Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 15 of 15 for “"precision cutting"”.

  1. Precision cutting of hardwoods by using a high energy carbon dioxide laser

    Thesis (M.S.)--Michigan State University. Department of Metallurgy, Mechanics, and Materials Science, 1990

    msu Repository record for Precision cutting of hardwoods by using a high energy carbon dioxide laser (opens in a new tab)

  2. Cutting Mechanisms and Control Systems Required for Precision Cutting with an Autonomous Lettuce Harvester

    … that is used to control navigation and the cutting height adjustment to ensure harvest consistency. Control systems were designed using the Danfoss plus+1 Guide platform and subsequent components. Cutting height is adjusted via a PID controller that uses the continuous output from a pair of …

    calpoly Repository record for Cutting Mechanisms and Control Systems Required for Precision Cutting with an Autonomous Lettuce Harvester (opens in a new tab)

  3. Energy consumption and process sustainability of hard milling

    … milling of hardened steels) is an important precision cutting process. Compared with grinding, hard milling may produce superior surface integrity of precision components such as bearings, dies, and molds. However, the poor machinability of hard milling leads to very low material removal …

    alabama Repository record for Energy consumption and process sustainability of hard milling (opens in a new tab)

  4. Single‑incision transumbilical surgery (SITUS) versus single‑port laparoscopic surgery (SPLS) versus conventional laparoscopic surgery (CLS) im Trainingslabor

    … In allen Aufgaben (außer bei precision cutting) war die CLS-Methode und die SITUS-Technik signifikant schneller und genauer als die SPLS-Technik. Unter den Gruppen CLS und SITUS gab es allerdings keinen signifikanten Unterschied. <br>Zusammenfassung: Die SITUS-Technik bewies, …

    freiburg-diss Repository record for Single‑incision transumbilical surgery (SITUS) versus single‑port laparoscopic surgery (SPLS) versus conventional laparoscopic surgery (CLS) im Trainingslabor (opens in a new tab)

  5. Subsurface Understanding of the Formation of Hierarchical Surface Structures Produced with Femtosecond Laser Pulses

    Femtosecond lasers were first utilized for precision cutting/drilling and spectroscopy, but as peak laser power increased, so did the number of applications, including surface functionalization. Femtosecond laser pulses can create self-organized micro/nanostructures on the surface of most materials …

    nebraska Repository record for Subsurface Understanding of the Formation of Hierarchical Surface Structures Produced with Femtosecond Laser Pulses (opens in a new tab)

  6. Šalutinės UV spinduliuotės paveiktų daugiasluoksnių dielektrinių veidrodžių tyrimas /

    … processing and military market as a tool for precision cutting application or ultrahigh resolution measurements. At this moment high price of laser sources are still limiting range of commercial application. Reducing cost of laser sources and components are the main task of global …

    vilnius Repository record for Šalutinės UV spinduliuotės paveiktų daugiasluoksnių dielektrinių veidrodžių tyrimas / (opens in a new tab)

  7. On the Development of Conductive Textile Antennas

    … been developed using a laser machine with high precision cutting capabilities. The textile antennas are comprised of a conductive fabric layer that is laser defined and can be easily incorporated into uniforms and garments using a simple iron-on process. We have developed and present a monopole …

    ut-knoxville Repository record for On the Development of Conductive Textile Antennas (opens in a new tab)

  8. Nonlinear effects in multimode optical fibers

    … demanded by fiber lasers used in industry for precision cutting, welding and drilling functions, and used elsewhere for the generation of white light sources used in fiber communication, medical and precision time keeping applications. This thesis explores the theory of nonlinear effects in …

    soton Download PDF for Nonlinear effects in multimode optical fibers (opens in a new tab)

  9. Three dimensional milling using an abrasive waterjet

    … have been developed...As a result, a controlled cutting condition could be established, with the cut quality conforming to the aerospace industry and its customers"--Abstract, page iii.

    must-thes Repository record for Three dimensional milling using an abrasive waterjet (opens in a new tab)

  10. ANALYSIS AND OPTIMIZATION OF LASER CUTTING PROCESS FOR STRUCTURAL STEELS

    Laser cutting is a widely used technology for precision cutting of various materials, in-cluding mild structural steel. It involves the use of a high-powered laser beam to melt, burn, or vaporize the material, resulting in a clean and accurate cut. This doctoral thesis presents a comprehensive …

    trento Repository record for ANALYSIS AND OPTIMIZATION OF LASER CUTTING PROCESS FOR STRUCTURAL STEELS (opens in a new tab)

  11. Druhy a charakteristika metod přesného stříhání

    Bakalářská práce se zabývá metodami přesného stříhání a jejich rozborem. Metody používané pro malosériovou výrobu byly rozebrány pouze stručně z důvodu jejich malého výskytu v praxi. V případě přesného stříhání s nátlačnou hranou je zpracovaná rozsáhlá rešerše ohledně jednotlivých parametrů …

    brno-tech Repository record for Druhy a charakteristika metod přesného stříhání (opens in a new tab)

  12. Návrh technologie výroby součásti "Řetězové kolo"

    Cílem této diplomové práce je navržení vhodné technologie výroby pro součást řetězové kolo z materiálu 11 500, které je určeno pro malý lehký motocykl o objemu do 50 cm3 a je nyní ve stádiu prototypu. Práce je zaměřena především na technologii přesného stříhání s nátlačnou hranou, jenž také byla …

    brno-tech Repository record for Návrh technologie výroby součásti "Řetězové kolo" (opens in a new tab)

  13. Výroba součásti přesným stříháním

    Bakalářská práce je zaměřena na návrh technologie výroby spojovací lamely automatické převodovky DSG. Před výběrem nejvhodnější technologie pro výrobu spojovací lamely bylo provedeno hodnocení jednotlivých dostupných technologií, z nichž byla vybrána jako nejvhodnější metoda přesného stříhání s …

    brno-tech Repository record for Výroba součásti přesným stříháním (opens in a new tab)

  14. Resonant ultrasonic bone penetrating needles

    … surgical devices offer advantages of low cutting force, high accuracy and preservation of soft tissues. This thesis details a study of the design, analysis and evaluation of a class of novel power ultrasonic needles for bone penetration, particularly biopsy. Micrometric vibrations …

    glasgow Repository record for Resonant ultrasonic bone penetrating needles (opens in a new tab) Download PDF for Resonant ultrasonic bone penetrating needles (opens in a new tab)

  15. Variantní řešení výroby jezdce

    Projekt vypracovaný v rámci bakalářského studia oboru Strojní inženýrství předkládá návrh technologií použitelných při výrobě jezdce, který je součástí aretačního mechanismu vyráběného firmou TOKOZ a.s., a podává zhodnocení jejich vhodnosti. Zvažovanými technologiemi jsou odlévání, vstřikování …

    brno-tech Repository record for Variantní řešení výroby jezdce (opens in a new tab)