Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 27 for “"pull-off force"”.
-
Study of dynamic effects in microparticle adhesion using Atomic force microscopy
… humidity, fluid medium etc. that affect pull-off of particles from surfaces. In particle removal from surfaces using fluid motion, the dynamic effects of particle separation will play an important role. Thus it is essential to study the dynamic effects of particle removal. Velocity of …
-
Rough Surface Interactions of Micro/nano-Scale Contact Systems
… experimental measurements of dynamic interactive forces such as pull-in and pull-off force have been performed using a newly developed instrument, where two piezo-electric actuators were used to control normal and tangential motions of the contacting bodies and the interactive forces were measured …
-
Interaction and adhesion forces between polystyrene spheres and flat mica substrates
<p>An atomic force microscope has been used to measure the interaction and adhesion forces between a polystyrene particle and a mica surface in aqueous solutions. The interaction and adhesive pull-off forces, as well as particle deformation, have been measured as a function of contact force and …
-
Fabrication and characterization of biomimetic dry adhesives supported by foam backing material
… using the same material. Dependencies of the pull-off adhesive force and energy release rate on preload and foam thickness are systematically investigated through a series of axisymmetric indentation/de-bonding tests. The contribution of the foam backing layer to the overall compliance and …
-
Effect of Gingival Margin Design on Retention of Thermoformed Orthodontic Aligners
… A Universal Testing Machine was used to pull each aligner off of a Kilgore dentoform in a direction perpendicular to the occlusal plane. The force needed to pull each aligner off of the dentoform was recorded as the retentive force of the aligner. A one way ANOVA with a Post Hoc …
-
On the Cutting of Metals at the Small Scale: Size Effect, Friction and Plastic Instabilities
… effects. Based on the measurements of cutting forces and specific energies with multiple metallic systems (copper, zinc, polycrystalline and single crystal aluminum), new evidence is presented in sup-port of tool-chip friction as the primary source of the size effect. It is shown that size …
-
Friction and Adhesion of Atomically Thin Films: A Study of Few-layer Graphene
… results, showed a slight increase in the pull-off force as layer number increased. In addition, it was revealed that the layer-dependent pull-off forces result from the increasing tipgraphene interactions. This work contributes to gaining better insight on the applications to the …
-
Mems atomic force microscope
… development, and testing MEMS based Atomic Force Microscope (AFM). The system is capable of measuring the pull-off force measurements on different surfaces. The design is capable of producing a verticalresolution of ~ 2nm. The MEMS AFM consists of a stand-alone optical head, stepper motor …
-
Modeling and Characterization of Viscoporoelastic Behavior and Rate-Dependent Adhesion in Gels
… solution, an experimental approach using atomic force microscope is applied to determine the material parameters of polyacrylamide-alginate hydrogels, validating the methodology. Additionally, this thesis examines rate-dependent adhesion during indentation tests on polyacrylamide hydrogels, …
-
Atomic Force Microscopy Adhesion Measurements Between Soft Polymeric Materials
… adhesion at a variety of interfaces. Atomic force microscopy (AFM) enables the measurement of adhesion at the nano-/microscale due to its high accuracy in force detection and lateral position sensitivity. Polymers are a suitable substrate for studying adhesion peculiarities due to their …
-
Adhesion With Slender Structures: Tape Loops, Crumples, and Origami
… device In the closed state the device had a high pull off force, and in the open state a different style of peel off occurred, lowering the peak force. We present promising results that show this to be the case.
-
Clips and brackets. Assembly & Disassembly Force
… This research is focused on simulating the forces needed to assembly and disassembly the fuel lines into the clip all around the fuel system, since the actual verification method is the real test made after its manufacture. In order to obtain a good simulation tool, during the research …
-
Elastic Analysis of the Loop Tack Test for Pressure Sensitive Adhesives
… compressing the adhesive. Then the loop is pulled up, and gradually debonds from the substrate. The loop is assumed to be nonlinearly elastic and inextensible. The mechanics of the loop tack test are studied in order to determine the impact of various factors on adhesive performance. These …
-
Effects of capillarity on the mechanical stability of small-scale interfaces
… pressures in the liquid film and large tensile forces on the surfaces. When the elastic restoring force cannot balance the capillary force, the interface will lose its stability and collapse into intimate contact (jump-on). In addition, when the elastic bodies are then pulled away from contact, …
-
Composite Posts For Enhanced And Tunable Adhesion
… this dissertation, often rely on van der Waals forces to achieve dry adhesion. Previous strategies for dry tunable adhesives have generally exploited complex fibrillar structures that are inspired by nature. The work in this dissertation investigates a different strategy for enhanced and tunable …
-
Adhesion And Wear Of Nanoscale Polymer Contacts
Atomic force microscopy (AFM) is a powerful tool for high resolution surface measurements, nanolithography, and tip-based nanomanufacturing. An understanding of the nanoscale tribological behavior of the tip-sample contact, including adhesion and wear, is critical in these applications. In this …
-
Particle engineering via surface modification: model based analysis
… mixing performance could be observed when the pull-off force equals to the collision shear force.</p><p>In summary, the processes and performance of particle engineering via surface modification methods are systematically investigated by model-based analysis along with experimental …
-
Adhesion of deformable biological interfaces: contact mechanics of pressurized cell walls and remodeling of epithelial tissues
… and separation of an inflated hyperelastic Kirchhoff--Love shell on a rigid curved substrate. The pressurized membrane formulation is also considered as a special case of this general shell formulation in the thin-wall limit. The analysis shows that finite bending stiffness reduces both the …
-
Liquid Crystal Networks for Smart Biomimetic Micro/nano Structured Adhesives
… remotely, and work adaptively in “on” and “off” states when stimulated externally. Fascinating surface structures and adaptive functionalities that can be found in biological systems have provided great inspirations to researchers for fabrication of synthetic biomimetic assemblies. While the …
-
Surface interactions in polyelectrolyte-cellulose systems and their implications for flocculation mechanisms
… part of the results was obtained using atomic force microscope (AFM). The forces between cellulose surfaces in cationic polyelectrolyte solutions depended on the molecular weight and charge density of the polyelectrolyte. Repulsion at high polymer concentrations was mainly steric in the …
Page 1 of 2