Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 210 for “"preamplifier"”.

  1. Cylindrical Detector and Preamplifier Design for Detecting Neutrons

    Tissue equivalent proportional counters are frequently used to measure dose and dose equivalent in mixed radiation fields that include neutrons; however, detectors simulating sites 1?m in diameter underestimate the quality factor, Q, for low energy neutrons because the recoil protons do not cross …

    tamu Repository record for Cylindrical Detector and Preamplifier Design for Detecting Neutrons (opens in a new tab)

  2. A hybridized charge-sensitive preamplifier with improved timing resolution

    … degrades either the energy or timing data. Four preamplifier configurations used to process the charge signal and provide both timing and energy data are analyzed theoretically. The results indicate that one configuration in particular does not degrade either signal if certain risetime and noise …

    ut-knoxville Repository record for A hybridized charge-sensitive preamplifier with improved timing resolution (opens in a new tab)

  3. Low voltage vertical recording preamplifier for hard disk drives

    Higher data rate hard disk drives(HDD) and improved read channel electronics are demanding preamplifier performance be extended well beyond 1 Gb/s. Historically, preamplifier power requirements were of low priority; however, with increased demand for battery powered devices such as laptops, MP3 …

    tamu Repository record for Low voltage vertical recording preamplifier for hard disk drives (opens in a new tab)

  4. Low noise design of a buffered direct injection transconductance preamplifier for a focal plane array

    … injection (BDI) common gate transconductance preamplifiers are typically used to couple infrared focal plane arrays to signal processing circuitry. This yields improved charge transfer efficiency over other methods of charge coupled device (CCD) readout. The use of CMOS technology in this …

    ucf Repository record for Low noise design of a buffered direct injection transconductance preamplifier for a focal plane array (opens in a new tab)

  5. Measurements, analysis and modeling of the performance of direct detection receivers with an optical preamplifier

    … optical fiber communication systems. In the preamplifier configuration, a bandpass filter is required to reduce the amplified spontaneous emission (ASE) noise in order to provide satisfactory bit error ratios (BER). In this thesis we examine the influence of the filter characteristics on …

    vt Repository record for Measurements, analysis and modeling of the performance of direct detection receivers with an optical preamplifier (opens in a new tab)

  6. A Low Noise CMOS Charge-Sensitive Preamplifier with Pole/Zero Compensation for a Neutron Detection System

    … of a low noise CMOS charge sensitive preamplifier with pole/zero compensation for a neutron detector to be installed on the Spallation Neutron Source in Oak Ridge, TN. The first prototype chip has been fabricated using Taiwan Semiconductor Manufacturing Company (TSMC) 0.35 µm process. …

    ut-knoxville Repository record for A Low Noise CMOS Charge-Sensitive Preamplifier with Pole/Zero Compensation for a Neutron Detection System (opens in a new tab)

  7. A study of array snr and coupling as a function of the input impedance of preamplifier

    … most coil designers prefer placing low impedance preamplifiers near the coil. The further the pre-amplifiers are from the coil, the greater will be the signal loss due to transmission and higher will be its input impedance as perceived at the coil which would degrade inter-coil isolation. Owing to …

    tamu Repository record for A study of array snr and coupling as a function of the input impedance of preamplifier (opens in a new tab)

  8. Broad-band and scalable circuit-level model of MSM PD for co-design with preamplifier in front-end receiver applications

    An accurate and fast behavior modeling procedure is presented for codesign of active optical device with circuitry. The developed method is based upon defining partial elements (PEs) and their measurement-based partial element equivalent circuits (M-PEEC), associating design rules with them, and …

    gatech Repository record for Broad-band and scalable circuit-level model of MSM PD for co-design with preamplifier in front-end receiver applications (opens in a new tab)

  9. Application of Positive Feedback Techniques to Charge-Sensitive Preamplifiers

    … positive feedback techniques to charge-sensitive preamplifiers for the purpose of improving their performance characteristics and versatility is considered. Improvements in sensitivity of charge gain in input capacitance, preamplifier output pulse rise-time, and ability to terminate long input …

    utk-theses Repository record for Application of Positive Feedback Techniques to Charge-Sensitive Preamplifiers (opens in a new tab)

  10. CMOS Readout Interfaces for MEMS Capacitive Microphones

    … dissertation consist of a front-end, which is a preamplifier, and a backend which converts the output of the preamplifier into a digital representation. The first interface presents a bootstrapped preamplifier and a third-order sigma-delta modulator (SDM) for analog-to-digital conversion. The …

    trento Repository record for CMOS Readout Interfaces for MEMS Capacitive Microphones (opens in a new tab)

  11. Investigation of HBT preamplification for high speed optical communication systems.

    … a Common-Collector-Cascode traveling wave HBT preamplifier is developed, resulting in an expression for the preamplifier's equivalent input noise current density. A photoreceiver, consisting of a P-I-N and GaAs HBT MMIC distributed amplifier, was implemented using Nortel's GaAs HBT (f T = …

    ottawa-retro Repository record for Investigation of HBT preamplification for high speed optical communication systems. (opens in a new tab)

  12. An optically pumped iodine laser amplifier

    … laser is described. In particular, a preamplifier is designed to amplify a 100 mJ laser pulse of 1 ns. duration which, by natural divergence, is contained in a beam of 2.5 cms diameter. Experimental studies of the sub-system of this preamplifier and the associated diagnostics are …

    ubc Repository record for An optically pumped iodine laser amplifier (opens in a new tab) Download PDF for An optically pumped iodine laser amplifier (opens in a new tab)

  13. An Investigation of Broadband Current Preamplification for Obtaining Simultaneous High-Resolution Energy and Time Information from Nuclear Radiation Detectors

    … is commonly known as the charge-sensitive preamplifier. Criteria are developed for differentiating the output voltage pulse of the charge-sensitive preamplifier without degrading the signal-to-noise ratio. Subsequently, a new broadband, shunt-feedback amplifier is described having a current …

    utk-theses Repository record for An Investigation of Broadband Current Preamplification for Obtaining Simultaneous High-Resolution Energy and Time Information from Nuclear Radiation Detectors (opens in a new tab)

  14. Analysis and Design of a Pulsed GaAs Laser Rangefinder Receiver

    … to optimize laser power, receiver aperture and preamplifier bandwidth. Two methods of threshold detection are presented and compared. Experimental results include receiver preamplifier transfer function and threshold detector performance.

    ucf Repository record for Analysis and Design of a Pulsed GaAs Laser Rangefinder Receiver (opens in a new tab)

  15. Synthesis and evaluation of a charge sensitive amplifier for neutron counters

    … Part of the electronic subsystem is a specific preamplifier. The pulse-height distribution curve of the existing preamplifier used in the neutron monitor system at the Centre for Space Research at the North-West University was found to be incorrect, and therefore the pulse-height information …

    nwu-za Repository record for Synthesis and evaluation of a charge sensitive amplifier for neutron counters (opens in a new tab)

  16. A low-noise, wide-band CMOS charge-sensitive preamplifier for use with a cadmium zinc telluride strip detector in a high-resolution small animal x-ray CT system

    <p>A low-noise, wide-band CMOS charge-sensitive preamplifier has been designed for use with a Cadmium Zinc Telluride (CZT) strip detector in the Oak Ridge NationalLaboratory's (ORNL) MicroCAT small animal x-ray CT imaging system. The Characteristics of the CZT strip detector have been studied to …

    ut-knoxville Repository record for A low-noise, wide-band CMOS charge-sensitive preamplifier for use with a cadmium zinc telluride strip detector in a high-resolution small animal x-ray CT system (opens in a new tab)

  17. The design of GaAs HEMT and HBT Bessel-type transimpedance amplifiers

    … cheap semiconductor processes. The optical preamplifier (transimpedance amplifier) receives optical information and converts it to a useful electrical form. It must operate at high speed, contribute little distortion to the input signal, and add little electrical noise to the incoming …

    tamu Repository record for The design of GaAs HEMT and HBT Bessel-type transimpedance amplifiers (opens in a new tab)

  18. Development of a measurement system optimized for detecting prebreakdown currents in liquid dielectrics

    … capture a record of the currents). Sometimes a preamplifier is included to allow viewing of lower level currents. This research began with a study of the factors limiting the bandwidth and noise level of such a measurement system. A simple circuit model for the test cell was developed and used. …

    utk-theses Repository record for Development of a measurement system optimized for detecting prebreakdown currents in liquid dielectrics (opens in a new tab)

  19. Construction and testing of compact low noise hydrophones with extended frequency response

    … simple low-noise hydrophone design with internal preamplifier is presented. This design is similar to published designs and is a variation of the design developed in the NPS thesis by Miguel Alvarado [2003], except that several improvement features are included. These include a simplification of …

    nps Repository record for Construction and testing of compact low noise hydrophones with extended frequency response (opens in a new tab)

  20. The development of a germanium lithium-drift gamma spectrometer and preliminary applications to positron physics

    … detectors and low-noise field-effect transistor preamplifiers are discussed. Modifications were made to available preamplifier circuits with a slight improvement in noise characteristics. A very-low-noise preamplifier using a 2N3823 field-effect transistor was tested, and an unconventional design …

    ubc Repository record for The development of a germanium lithium-drift gamma spectrometer and preliminary applications to positron physics (opens in a new tab) Download PDF for The development of a germanium lithium-drift gamma spectrometer and preliminary applications to positron physics (opens in a new tab)

Page 1 of 11