Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 39 for “"print head"”.

  1. Electrohydrodynamic jet printing: advancements in manufacturing applications

    Electrohydrodynamic jet printing offers advantages such as high resolution over more traditional manufacturing printing techniques, but lacks in the high throughput that is demanded by industry. At the University of Illinois at Urbana-Champaign, UIUC, a high resolution technique for printing was …

    uiuc Repository record for Electrohydrodynamic jet printing: advancements in manufacturing applications (opens in a new tab)

  2. Development of low cost inkjet 3D printing for the automotive industry : a thesis presented in partial fulfilment of the requirements for a degree of Master of Engineering in Mechatronics, Massey University, Albany, New Zealand

    … is to develop a low cost, powder based 3D printer that utilises inkjet printing technology. The 3D printer uses a standard drop-on-demand inkjet print head to deposit a binder onto the powder bed one layer at a time to build the desired object. Existing commercial 3D printers that use …

    massey Repository record for Development of low cost inkjet 3D printing for the automotive industry : a thesis presented in partial fulfilment of the requirements for a degree of Master of Engineering in Mechatronics, Massey University, Albany, New Zealand (opens in a new tab)

  3. Development and Characterization of Multi-Material Printing of the Drop-on-Demand (DoD) System

    … Demand (DoD) dispensing, using different type of print heads with different methods of actuation within a single dispensing system. Other than compatibility issues and the necessary modifications to the hardware and software of an original DoD system, much considerations are also given to the …

    nus Repository record for Development and Characterization of Multi-Material Printing of the Drop-on-Demand (DoD) System (opens in a new tab) Download file for Development and Characterization of Multi-Material Printing of the Drop-on-Demand (DoD) System (opens in a new tab)

  4. EVALUATION OF A ROTATING PRINTER HEAD FOR ADDITIVE MANUFACTURING AT VARIABLE RESOLUTION

    … methods typically require a trade-off between print resolution and mass deposition rates due to a set nozzle size. This requires longer build times for large, highly detailed parts and it would be beneficial to be able to change the resolution on the fly for naval applications. Having a print …

    nps Repository record for EVALUATION OF A ROTATING PRINTER HEAD FOR ADDITIVE MANUFACTURING AT VARIABLE RESOLUTION (opens in a new tab)

  5. Towards All-Printed Lateral Flow Biosensors

    … developing a method wherein the whole device is printed directly, including the printable substrates, as well as by developing a clog-free process for depositing expensive reagents. These novel printable porous media were developed using printing inks that contained various pigments and polymer …

    mcmaster Repository record for Towards All-Printed Lateral Flow Biosensors (opens in a new tab)

  6. INKJET PRINTING: FACING CHALLENGES AND ITS NEW APPLICATIONS IN COATING INDUSTRY

    … the most important issues for advancing inkjet printing for possible application in the coating industry with a focus on piezoelectric droplet on demand (DOD) inkjet technology. Current problems, as embodied in liquid filament breakup along with satellite droplet formation and reduction in …

    uky-thes Repository record for INKJET PRINTING: FACING CHALLENGES AND ITS NEW APPLICATIONS IN COATING INDUSTRY (opens in a new tab)

  7. Design and fabrication of multimaterial electrohydrodynamic-jet deposition system

    Electrohydrodynamic jet (E-jet) printing has emerged as a high resolution alternative to other forms of direct solution-based fabrication approaches, such as ink-jet printing. This thesis discusses the design, integration and operation of a unique E-jet printing platform. The uniqueness lies in the …

    uiuc Repository record for Design and fabrication of multimaterial electrohydrodynamic-jet deposition system (opens in a new tab)

  8. 3D Printing Support-less Engineered Lattice Structures via Jetting of Molten Aluminum Droplets

    … the possibility of using such a method to print engineered lattice structures without the aid of any support material. It was determined through experiments that by carefully controlling the droplet jetting frequency, the droplet step-over distance, and the stand-off distance between the …

    rit Repository record for 3D Printing Support-less Engineered Lattice Structures via Jetting of Molten Aluminum Droplets (opens in a new tab)

  9. Analysis and Computational Modelling of Drop Formation for Piezo-Actuated DOD Micro-Dispenser

    … has been dramatically used in inkjet printing rapid prototyping applications. To predict the drop size, its velocity and shape evolution, it is necessary to understand the drop formation process. In this thesis, an analytical method is used to analyze the oscillatory fluid movement …

    nus Repository record for Analysis and Computational Modelling of Drop Formation for Piezo-Actuated DOD Micro-Dispenser (opens in a new tab) Download file for Analysis and Computational Modelling of Drop Formation for Piezo-Actuated DOD Micro-Dispenser (opens in a new tab)

  10. Design and testing of a feedback position control system using extremely low pressure air

    … control system for reducing the gap between the printing head of an Inkjet printer and the paper. Because of variation of paper thickness (i.e. envelopes) and deformations of structural members the print head is positioned further from the paper than desired (approximately 0.8 mm). Evaluation of …

    ut-knoxville Repository record for Design and testing of a feedback position control system using extremely low pressure air (opens in a new tab)

  11. 3D spausdinių stipruminių savybių tyrimas /

    3D printer is a device that converts physical images (drawings). Main components: housing, engines, the 3 coordinate axes (x, y, z), the control unit and the print head (the plastic extruder) with the heating element [7]. The aim of the work is to compare the design of a 3D printer assembled in …

    vilnius Repository record for 3D spausdinių stipruminių savybių tyrimas / (opens in a new tab)

  12. Novel Method for Additive Manufacture of Rubber with Exploration in Support Structure and Material Performance

    3D printing is a rapidly growing additive manufacturing process that offers advantages in customizability, sustainability, cost reduction, precision, and accessibility over traditional processes. The limitation of printable materials, however, is still a major barrier preventing 3D printing moving …

    oregon Repository record for Novel Method for Additive Manufacture of Rubber with Exploration in Support Structure and Material Performance (opens in a new tab)

  13. Development of a Graphic User Interface Based on OpenGL for a Drop-on-Demand Micro/Bio Fabrication System

    … used manufacturing technologies nowadays, inkjet printing technology is being developed and improved in a rapid speed in order to meet the progressively higher requirement and development in manufacturing and fabrication demands. With competitive advantages of the precisely delivered drop volume …

    nus Repository record for Development of a Graphic User Interface Based on OpenGL for a Drop-on-Demand Micro/Bio Fabrication System (opens in a new tab) Download file for Development of a Graphic User Interface Based on OpenGL for a Drop-on-Demand Micro/Bio Fabrication System (opens in a new tab)

  14. Process Planning for Concurrent Multi-nozzle 3D Printing

    … is the low material deposition rate during printing. Increasing the material deposition rate by increasing the layer thickness or utilizing larger diameter nozzles results in deterioration of the surface quality of the part. This is known as the “staircase effect”; thus there is a trade-off …

    rit Repository record for Process Planning for Concurrent Multi-nozzle 3D Printing (opens in a new tab)

  15. Design of a Compaction-Assisted Binder Jetting Machine

    … a liquid binder is repeatedly deposited by a printhead onto a thin layer of powder particles to produce components. This technology has gained significant attention due to its potential for low-cost production and its applicability in various industries including electronics, automotive, and …

    tamu Repository record for Design of a Compaction-Assisted Binder Jetting Machine (opens in a new tab)

  16. INVESTIGATION OF THE USE OF 3-D PRINTER PLATFORM AS BUILDING BLOCK FOR RAPID DESIGN OF RESEARCH AND MANUFACTURING TOOL

    … thesis attempts to show how an open source 3-D printer platform, the self replicating rapid prototype (RepRap), could be used to accelerate the development of research and manufacturing tools. Two projects are shown as examples, both utilizing components of the 3-D printer platform. The first …

    mtu Repository record for INVESTIGATION OF THE USE OF 3-D PRINTER PLATFORM AS BUILDING BLOCK FOR RAPID DESIGN OF RESEARCH AND MANUFACTURING TOOL (opens in a new tab)

  17. Pagaminto 3D spausdintuvo skirtumai nuo esamų konstrukcijų ir jo parametrų tyrimas /

    Superior modern printers, robots, and other daily use of our technology is sophisticated and highly precise structures, products which are not only at home, work, courtyards, but for the planet Earth. Older people are aware of the concept of “printers“, that is a device that can print images and …

    vilnius Repository record for Pagaminto 3D spausdintuvo skirtumai nuo esamų konstrukcijų ir jo parametrų tyrimas / (opens in a new tab)

  18. Nano-composite material development for 3-D printers

    … materials for a broad range of applications. 3-D printing has also seen vast improvements in recent years that have allowed many companies and individuals to realize rapid prototyping for relatively low capital investment. This research sought to create a graphene reinforced, polymer matrix …

    ttu Repository record for Nano-composite material development for 3-D printers (opens in a new tab)

  19. Magnetic nanoparticle inks for syringe printable inductors

    … with a single apparatus by exchanging the printable material at the print head. Iron cobalt (FeCo), permalloy (Ni80Fe20), and iron (II,III) oxide (Fe2O3·FeO) nanoparticles with varying magnetic properties were incorporated in resins to explore the influence of particle loading on …

    maryland Repository record for Magnetic nanoparticle inks for syringe printable inductors (opens in a new tab)

Page 1 of 2