Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 170 for “"precursor solution"”.
-
Process Optimization for the Synthesis of Gold Nanoparticles from a Mixed Metal Precursor Solution
… multiple functional products from a mixed metal precursor solution is explored. The initial precursor solutions contained varying ratios of gold and copper, gold and nickel, and finally a ternary solution of gold, copper, and nickel. The amount of gold was kept constant, while the amount of …
-
High Fill Factor Perovskite Solar Cells by Temperature Control in Single and Mixed Halide Precursor Solution and Films
… to conventional silicon solar cells due to their solution processability and low production cost. They have higher power conversion efficiency than that of organic solar cells and potential to overcome the efficiency of inorganic solar cells. Different parameters such as annealing temperature, …
-
The synthesis of metal oxide-based xerogels via the epoxide addition and sacrificial template method
… synthesis requires fours steps: selection of precursor solution, formation of sol-gel, aging of sol-gel, and drying of the sol-gel network. The last two processing steps are time-consuming and can take up to two weeks to complete. The new sol-gel method combines the epoxide addition method and …
-
Alternative forming fluids for TRISO fuel kernel production
… process forms the fuel kernel by dropping a cold precursor solution into a column of hot trichloroethylene (TCE). The temperature difference drives the liquid precursor solution to precipitate the metal solution into gel spheres before reaching the bottom of a production column. Over time, …
-
STRUCTURE AND PROPERTIES OF PIEZOELECTRIC NANOFIBERS FOR ELECTROMECHANICAL COUPLING APPLICATIONS
… fabricated by electrospinning process using a precursor solution modified with hydrated salt. Introducing hydrated salts in PVDF precursor solution proves very effective in improving the polar β-phase content, promoted by hydrogen bonds formation between fluorine and hydroxyl group. Apart from …
-
Controlled solvothermal synthesis of photocatalytic nanostructures
… the solvothermal reaction parameters including precursor solution compositions, trends and patterns relating to crystallite size, phase composition and nanostructure type were obtained. This led to the development of a proposed diffusion controlled model which relates the solvothermal reaction …
-
Perovskite Precursor Solutions are Simple: A Theoretical Study of the Methylammonium Lead Iodide Solution Species
… on hybrid organic-inorganic perovskite (HOIPs) precursor solutions. First, we show that cluster studies provide an efficient model to obtain information on the interactions between the iodoplumbate and A-site cations in the APbI3 complex. Using cluster models, we provide evidence to support the …
-
Performance and stability study of solid oxide fuel cell nanocomposite electrodes
… and new electrode synthesis methods like precursor solution infiltration, nano-sized, highly catalytically active materials like La0.6Sr0.4Co0.8Fe0.2O3- (LSCF), Sm0.5Sr0.5CoO3- (SSC) and Gd0.1Ce0.9O2 (GDC) have all been successfully fabricated at relatively low temperatures. A new …
-
Effects of Surfactant Concentrations on Perovskite Emitters Embedded in Polystyrene
… the addition of a surfactant into the precursor solution has been shown to increase stability and allow for color tuning by exploiting quantum confinement effects. However, the effects of surfactants typically used to stabilize perovskites in solution have not been explored in this …
-
FORMULATION ENGINEERING OF BLADE COATED CESIUM LEAD BROMIDE PEROVSKITE THIN FILMS
… of thin films by analyzing the effect of precursor solution chemistry and processing conditions on the crystal nucleation and growth of the perovskite from solution.The all-inorganic CsPbBr3 perovskite has recently attracted tremendous interest for applications in solar cells owing to its …
-
Microstructured materials synthesis via salt-assisted ultrasonic spray pyrolysis
… these materials, however, require expensive precursors or templates and complicated, multi-step procedures. Ultrasonic spray pyrolysis (USP) is an industrially-scalable technique that has been shown to yield relatively monodisperse sub-micron particles in a continuous process using …
-
De novo Synthesis of Iron/Carbon Composites from Waste Precursors for Hexavalent Chromium Removal
… and scalability associated with the precursor, process, and energy demand. Conventionally, Fe/C composites for Cr(VI) removal are prepared by impregnating an iron precursor solution onto porous carbon, followed by calcination and pyrolysis. However, this method is slow, …
-
Controlling the formulation structures and properties of Low Molecular Weight Gelators
… is first suspended in water at high pH to form a precursor solution. This precursor solution can then be used to form hydrogels by various trigger methods including, but not limited to, a pH change, addition of metal ions or by temperature change. Structures are formed by the gelator molecules in …
-
Obtenção e caracterização de dióxido de estanho nanoestruturado pelo método de síntese contínua por combustão em solução
Continuous Synthesis by Solution Combustion was employed in this work aiming to obtain tin dioxide nanostructured. Basically, a precursor solution is prepared and then be atomized and sprayed into the flame, where its combustion occurs, leading to the formation of particles. This is a recent …
-
An investigation of mixed oxide combustion catalysts
… investigated included stirring time of precursor solution prior to addition o f base, precursor concentrations, pH or volume of base added and addition o f base to precursor solution or vica versa. Of all the mixed oxides studied, the manganese-zirconia system, prepared by addition o f …
-
PREPARATION AND APPLICATION OF PEROVSKITE-TYPE SOLID ELECTROLYTES FOR ALL SOLID STATE LITHIUM ION BATTERIES
… LSNZ electrolyte was prepared by molecular precursor method, which could produce precursor solution with high homogeneity. All-solid-state batteries LiMn1.5Ni0.5O4 (LMNO)/LSTZ/Li4Ti5O12 (LTO) were constructed and characterized by impedance measurement and cyclic voltammetry.
-
Direct liquid injection metalorganic chemical vapor deposition of ferroelectric PZT films
… for the first time. By utilizing a cheap DLI precursor delivery system, the problems encountered in the conventional precursor delivery system by bubblers were eliminated. Highly uniform PZT films with a spatial variation in film composition of less than ± 3.0% were grown along a range of an 8 …
-
Novel approaches in photoelectrode design for dye-sensitised solar cells
… mechanical mixing and solvent evaporation and precursor solution evaporation. Titanium oxides (TiO2) were elected as surface dopants in the C/N matrix and detailed studies have been performed on the role of; TiO2, and textural parameters and morphology on the; optical and electronic properties …
-
Cezio įtaka organinių-neorganinių perovskitų saulės elementų optinėms ir fotoelektrinėms savybėms /
… perovskite layers and to derive with efficient solutions and production sequence for highly effective solar cells that could be used in tandem with crystalline silicon photoactive layers. Due to initial imperfections of perovskite layers, alternative perovskite precursor solution manufacturing …
-
Establishing correlations between molecular precursor coordination and structure, opto-electronic properties, and photovoltaic performance of Cu2ZnSn(S,Se)4 thin-films
… presented in this thesis aims to develop solution-processed Cu2ZnSn(S,Se)4<br/>(CZTSSe) thin-film photovoltaic materials for bifacial solar harvesting applications. To<br/>allow for simultaneous front and rear illumination, the direct deposition of CZTSSe on a<br/>transparent conductive …
Page 1 of 9