Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 19 of 19 for “"pull-off test"”.

  1. Interfacial compatibility of polymer-based structures in electronics

    … by surface free energy evaluations. The pull-off test was employed to assess the interfacial adhesion strength. Further, to determine the controlling adhesion mechanism, the fracture surfaces exposed in the pull-off test were examined by microscopy. To achieve modification of certain bulk …

    aalto Repository record for Interfacial compatibility of polymer-based structures in electronics (opens in a new tab)

  2. Durability of CFRP/Steel Bond in Natural Weather

    … durability of CFRP/steel bond was evaluated by pull-off adhesion test. MTS machine was used, and special fixture was designated to test six pull-off points in one specimen. The CFRP/steel bond was tested after 63, 120, 181, 250, and 398 days of exposure in Tampa, and it was tested after 365 days …

    usf Repository record for Durability of CFRP/Steel Bond in Natural Weather (opens in a new tab)

  3. Practicality and capability of NDT in evaluating long-term durability of FRP repairs on concrete bridges

    … practicality, and capability of non-destructive testing in assessing the durability of FRP repairs applied on concrete bridges that have been in service for some years. Three bridges were chosen as the best available case studies: (1) the Safe Bridge with sprayed FRP in British Columbia, (2) the …

    ubc Repository record for Practicality and capability of NDT in evaluating long-term durability of FRP repairs on concrete bridges (opens in a new tab) Download PDF for Practicality and capability of NDT in evaluating long-term durability of FRP repairs on concrete bridges (opens in a new tab)

  4. Nano Enhanced Surface Modification of Titanium Dental Implants for Improving Osseointegration and Biocompatibility

    … strength of the coating was investigated by the pull-off test and chemical stability in the cell culture media was studied by conducting dialysis and dissolution experiments. A series of experiments were conducted to investigate the biocompatibility of the coatings with primary human osteoblast …

    plymouth Repository record for Nano Enhanced Surface Modification of Titanium Dental Implants for Improving Osseointegration and Biocompatibility (opens in a new tab)

  5. Evaluating the bond durability of FRP-concrete systems subjected to environmental exposures

    … be employed. Fiber Reinforced Polymers (FRPs) offer one potential solution. Their use has been progressively growing in the field of civil engineering as the material's high strength to weight ratio, non-corrosive nature, and ability to conform to existing geometry make it appealing in the …

    colostate Repository record for Evaluating the bond durability of FRP-concrete systems subjected to environmental exposures (opens in a new tab)

  6. Simulation Based Optimization of Complex Monolithic Composite Structures Using Cellular Core Technology

    … of T-joints was performed using the T-joint pull-off test and compared to traditional tooling methods. Components made with the cellular core tooling method showed an improved strength at the joints. It is expected that this knowledge will help optimize the processing of complex, integrated …

    washington Repository record for Simulation Based Optimization of Complex Monolithic Composite Structures Using Cellular Core Technology (opens in a new tab)

  7. Investigation of bond in unreinforced concrete interfaces for partial depth repairs and new construction

    … To quantify interface strength, experimental tests were performed in two discrete phases: direct shear and direct tensile pull-off tests on slabs, then flexural tests on beams, each of which having differing surface roughnesses and topping slab workability. The roughnesses used for this …

    texas Repository record for Investigation of bond in unreinforced concrete interfaces for partial depth repairs and new construction (opens in a new tab)

  8. Compatibility of ultra high performance concrete as repair material : bond characterization with concrete under different loading scenarios

    … in bridge decks. It is essential that the bond offers enough strength to resist the stress due to mechanical loading or thermal effects, while also maintaining an extended service-life performance. This report attempts to assess the bond strength between UHPC and NSC under different loading …

    mtu Repository record for Compatibility of ultra high performance concrete as repair material : bond characterization with concrete under different loading scenarios (opens in a new tab)

  9. Shotcrete-Substrate Interfacial Bonding Behaviours and Mechanisms

    … widely used for stabilising rock mass and soil, offering structural reinforcement and protection against erosion and weathering. However, the effects of substrate properties and surface morphology on bonding are not fully understood, and the impact of bio-admixtures on interfacial bond strength …

    unsw Repository record for Shotcrete-Substrate Interfacial Bonding Behaviours and Mechanisms (opens in a new tab)

  10. Synthesis and characterization of functional polymers with controlled architecture and their application as anticorrosion primers

    … Navy for minimizing corrosion and they currently offer five to seven years of protection. The work described in this thesis is in line with a major program instigated by the U.S. Navy to improve the reliability of tank coatings.This thesis investigates the synthesis and use of carefully designed …

    unh-thes Repository record for Synthesis and characterization of functional polymers with controlled architecture and their application as anticorrosion primers (opens in a new tab)

  11. Bond Life of Structural Epoxy-Concrete Systems Under Accelerated Hygrothermal Aging

    … combinations of bonded systems. Direct tension (pull-off) specimens were prepared from which a subset was submerged in heated water per a prescribed accelerated aging protocol for up to 200 days. A novel test fixture was designed to facilitate controlled-rate testing of the pull-off specimens. A …

    usf Repository record for Bond Life of Structural Epoxy-Concrete Systems Under Accelerated Hygrothermal Aging (opens in a new tab)

  12. Relationship Between Surface Free Energy and Total Work of Fracture of Asphalt Binder and Asphalt Binder-Aggregate Interfaces

    … surfaces of unit area and is dependent on the test geometry and testing conditions (e.g., temperature, loading rate, specimen size, etc.). The magnitude of the bond energy (either adhesive or cohesive) can be much smaller in magnitude when compared to the total work of fracture measured using …

    tamu Repository record for Relationship Between Surface Free Energy and Total Work of Fracture of Asphalt Binder and Asphalt Binder-Aggregate Interfaces (opens in a new tab)

  13. An improved description of the bonding and consolidation for overmoulded thermoplastic composite ribbed plates

    … trials, process simulations and experimental testing, such that the mechanical performance can be more accurately predicted. The investigation of different part designs and process parameters will lead to the identification of key parameter-process-property relations and serve to develop a set …

    bristol Repository record for An improved description of the bonding and consolidation for overmoulded thermoplastic composite ribbed plates (opens in a new tab) Download PDF for An improved description of the bonding and consolidation for overmoulded thermoplastic composite ribbed plates (opens in a new tab)

  14. Feasibility of Using Ultra-High-Performance Concrete (UHPC) as a Repair Material Durability Performance, Rebar coating, and Bond Characterization

    … of chloride ion movement on the resistance offered against the ingress. The fresh and hardened properties of UHPC were investigated followed by the bond strength of UHPC with precast concrete substrate, as a function of which material is cast first. The rapid chloride penetration test was …

    clemson Repository record for Feasibility of Using Ultra-High-Performance Concrete (UHPC) as a Repair Material Durability Performance, Rebar coating, and Bond Characterization (opens in a new tab)

  15. Evaluation of CFRP-Concrete Bond Behaviour in Field Conditions: A Champlain Bridge Case Study

    … are lacking from the literature. Realistic testing techniques and correlating laboratory and field data remains a significant challenge. In this research, a comprehensive study has been conducted to evaluate three CFRP-strengthened bridge diaphragms extracted from the recently deconstructed …

    ottawa-retro Repository record for Evaluation of CFRP-Concrete Bond Behaviour in Field Conditions: A Champlain Bridge Case Study (opens in a new tab)

  16. Návrh nátěrových systémů karosářských dílů výdejních stojanů

    Tato bakalářská práce se zabývá návrhem nového nátěrového systému. Je zde řešena vhodná předúprava pro základní nátěr. Teoretická část obsahuje rozbor těchto předúprav, druhy práškových barev, možnosti nanášení práškových barev a jejich vytvrzování. Za účelem této práce byly zhotoveny vzorky na, …

    brno-tech Repository record for Návrh nátěrových systémů karosářských dílů výdejních stojanů (opens in a new tab)

  17. Ověření kvality povrchové vrstvy betonu pomocí odtrhové zkoušky

    Teoretická časť tejto bakalárskej práce definuje základné vlastnosti, delenie a použitie jednotlivých zložiek betónu a zaoberá sa vlastnosťami čerstvého a zatvrdnutého betónu, hlavne pevnosťou v ťahu. Ďalej sa venuje problematike hodnotenia trvanlivosti betónu, ktorá je priamo závislá od kvality …

    brno-tech Repository record for Ověření kvality povrchové vrstvy betonu pomocí odtrhové zkoušky (opens in a new tab)

  18. Evaluation of concrete patch repairs

    … parameters) were investigated using 7 series of tests. The flexural behaviour of the 6 different types of repair materials was investigated by performing 160 4-point flexural tests on unrepaired and repaired beam specimens with dimensions of 100 x 100 x 500 mm3. The water permeability of the …

    greece Repository record for Evaluation of concrete patch repairs (opens in a new tab)

  19. PROPORTIONING AND PROPERTIES OF ULTRA-HIGH PERFORMANCE CONCRETE MIXTURES FOR APPLICATION IN SHEAR KEYS OF PRECAST CONCRETE BRIDGES

    … and explain the material behavior of UHPC. Test results from the first part of the study showed that a w/cm of 0.20 was low enough to produce high quality UHPC mixtures. Low alkali (< 0.7% Na2Oeq) portland cement was found to be better suited for UHPC than high alkali cement as the latter …

    clemson Repository record for PROPORTIONING AND PROPERTIES OF ULTRA-HIGH PERFORMANCE CONCRETE MIXTURES FOR APPLICATION IN SHEAR KEYS OF PRECAST CONCRETE BRIDGES (opens in a new tab)