Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 56 for “"pseudoelastic"”.
-
Localization instabilities in pseudoelastic NiTi tubes under multiaxial stress states
… equiatomic NiTi has a unique property called pseudoelasticity in that strain of several percent is recoverable at room temperatures. This characteristic is attainable due to solid-state transformations between the austenite and martensite phases. It is well established that the transformation …
-
Constitutive modeling and numerical studies of pseudoelastic shape memory alloys
Shape memory alloys posses unique pseudoelastic character that allows it to fully recover to relatively large deformation. This outstanding material property enables their wide applications in industries ranging from aerospace structures to medical devices. Hence, it is of great interest to have an …
-
Constitutive modeling of pseudoelastic NiTi and its application to structural problems
… NiTi exhibits the unique characteristic of pseudoelasticity, i.e. it can be deformed to strain levels of several percent that is fully recoverable on unloading. Under tension, the phase transformation results in strain of nearly 7% and inhomogeneous deformation while the stress remains …
-
Pseudoelastic deformation of shape memory annular plates subject to normal tractions
Thesis (Ph. D.)--Michigan State University. Department of Mechanical Engineering, 2005
-
On the thermomechanics of localizing pseudoelastic transformations in NiTi materials and structures
… are recovered during the reverse transformation (pseudoelasticity). In a structure, the transformations occur inhomogeneously with two deformation regimes coexisting, separated by sharp fronts. Moreover, latent heat is released/absorbed at the fronts causing temperature gradients which can affect …
-
Extraction of the underlying material response of pseudoelastic NiTi and its application in numerical simulations
In certain temperature regimes NiTi exhibits pseudoelasticity, meaning that after being loaded to strains of 6-7% it can return to its original configuration. This behavior is produced by the reversible solid-state phase transformation between the austenitic (A) and martensitic (M) phases. During …
-
Stress Analysis and Fatigue Life Prediction of Pseudoelastic NiTi Shape Memory Alloy Tapered Stress Joint via Finite Element Method
… oil. In this paper, the TSJ applying the pseudoelastic effect of Shape Memory Alloys (SMAs) is proposed to reduce the stress concentration at the hang-off point, thereby increase the fatigue life of the TSJ and allowing the TSJ to survive extremely large rotations due to storms, …
-
Pseudoelasticity and Shape Memory Effect in Single Crystal Fe<sub>3</sub>Al
… phenomenon like yield stress anomaly and pseudoelasticity. Mechanical behavior and diffraction studies on the pseudoelastic aspect of Fe<sub>3</sub>Al have been presented in this work.</p> <p>Single crystalline, <em>D</em>0<sub>3</sub> ordered Fe<sub>3</sub>Al is known to show …
-
Changes in the mechanical behavior of Nitinol following variations of heat treatment duration and temperature
… martensite transformation stress resulting in a pseudoelastic response. Increasing to a high treatment power further decreases the transformation stress and increases the martensite transformation temperature leading to a shape-memory response in hot rolled Nitinol. When using cold-drawn Nitinol, …
-
Pseudoelasticity and the strain memory effect in Cu-Zn-Sn
An investigation of pseudoelasticity and the strain memory effect was carried out on the β’-bcc phase of alloy of composition Cu-33Zn-3.4Sn. Pseudoelasticity was found to occur by a stress-induced, martensite transformation. Maximum pseudoelasticity occurred at the Af temperature and was ~8% for …
-
Grain refinement in β-CuAlNi strain memory alloys
… for most specimens in both the strain memory and pseudoelastic states showed a three-stage characteristic with a region of lower slope between two regions of higher modulus. It was found the σ, (the transition stress between stages 1 and 2) and dσ/dε (the slope of stage 2) increased with grain …
-
Constitutive modeling and finite element analysis of the dynamic behavior of shape memory alloys
… experimental observations have shown that the pseudoelastic response of NiTi shape memory alloys (SMA) is localized in nature and proceeds through nucleation and propagation of localized deformation bands. It has also been observed that the mechanical response of SMAs is strongly affected by …
-
Shape memory effect characterization of modified beta-brass alloys
… at various temperatures to investigate the pseudoelastic and memory properties of the alloys. The effects of thermomechanical cycling, and prestrain on the beta-brass alloys are determined. A stress-strain relationship for the alloys at various test temperatures is developed.
-
Fabrication and Evaluation of Multiple Memory Nitinol Stents for Biomedical Applications
… [2]. The unique properties of nitinol such as pseudoelasticity, shape memory, excellent biocompatibility, and corrosion resistance, make it a highly desirable material for fabrication of stents. The superelastic properties of nitinol stents allow good self-expansion ratio and uniform radial …
-
Effects of thermo-mechanical treatment on the shape memory behavior of NiTi and CoNiAl alloys
… texture formation, and increase in strength and pseudoelastic strain are the main findings of this study. Co-32.9 at% Ni-29.5 at% Al is a newly found ferromagnetic alloy. Its low density, high melting temperature and cheap constituents make the alloy advantageous among other shape memory alloys. …
-
Molecular dynamics simulation studies of surface-stress effects in metallic nanostructures
… structural transformations and pseudoelastic behavior in palladium (Pd) crystalline nanowires. For a <100> initial crystal orientation our studies indicate that the surface stress can cause Pd nanowires to spontaneously undergo structural changes with characteristics that are …
-
Synchrotron Radiation X-Ray Diffraction of Nickel-Titanium Shape Memory Alloy Wires During Mechanical Deformation
… shape memory effect (martensitic condition) and pseudoelasticity (austenitic condition) properties depends on various heat treatment conditions. The reason for these properties depends on phase transformation through temperature changes or applied stress. Many technological applications of …
-
Finite Element Analysis Investigating the Sliding Contact of a Shape Memory Alloy Substrate
… shape memory alloys has been attributed to its pseudoelasticity and high yield strength. To date however, an extensive computational study that simulates the contact behavior of these alloys during a typical sliding wear process has not been investigated. This study uses the finite element …
-
Properties of ultra fine grain [beta]-CuAlNi strain memory alloys
… of the specimens in both the strain memory and pseudoelastic states. It was found that the ultimate tensile strength and strain to failure increased with decreasing grain size according to a Hall-Petch relationship down to a grain size of 5µm with the exception of one alloy. Fracture strengths …
Page 1 of 3