and cruise altitude in the conceptual design phase for MALE (medium altitude long endurance) UAVs. Aircraft characteristics from MALE UAVs such as the MQ-9 predator and MQ-1 reaper will used for a comparative …

    wvu Repository record for Conceptual Design of MALE UAVs (opens in a new tab)

  20. Improvement and validation of OSCAR-3 usage in SAFARI-1 core modelling : focus on cross section library creation and target

    … methods under consideration for modelling the on-power loading and unloading of the target plates use the core calculational code system, OSCAR-3. Results are evaluated based on comparison to plant data, results from existing methodologies, and past experience of reload planning operation. Effects …

    nwu-za Repository record for Improvement and validation of OSCAR-3 usage in SAFARI-1 core modelling : focus on cross section library creation and target (opens in a new tab)

Page 1 of 2