Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 69 for “"prepregs"”.

  1. Gas transport and void evolution in composite prepregs

    Out-of-autoclave (OOA) processing of prepregs represents a promising low cost alternative to expensive autoclave processing, which today is the standard method for producing high-quality CFRP parts such as aerospace structures; however, OOA processes have a greater potential to experience problems …

    ubc Repository record for Gas transport and void evolution in composite prepregs (opens in a new tab) Download PDF for Gas transport and void evolution in composite prepregs (opens in a new tab)

  2. Compaction and Cure of Resin Film Infusion Prepregs

    … to describe the cure and consolidation of prepregs used for resin film infusion. Resin kinetics, rheology, flow and fiber deformation are considered. Resin kinetics are simulated with an isothermal autocatalytic-1 type relation. The non-Newtonian viscosity of the Cytec™ 754 resin is …

    vt Repository record for Compaction and Cure of Resin Film Infusion Prepregs (opens in a new tab)

  3. Modeling of Formability and Drapeability of Continuous Fiber Thermoset Prepregs

    Carbon fiber reinforced plastic (CFRP) is a popular choice for structural materials in the aerospace industry. Its superior strength to weight ratio is instrumental to light-weighting the airframe, therefore improving the fuel efficiency of the aircraft. As the aerospace industry applies increased …

    gatech Repository record for Modeling of Formability and Drapeability of Continuous Fiber Thermoset Prepregs (opens in a new tab)

  4. Bending Behavior of Textile Thermosetting Composite Prepregs during Forming Processes

    … of the deformation behavior of textile-woven prepregs is required. Out-of-plane bending is one of the deformation mechanisms that govern the appearance of wrinkles during composite forming. This thesis therefore presents an experimental, theoretical, and numerical study on the out-of-plane …

    concordia Download PDF for Bending Behavior of Textile Thermosetting Composite Prepregs during Forming Processes (opens in a new tab)

  5. Development of Carbon-Nanotube based Nanoforest Derivatives for Manufacturing and Testing of Polymer Nanocomposite Prepregs, Film Stacking, and Powder Processing

    … high-temperature polymeric polyimide composite Prepregs such as Carbon/RM-1100 and Carbon/AFR-PE-4 prepreg systems has been established and employed in this research to manufacture high-performance composite materials. Several methods were optimized including: substrate preparation, CVD water …

    hawaii Repository record for Development of Carbon-Nanotube based Nanoforest Derivatives for Manufacturing and Testing of Polymer Nanocomposite Prepregs, Film Stacking, and Powder Processing (opens in a new tab)

  6. Production of aligned short-fibre composites

    … substrate to produce aligned short-fibre prepregs. Experimental methods were developed to address issues associated with calibration, a blade inspection criteria and the optimisation of producing parameters to achieve at least 60% fibre alignment in the prepreg. In order to ensure that the …

    birmingham Download PDF for Production of aligned short-fibre composites (opens in a new tab)

  7. Process-property relation of prepreg trim waste composites via sheet molding compound (SMC)

    … SMC line was engineered to process the CF prepregs by developing prepreg spool holding system, guiding systems for prepreg tapes, spool-core to shaft friction reduction system, and by introducing the venturi equipment for removing backup film of tapes. Since cutting and SMC preparation of …

    gatech Repository record for Process-property relation of prepreg trim waste composites via sheet molding compound (SMC) (opens in a new tab)

  8. EXPERIMENTAL AND NUMERICAL INVESTIGATION ON THE FRACTURING BEHAVIOR AND SCALING OF DISCONTINUOUS FIBER COMPOSITE STRUCTURES

    … and deposited platelets or chips made of prepregs. Because they contain fiber volume fractions similar to their pristine prepregs, they possess similar stiffness compared to the quasi-isotropic laminate made of identical prepregs. They are a suitable material form to be used for complex …

    washington Repository record for EXPERIMENTAL AND NUMERICAL INVESTIGATION ON THE FRACTURING BEHAVIOR AND SCALING OF DISCONTINUOUS FIBER COMPOSITE STRUCTURES (opens in a new tab)

  9. The Synergistic Effects of Prepreg Humidity Exposure, Fabrication Pressure, and Hydraulic Fluid Absorption on Microstructure and Mechanical Properties of High-Performance Composite Laminates

    … laminates. Three high-performance commercial prepregs, including quartz/Bismaleimide, quartz/epoxy, and carbon/epoxy, that are commonly used in aerospace applications were included in this research study. To alter the moisture content of composite prepregs, prepreg sheets were exposed to four …

    oklahoma-thes Repository record for The Synergistic Effects of Prepreg Humidity Exposure, Fabrication Pressure, and Hydraulic Fluid Absorption on Microstructure and Mechanical Properties of High-Performance Composite Laminates (opens in a new tab)

  10. An analysis for the blade coating of CTBN modified epoxy adhesive

    … criterion has been developed for processing the prepregs of CTBN-EPOXY resin in which the resin content can be controlled within close tolerances. This criterion was obtained by numerically simulating the flow of CTBN-EPDXY resin in the blade-type metering device at room temperature. The …

    njit Repository record for An analysis for the blade coating of CTBN modified epoxy adhesive (opens in a new tab)

  11. An exploration of vehicle health monitoring and non-destructive testing technologies for highspeed aircraft

    … 6, reviewing methods for uncured polymer matrix prepregs and underscoring the need for quantifiable approaches in high-speed aircraft. Chapter 7 investigates acousto-ultrasonic methods for monitoring environmentally exposed uncured prepregs, finding a correlation between this technique and …

    unsw Repository record for An exploration of vehicle health monitoring and non-destructive testing technologies for highspeed aircraft (opens in a new tab)

  12. Thermoplastic composite consolidation

    … of high-quality composites from thennoplastic prepregs requires careful selection of the processing cycles so that intimate contact at the ply interfaces is achieved resulting in the formation of strong interply bonds and the process-induced residual stress is minimized to ensure superior …

    vt Repository record for Thermoplastic composite consolidation (opens in a new tab)

  13. Beitrag zur Herstellung langfaserverstärkter Aluminium-Matrix-Verbundwerkstoffe durch Anwendung der Prepregtechnik

    … der Prozessparameter auf die Struktur der Prepregs und der verdichteten MMC`s zu erfassen und zu bewerten. In Kenntnis dieser Zusammenhänge sind die qualitätsrelevanten Kennwerte der Werkstoffstruktur denen der mechanischen Eigenschaften gegenüberzustellen. In Weiterführung der o.g. …

    qucosa-diss

  14. The Inter-Laminar Shearing Effect on Wrinkle Development in Composite Forming Processes

    … plain weaves (PW), and eight harness satin (8HS) prepregs which showed that intra-laminar shearing was a factor in the wrinkling. The 8HS laminate formed without wrinkles while the PW laminate had smaller wrinkles than the tape laminate which followed the trend of drapability of individual plies. …

    wustl Repository record for The Inter-Laminar Shearing Effect on Wrinkle Development in Composite Forming Processes (opens in a new tab)

  15. Manufacture and characterisation of natural fibre thermoplastic composite tapes

    … have been developed to manufacture flax/PLA prepregs. Testing plates were manufactured from these prepregs using compression moulding. It was found that the tensile properties of the plates matched or exceeded those found in the literature. To replace manufacturing steps that were not …

    auckland-ms Repository record for Manufacture and characterisation of natural fibre thermoplastic composite tapes (opens in a new tab)

  16. Characterization of Cure Kinetics and Physical Properties of a High Performance, Glass Fiber-Reinforced Epoxy Prepreg and a Novel Fluorine-Modified, Amine-Cured Commercial Epoxy.

    … of processing parameters in the processing of prepregs. Shrinkage due to both resin consolidation and fiber rearrangement is measured as the linear expansion of the piston on a quartz dilatometry cell using TMA. The shrinkage of prepregs was determined to depend on the curing temperature, …

    unt Repository record for Characterization of Cure Kinetics and Physical Properties of a High Performance, Glass Fiber-Reinforced Epoxy Prepreg and a Novel Fluorine-Modified, Amine-Cured Commercial Epoxy. (opens in a new tab)

  17. Exploring the Capabilities of Carbon Fibre-Reinforced Polymer Composites to Act as Solvent-Induced Actuators

    … composites by creating a series of fibrous prepregs via solvent casting, assembling prepregs into [0x/90y] lay-up sequences, and hot-pressing the assemblies, testing the manufactured composites in various fluids, and establishing theoretical models to predict the extent of composites' …

    bristol Repository record for Exploring the Capabilities of Carbon Fibre-Reinforced Polymer Composites to Act as Solvent-Induced Actuators (opens in a new tab) Download PDF for Exploring the Capabilities of Carbon Fibre-Reinforced Polymer Composites to Act as Solvent-Induced Actuators (opens in a new tab)

  18. Thermal insulation by heat resistant polymers

    … load. A new type of insulation material using prepregs was developed for the first time. This consists of the development of the prepregs and their assembly to make insulant laminates. This laminate has been shown to exhibit better physical, mechanical, thermal and ablative properties than a …

    concordia Download PDF for Thermal insulation by heat resistant polymers (opens in a new tab)

Page 1 of 4