Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 216 for “"prepreg"”.
-
Continuous processing of unidirectional prepreg
Thesis (Ph. D.)--Michigan State University. Department of Chemical Engineering, 1990
-
Thermoplastic prepreg manufacture by solution impregnation
… composites are commonly manufactured from "'prepreg" materials, where the reinforcing fibers are preimpregnated with resin. The objectives of this investigation were to identify the critical parameters in impregnation of the fiber tow by a thermoplastic solution, and to produce high quality …
-
Tackiness characterization of thermoset prepreg materials
Defects formation during Automated Fiber Placement (AFP) process is inevitable. So far, various studies have been conducted which look for ways to improve produced sample properties and to limit defects formation. However, there is a lack of comprehensive investigation in this field to provide …
-
Forming simulation of prepreg plain weave fabrics
… work to simulate the behavior of a plain weave prepreg during forming. Namely, a hybrid shell/membrane element is utilized to de-couple the in-plane and out-of-plane properties of the fabric ply. Viscous behavior, orientation- and pressure-dependent inter-ply frictional behavior, as well as the …
-
Simulation engineering of polymeric prepreg composite systems
High performance prepreg systems used in the airplane industry are proprietary and as a result, issues or problems concerning prepreg handling and composite performance have not been understood by the prepreg user and manufacturer. To help eliminate these proprietary concerns, model prepreg systems …
-
Self-healing laminated composites from prepreg fabrics
… Microcapsule-containing unidirectional (UD) prepreg fabrics were developed to uniformly distribute the microcapsules at the fiber interstitial spaces. Self-healing FRP composites were fabricated from the microcapsule-containing prepregs and the healing of fatigue-induced damage was …
-
Gas transport in out-of-autoclave prepreg laminates
Out-of-autoclave (OOA) pre-impregnated (prepreg) materials are a prospective alternative to traditional autoclave processing, with the potential to reduce processing costs and build structures without size limitations imposed by the autoclave. Gas transport pathways in prepreg laminates play an …
-
Process-induced wrinkling and waviness in prepreg charge-forming
Carbon-epoxy prepreg C-channels were charge-formed by drape forming onto an aluminum tool. Flange lengths, forming temperatures, ply counts, ply sequences, forming methods, and curing bag types were varied and related to wrinkling, waviness, termination profiles, thickness profiles, …
-
Thermal rheological analysis of cure process of epoxy prepreg
The cure process of epoxy prepreg used as composite pipe joints was studied by means of differential scanning calorimetry (DSC), Bohlin Rheometer and other techniques. Isothermal DSC measurements were conducted between 110 and 220 oC, at 10 oC intervals. The results show that the complete cure …
-
Powder processing of composite prepreg tape : particle size effects
Thesis (M.S.)--Michigan State University. Department of Chemical Engineering Composite Materials and Structures Center, 1992
-
Experimental study of the pre-gelation behaviour of composite prepreg
… most of the work done on thermoset composite prepreg systems have studied the post –gelation response, leaving the initial condition of the material relatively unexplored. The initial, or pre-gelation, state of the material is becoming increasingly relevant as the industry transitions to new …
-
Behaviour of resin voids in out-of-autoclave prepreg processing
Resin in prepreg contains small bubbles called resin voids. These voids are isolated from the laminate inter-connected breathing network and cannot be removed by vacuum debulk. Initially these voids contribute negligibly to porosity; however, they may grow and contribute significantly to porosity …
-
Void evolution during processing of out-of-autoclave prepreg laminates
Out-of-Autoclave (OOA) prepreg processing is a promising candidate for replacement of autoclave (AC) processing, which is the current standard for manufacturing primary structural parts in the aerospace industry. However, its success is dependent on the ability to produce high quality parts with …
-
Cure kinetics and synthesis of some resins and prepreg systems
… and cure kinetics of some resin and prepreg systems. The first chapter gives an introduction to the research presented in this thesis. A summary of epoxy and amine cure reactions that occur in epoxy resins and prepreg systems, the role of catalyst and studies on the cure kinetics with …
-
Rheological Behavior and Manufacturing Simulation of Prepreg Platelet Molding Systems
Molding systems formed by cutting and slitting prepreg composite tape into the form of platelets have been shown to be beneficial in producing parts with moderate performance with moderate processing characteristics. However, the platelets forming the molding system are typically quite large …
-
Mesostructure Reconstruction of Prepreg Platelet Molded Composite With Artificial Intelligence
Prepreg platelet molded composites (PPMC) are long, discontinuous fiber reinforced polymer materials. PPMC are an important subcategory of composite materials as they are processible into geometrically complex structures and can be produced via high-throughput manufacturing processes, however they …
-
Processing of post-industrial unidirectional prepreg tapes using SMC equipment
… with waste, unused carbon fiber unidirectional prepreg tapes. One idea is to repurpose unused prepreg tapes for the manufacture of sheet-molding compound (SMC). The resulting material, per Sultana [1], should be stronger due to their carbon fiber and high strength epoxy resin, as compared to …
-
Gas transport and water vapourization in out-of-autoclave prepreg laminates
… have led to the development of pre-impregnated (prepreg) composites that are designed to be cured out-of-autoclave (OOA) and can potentially reduce the costs of processing. In OOA processing, voids are removed by vacuum evacuation through gas pathways in the prepreg. The availability and …
Page 1 of 11