Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"power peaking"”.

  1. Studies of a CANDU-PHW Reactor Core Containing an Annulus of Enriched Uranium

    … uranium requirements, fuel costs, stability, and power peaking upon refuelling are investigated. It is found that these hybrid cores offer potential savings of 10% to 20% in fuel costs and uranium utilization compared to the present CANDU-PHW core, and are only slightly less stable. However, power …

    mcmaster Repository record for Studies of a CANDU-PHW Reactor Core Containing an Annulus of Enriched Uranium (opens in a new tab)

  2. VHTR Core Shuffling Algorithm Using Particle Swarm Optimization ReloPSO-3D

    … of 120 fuel blocks that has a minimized power peaking and/or increased core life under safety constraints among the 120! combinations. For evaluating each LP during the shuffling, a fitness function that is developed from the parameters affecting the power peaking and core life is …

    tamu Repository record for VHTR Core Shuffling Algorithm Using Particle Swarm Optimization ReloPSO-3D (opens in a new tab)

  3. Perturbation theory in nuclear fuel management optimization

    … fuel within the reactor core. In most nuclear power reactors, fuel loading patterns which have a minimum power peak are economically desirable to allow the reactors to operate at the highest power density and to minimize the possibility of fuel failure;In this study, perturbation theory along …

    iastate Repository record for Perturbation theory in nuclear fuel management optimization (opens in a new tab)

  4. Fuel and Core Physics Considerations for a Pressure Tube Supercritical Water Cooled Reactor

    … batch fueling, cycle length, radial and axial power profiles, linear element ratings, and reduction of axial power peaking through graded enrichment along the fuel channel. Finally, a study of reactivity transients was performed using the FUELPIN heat transfer/point kinetics code.</p> <p>The …

    mcmaster Repository record for Fuel and Core Physics Considerations for a Pressure Tube Supercritical Water Cooled Reactor (opens in a new tab)

  5. Design of a mixed-spectrum long-lived reactor with improved proliferation resistance

    … Inherent passive safety criteria can be met, and power peaking phenomena at the fast/thermal interface was deemed to be manageable. Different design variants that can alleviate power peaking or leverage the ability of thorium-cycle breeding in the epithermal regime, were also investigated. …

    gatech Repository record for Design of a mixed-spectrum long-lived reactor with improved proliferation resistance (opens in a new tab)

  6. The influence of the number of fuel passes through a pebble bed core on the coupled neutronics/thermalhydraulics characteristics

    … studies to determine the contribution of nuclear power to the future energy supply. Many countries are investing in generation III and IV reactors such as the Westinghouse AP1000 because of its passive cooling system, which makes it attractive for its safety. The pebble bed high temperature gas …

    nwu-za Repository record for The influence of the number of fuel passes through a pebble bed core on the coupled neutronics/thermalhydraulics characteristics (opens in a new tab)

  7. Pwr fuel assembly optimization using adaptive simulated annealing coupled with translat

    … fuel assembly to be used in an operating nuclear power reactor. The two main cases of optimization are: one that finds the optimal 235U enrichment layout of the fuel pins in the assembly and another that finds both the optimal 235U enrichments where gadolinium burnable absorber pins are also …

    tamu Repository record for Pwr fuel assembly optimization using adaptive simulated annealing coupled with translat (opens in a new tab)

  8. Power distribution calculations in the High Flux Isotope Reactor for various control blade tantalum loadings

    … be reduced, without unacceptable impacts on core power shape. A two dimensional R-Z geometry model of the HFIR has been created for use in DORT for neutronics calculations. Weighted cross sections are generated using the SCALE package by running BONAMI, NITAWL, and XSDRN-PM. XSDRN is used for cell …

    ut-knoxville Repository record for Power distribution calculations in the High Flux Isotope Reactor for various control blade tantalum loadings (opens in a new tab)

  9. Dynamic Homogenization for Pebble Tracking Transport Using Artificial Neural Networks

    … limit the ability to accurately capture local power peaking and spectral gradients. This work addresses this challenge by integrating a neural-network-based multigroup cross-section predictor within the Pebble Tracking Transport (PTT) framework of the Griffin reactor physics application. A …

    tamu Repository record for Dynamic Homogenization for Pebble Tracking Transport Using Artificial Neural Networks (opens in a new tab) Embargoed until 2028-05-01

  10. Dynamic Homogenization for Pebble Tracking Transport Using Artificial Neural Networks

    … limit the ability to accurately capture local power peaking and spectral gradients. This work addresses this challenge by integrating a neural-network-based multigroup cross-section predictor within the Pebble Tracking Transport (PTT) framework of the Griffin reactor physics application. A …

    tamu Repository record for Dynamic Homogenization for Pebble Tracking Transport Using Artificial Neural Networks (opens in a new tab) Embargoed until 2028-05-01

  11. Reactivity control of a PWR 19x19 uranium silicide fuel assembly

    … margins while meeting the goal of increased power density. The I2S-LWR fuel assembly takes on a 19x19 lattice with reduced fuel rod dimensions relative to traditional Westinghouse-type 17x17 PWR fuel assemblies. It is anticipated that the I2S-LWR will eventually employ uranium silicide …

    gatech Repository record for Reactivity control of a PWR 19x19 uranium silicide fuel assembly (opens in a new tab)

  12. Physics-Informed Machine Learning Methodologies Using RAPID for Predicting Eigenvalue and 3-D Fission Distribution in JSI TRIGA Mark-II Research Reactor

    … within ±10 % rel. diff. in under 10 seconds. Power peaking factors calculated from the NN model's predicted fission values fell within -0.39 % to 0.91 % rel. diff., demonstrating that larger errors in the CR-FF regions had minimal impact.

    vt Repository record for Physics-Informed Machine Learning Methodologies Using RAPID for Predicting Eigenvalue and 3-D Fission Distribution in JSI TRIGA Mark-II Research Reactor (opens in a new tab)

  13. Development of serpent-based methods for I2S-LWR depletion modeling and sensitivity studies

    The I2S-LWR is an innovative nuclear power plant design with the power level and size of conventional large LWRs. While other new reactor designs use exotic coolants or are very small in size with unconfirmed claims of scalability, the I2S-LWR design promises safer operating and shutdown features …

    gatech Repository record for Development of serpent-based methods for I2S-LWR depletion modeling and sensitivity studies (opens in a new tab)

  14. Within-lattice nuclear fuel assembly loading optimization by simulated annealing

    … of 235U enrichment or the minimization of pin power peaking, both of which can act as constraints to one another (via penalty-based or hard constraints) . Alternatively, both objectives can be pursued concurrently through a multi-objective SA approach [3]. Finally, the designer can specify …

    iastate Repository record for Within-lattice nuclear fuel assembly loading optimization by simulated annealing (opens in a new tab)

  15. Conceptual development of a complete LWR reload design methodology based on generalized perturbation theory

    … important reactor performance characteristics (power peaking, reactivity coefficients, etc.) for any number of possible material configurations (assembly shuffling and burnable poison loadings). The response derivatives are computed using generalized perturbation theory (GPT) techniques.</p> …

    utk-theses Repository record for Conceptual development of a complete LWR reload design methodology based on generalized perturbation theory (opens in a new tab)

  16. Multiphysics Design and Simulation of a Tungsten-Cermet Nuclear Thermal Rocket

    … zoning is the best method for handling radial power peaking. In addition, a detailed simulation of a cermet design developed at the Argonne National Laboratory shows that modifications to the historical fuel element design are required to avoid overheating. The final part investigates the …

    tamu Repository record for Multiphysics Design and Simulation of a Tungsten-Cermet Nuclear Thermal Rocket (opens in a new tab)

  17. Optimization of In-Core Fuel Management in CANDU Nuclear Reactors

    … and initial fuel enrichment.</p> <p>In an on-power refuelled reactor such as CANDU, depletion effects are quite localized and the global power shape results from the distribution of fuelling rates and fixed absorbers in the core. An important group of fixed absorbers, called adjuster rods, can …

    mcmaster Repository record for Optimization of In-Core Fuel Management in CANDU Nuclear Reactors (opens in a new tab)

  18. Predictive Correlation for Thermal Load Redistribution for Failing Heat Pipe Arrays in Nuclear Applications

    … The normalized thermal load, termed heat pipe power peaking factor (𝜁), is collected after simulating a failed central heat pipe in each of the geometries. As one would expect, 𝜁 will increase for each surviving heat pipe for all geometries, but the correlation efforts will help predict the …

    tamu Repository record for Predictive Correlation for Thermal Load Redistribution for Failing Heat Pipe Arrays in Nuclear Applications (opens in a new tab)

  19. Predictive Correlation for Thermal Load Redistribution for Failing Heat Pipe Arrays in Nuclear Applications

    … The normalized thermal load, termed heat pipe power peaking factor (𝜁), is collected after simulating a failed central heat pipe in each of the geometries. As one would expect, 𝜁 will increase for each surviving heat pipe for all geometries, but the correlation efforts will help predict the …

    tamu Repository record for Predictive Correlation for Thermal Load Redistribution for Failing Heat Pipe Arrays in Nuclear Applications (opens in a new tab)

  20. Predictive Correlation for Thermal Load Redistribution for Failing Heat Pipe Arrays in Nuclear Applications

    … The normalized thermal load, termed heat pipe power peaking factor (𝜁), is collected after simulating a failed central heat pipe in each of the geometries. As one would expect, 𝜁 will increase for each surviving heat pipe for all geometries, but the correlation efforts will help predict the …

    tamu Repository record for Predictive Correlation for Thermal Load Redistribution for Failing Heat Pipe Arrays in Nuclear Applications (opens in a new tab)

Page 1 of 2