Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 89 for “"prepolymer"”.

  1. Future glass factory: precision shaping of glass using amorphous silica nanocomposite prepolymer and replication molding

    … (PDMS) molds as templates. A glass prepolymer is dispensed into these molds, cured using ultraviolet light, and then subjected to thermal debinding and sintering processes. These steps transform the prepolymer into fully fused silica, achieving uniform thickness, minimized shrinkage, …

    qu-belfast Repository record for Future glass factory: precision shaping of glass using amorphous silica nanocomposite prepolymer and replication molding (opens in a new tab) Download PDF for Future glass factory: precision shaping of glass using amorphous silica nanocomposite prepolymer and replication molding (opens in a new tab)

  2. The kinetics and mechanism studies of cathodic electro-initiated crosslinking polymerization of unsaturated polyester prepolymer

    … reaction of the unsaturated polyester prepolymer has been found to have the characteristics of the first order ionic initiation polymerization mechanism. The rate of polymer formation is directly proportional to the current intensity and voltage supplied, but inversely proportional to …

    njit Repository record for The kinetics and mechanism studies of cathodic electro-initiated crosslinking polymerization of unsaturated polyester prepolymer (opens in a new tab)

  3. Development Of A High-Performance Reversible Crosslink Epoxy Composite By Using Diels Alder Chemistry

    … the semi bio-based linear furan grafted epoxy prepolymer was synthesized by step-growth polymerization in a one-pot reaction that enabled control of the prepolymer’s molecular weight using the mono-functional group as the chain stopper. Furthermore, the thermodynamics and kinetics of DA …

    gatech Repository record for Development Of A High-Performance Reversible Crosslink Epoxy Composite By Using Diels Alder Chemistry (opens in a new tab)

  4. Stiklo/stiklo-keramikos mikrodarinių, formuojamų tiesioginio lazerinio rašymo ir atkaitinimo būdu, tyrimas /

    … the sol-gel method the silicon-zirconium based-prepolymer SZXY was prepared with a variety of silicon and zirconium molar ratios respectively X:Y. To examine the effect that a varying zirconium ratio has on the condensation process FTIR-ATR spectra were collected. It is shown that an increase of …

    vilnius Repository record for Stiklo/stiklo-keramikos mikrodarinių, formuojamų tiesioginio lazerinio rašymo ir atkaitinimo būdu, tyrimas / (opens in a new tab)

  5. Structure-property relationship in waterborne poly(urethane urea)s containing small amounts of graphene derivatives of different nature and surface chemistry

    … polyol and the mixture was incorporated during prepolymer formation in the synthesis of the PUDs. The addition of 0.02–0.04 wt.% GO increased the T-peel strength, whereas the addition of 0.05–0.10 wt.% GO increased the single lap-shear strength. The improved adhesion of the PUDs containing GO …

    alicante Repository record for Structure-property relationship in waterborne poly(urethane urea)s containing small amounts of graphene derivatives of different nature and surface chemistry (opens in a new tab)

  6. Controlled polymerization of alkyl vinyl ethers via 'covalent' propagating species

    … and the strategy of amine functionalized prepolymer synthesis. The polymerization reactions show living behavior in nonpolar solvents at low temperatures. The observed rate of polymerization under reaction conditions is linearly dependent on the initial concentration of hydrogen iodide and …

    vt Repository record for Controlled polymerization of alkyl vinyl ethers via 'covalent' propagating species (opens in a new tab)

  7. Synthesis and characterization of lignin-carbohydrate block copolymers

    … (TDI) to form an isocyanate-capped CTA prepolymer under conditions that chain extension is limited and a sufficient NCO equivalent/mole is achieved (ie: 1 or 2). • Reaction in solution of this low DP CTA prepolymer with the HPL block. Films were directly obtained by solution casting of …

    vt Repository record for Synthesis and characterization of lignin-carbohydrate block copolymers (opens in a new tab)

  8. Development of Novel Blends based on Rubber and in-situ Synthesized Polyurethane-urea

    … suggested to synthesize polyurethane-urea via a prepolymer route during blending with rubbers to obtain novel elastomeric materials having extended performance characteristics. The reactive blending process is opted to prepare blends based on nitrile butadiene rubber (NBR) and in-situ synthesized …

    qucosa-diss

  9. Solubility selective membrane materials for carbon dioxide removal from mixtures with light gases

    … oxide) rubbers have been prepared using prepolymer solutions containing: (1) poly(ethylene glycol) diacrylate (PEGDA) and H2O, (2) PEGDA and poly(ethylene glycol) methyl ether acrylate (PEGMEA), and (3) PEGDA and poly(ethylene glycol) acrylate (PEGA). Independent of the prepolymer …

    texas Repository record for Solubility selective membrane materials for carbon dioxide removal from mixtures with light gases (opens in a new tab)

  10. Enzyme Degradable Networks Prepared from a Poly(trimethylene Carbonate)-Peptide Biohybrid

    … (MMP)-sensitive peptide to form a curable prepolymer. These biohybrid formulations were designed to be cured via a simplified one-step cross-linking process by having both the synthetic polymer and the MMP-sensitive peptide components in a single prepolymer. The degradation behavior and the …

    queens Repository record for Enzyme Degradable Networks Prepared from a Poly(trimethylene Carbonate)-Peptide Biohybrid (opens in a new tab)

  11. Surface modifying macromolecules for biomaterials.

    … The SMMs contained a linear polyurethane as the prepolymer component and the prepolymer was end-capped by a fluorinated alcohol. The SMM materials and the blend of these SMMs with the polyester-urea-urethane base polymer were characterized with respect to their bulk and the surface properties, …

    ottawa-retro Repository record for Surface modifying macromolecules for biomaterials. (opens in a new tab)

  12. Characterization of modified polyimide adhesives

    An addition polyisoimide prepolymer was modified through the incorporation of metal particles. The response of this metal/polymer composite to mechanical vibrations and the passage of electric current was measured. Model aluminum conductor bar joints containing this material were assembled and …

    vt Repository record for Characterization of modified polyimide adhesives (opens in a new tab)

  13. Integrated genetic analysis systems

    … system using (3D) hydrogel structures a prepolymer solution containing probe DNA was formulated and introduced into the microfluidic channel. Photo-polymerisation was undertaken forming 3D hydrogel structures attached to the microfluidic channel surface. The prepolymer material, …

    cork Repository record for Integrated genetic analysis systems (opens in a new tab)

  14. Applications of Microstereolithography in Tissue Engineering

    … based on the light induced crosslinking of a prepolymer according to a computer based design. The technology emerged in the 1980’s as a rapid prototyping technique for the fabrication of small parts and devices. The technique has evolved into an important research tool with a diverse range of …

    whiterose Download PDF for Applications of Microstereolithography in Tissue Engineering (opens in a new tab)

  15. Ultra-High Molecular Weight Nonlinear Bisphenol A Polycarbonates by Solid State Polymerization in Micro-Layers

    … (SSP<sub>m</sub>) of low molecular weight prepolymers in presence of LiOH.H<sub>2</sub>O catalyst at a temperature between the glass transition temperature and the melting point. When the prepolymers (14,000 g/mol) in micro-layers of a thickness range from 5 &mu;m to 35 &mu;m were …

    maryland Repository record for Ultra-High Molecular Weight Nonlinear Bisphenol A Polycarbonates by Solid State Polymerization in Micro-Layers (opens in a new tab)

  16. High-energy, curable polycyclopentadiene binder for solid rocket propellants

    … weight M<sub>n</sub> up to 3000. This liquid Prepolymer is curable with maleic anhydride. With ammonium perchlorate, aluminum, and maleic anhydride, a high energy solid propellant has been formulated with this polymer. Via bomb calorimeter, Instron, and density measurement, it was found that …

    njit Repository record for High-energy, curable polycyclopentadiene binder for solid rocket propellants (opens in a new tab)

  17. Filler Reinforced Elastomers Based on Functional Polyolefin Prepolymers

    Carboxy-telechelic polyethylene prepolymers were synthesized by ring-opening metathesis polymerization of 3-ethyl-1-cyclooctene in the presence of maleic acid followed by hydrogenation. Crosslinking of the prepolymer with a tri-functional crosslinker and fumed silica or carbon black filler yielded …

    umn Repository record for Filler Reinforced Elastomers Based on Functional Polyolefin Prepolymers (opens in a new tab)

  18. Ultrafast nonlinear plasmonics

    … nanoantenna effect. In the presence of a prepolymer resin, luminescence generated from the nanostructures can induce polymerization by exciting a photoinitiator. The strong correlation between MAIL and MEMAP is demonstrated by using different excitation wavelengths and different types of …

    maryland Repository record for Ultrafast nonlinear plasmonics (opens in a new tab)

  19. NCO-sP(EO-stat-PO) as functional additive for biomaterials’ development

    … thesis was the application of the functional prepolymer NCO-sP(EO-stat-PO) for the development of new biomaterials. First, the influence of the star-shaped polymers on the mechanical properties of biocements and bone adhesives was investigated. 3-armed star-shaped macromers were used as an …

    wurz-thes Repository record for NCO-sP(EO-stat-PO) as functional additive for biomaterials’ development (opens in a new tab)

Page 1 of 5