Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 33 for “"pressure regulator"”.

  1. An investigation of venturi type air-fuel mixers for gaseous fuelled engines

    … of air-fuel mixers was examined, and values of pressure drop across the mixer were determined for six different configurations. The overall conclusion is that it should be possible to construct venturi air-fuel mixers which supply the engine with a stoichiometric air-fuel mixture, provided that …

    ubc Repository record for An investigation of venturi type air-fuel mixers for gaseous fuelled engines (opens in a new tab) Download PDF for An investigation of venturi type air-fuel mixers for gaseous fuelled engines (opens in a new tab)

  2. At-rest and compaction-induced lateral earth pressures of moist soils

    … at-rest and compaction-induced earth pressures in moist soils. The device has a split oedometer ring, and horizontal stresses are measured using load cells which support one half of the ring. Rapid cyclic loading was applied to compacted soil specimens, using a digital pressure …

    vt Repository record for At-rest and compaction-induced lateral earth pressures of moist soils (opens in a new tab)

  3. Effects of wettable-power herbicides on agitation devices and wear of sprayer components

    … chosen for study were the nozzle, pump, pressure regulator valve, and agitation system.</p> <p>The objectives of the study were to determine:</p> <p>1. The effects of the abrasive action of wettable-powder solutions within normal field application rates on components of low-volume …

    ut-knoxville Repository record for Effects of wettable-power herbicides on agitation devices and wear of sprayer components (opens in a new tab)

  4. A spatial modeling tool for agricultural systems

    … three systems - surface water over a landform, pressure distribution in the cross section of a dam, and the performance of an irrigation pressure regulator. Other applications are suggested and program refinements proposed.</p>

    ut-knoxville Repository record for A spatial modeling tool for agricultural systems (opens in a new tab)

  5. Multiphase Flow Behavior in Venturi Aspirator Systems

    … systems, with a focus on the role of back pressure. The study begins with single-phase experiments to establish baseline system performance which provided key insights into pressure losses and head-flow relationships. Following this, multiphase flow experiments were conducted using both a …

    carleton Repository record for Multiphase Flow Behavior in Venturi Aspirator Systems (opens in a new tab)

  6. Design and Implementation of a Modular, Standalone Microfluidic Flow Control Platform for Cell Culture Applications

    … pneumatic pump that features a 3D-printed micro-pressure regulator (µPR) to address the demand for an accessible, plug-and-play flow control platform (valving and pumping). Valves for microfluidics are typically achieved via commercial check valves, which often suffer from leakage flows when …

    rit Repository record for Design and Implementation of a Modular, Standalone Microfluidic Flow Control Platform for Cell Culture Applications (opens in a new tab)

  7. Conversion of gasoline Saturn SL-1 to dedicated compressed natural gas use

    … gas tank with brackets; valves, tubing, a pressure regulator, fuel injectors, and other components to create a fuel delivery system. Engine conversion involves substitution of original pistons with "flat-top" pistons, raising the compression ratio to 11.0:1.</p> <p>An aftermarket electronic …

    ut-knoxville Repository record for Conversion of gasoline Saturn SL-1 to dedicated compressed natural gas use (opens in a new tab)

  8. A device for the treatment of adult Sleep Apnea Syndrome

    … pump has been employed in order to eliminate the pressure regulator and accompanying noise of present therapeutic devices. The positive-displacement pump is found to quietly and effectively provide the required airway pressures for the treatment of adult Sleep Apnea Syndrome. New developments in …

    vt Repository record for A device for the treatment of adult Sleep Apnea Syndrome (opens in a new tab)

  9. Sensitivity of Combustion Liner Contour to Sand Ingestion Clogging

    … controlled using a sonic orifice downstream of a pressure regulator so that the mass flow rate of the air and sand mixture is independent of the clogging state. Pressure data upstream of a small section of a combustion liner was recorded to quantify the clogging of the different combustion liner …

    ucf Repository record for Sensitivity of Combustion Liner Contour to Sand Ingestion Clogging (opens in a new tab)

  10. Matrix Acidizing Parallel Core Flooding Apparatus

    … overburden pump, injection pump, accumulator, pressure sensors, and a back pressure regulator. Results from matrix acidizing core flooding in laboratory conditions provide an understand for wormhole growth, acid diversion, injection rates, and adds a variety of liquid chemicals for testing at …

    tamu Repository record for Matrix Acidizing Parallel Core Flooding Apparatus (opens in a new tab)

  11. Optimal control of an axial piston pump using single-stage and two-stage electrohydraulic servovalves

    … of optimal control theory to the design of a pressure regulator for an axial piston pump and single-stage electrohydraulic valve combination; in addition, a two-stage electrohydraulic valve was used in combination with the pump. Modeling has been accomplished for these valve systems and …

    iastate Repository record for Optimal control of an axial piston pump using single-stage and two-stage electrohydraulic servovalves (opens in a new tab)

  12. Feasibility of AquasolveTM HPMC-AS Lg via Hot-melt Extrusion: Effect of Pressurized CO2 on Physico-mechanical Properties

    … into eight zone of extruder using a high-pressure regulator connected to flexible stainless-steel hose with armor casing. The thermal characterization of extrudates was obtained by using differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). A scanning electron …

    mississippi Repository record for Feasibility of AquasolveTM HPMC-AS Lg via Hot-melt Extrusion: Effect of Pressurized CO2 on Physico-mechanical Properties (opens in a new tab)

  13. Development of a novel device for hemostatic powder delivery treating gastrointestinal bleedings

    … a catheter and into a sealed container. A pressure regulator regulates the maximum pressure of the system at 68 kPa (10 psi), while the flow rate is adjusted using a gas flow regulator. Three different flow rates are examined in the experimental part of this work: 0.37 m³/h, 0.31 m³/h, and …

    ubc Repository record for Development of a novel device for hemostatic powder delivery treating gastrointestinal bleedings (opens in a new tab) Download PDF for Development of a novel device for hemostatic powder delivery treating gastrointestinal bleedings (opens in a new tab)

  14. Characterization and modelling of an open cycle CO2 transport Refrigeration system

    … and refrigerant temperatures, the refrigerant pressures, the mass flow rate of CO2 and the cooling capacity of the system. A method of measuring the two-phase zone length within the evaporator coil with temperature measurements along the length of the coil is presented. The utility and …

    dcu Download PDF for Characterization and modelling of an open cycle CO2 transport Refrigeration system (opens in a new tab)

  15. Development and mathematical analysis of a modular CNG valve : a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering, Mechatronics, at Massey University

    … speed and load range using the conventional zero pressure regulator and mixer combination gas conversion equipment used previously for carburetted engines. This problem is completely eliminated with gas injection system. The Harrison CNG Electronic Gas injection System control valve is a linear …

    massey Repository record for Development and mathematical analysis of a modular CNG valve : a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering, Mechatronics, at Massey University (opens in a new tab)

  16. Three-staged turbocharger modeling with passive control system.

    … well-behaved as the RPM reduces to zero or the pressure ratio approaches unity. The accuracy of the models has been tested by comparing the calculated dependent variables with their measured counterparts. Subsequently, an iterative solution was developed to calculate the operating points at all …

    wvu Repository record for Three-staged turbocharger modeling with passive control system. (opens in a new tab)

  17. Matrix Acidizing Core Flooding Apparatus: Equipment and Procedure Description

    … down the wellbore below formation fracture pressure to dissolve carbonate (CaCO3) rock creating high permeability streaks called wormholes. The main components of the apparatus include a continuous flow syringe pump, three core holders, a hydraulic hand pump, two accumulators, a back …

    tamu Repository record for Matrix Acidizing Core Flooding Apparatus: Equipment and Procedure Description (opens in a new tab)

  18. Effect of Nozzle Pressure Ratio on Thrust and Flow Behavior in a Supersonic De Laval Nozzle

    … In overexpanded regime, where the exit pressure is lower than the ambient pressure, shock-induced separation may occur within the divergent section of the nozzle, potentially degrading nozzle performance. Understanding the aerodynamic behavior of nozzles operating under off-design …

    embry-riddle Repository record for Effect of Nozzle Pressure Ratio on Thrust and Flow Behavior in a Supersonic De Laval Nozzle (opens in a new tab)

  19. Design and Implementation of a Clutch and Brake System for a Single Wheel Indoor Tire Testing Rig

    … system consisting of pneumatic lines, the pressure regulator, valves, etc., have to be installed. Easy operation of the clutch from a remote location is enabled through the installation of a solenoid valve. The second part of this work is to design, fabricate, and install a braking system. …

    vt Repository record for Design and Implementation of a Clutch and Brake System for a Single Wheel Indoor Tire Testing Rig (opens in a new tab)

Page 1 of 2