Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 58 for “"pullout test"”.

  1. Finite Element and Pullout Test Performance of Welded Wire Mats

    This paper reports on the pullout test performance of welded-wire reinforcing mats. A 126-foot high mechanically stabilized earth wall was constructed at Kennecott Utah Copper. In the lower half of the wall, single lengths of 50-foot long welded-wire mats were used. In the top half of the wall, two …

    utahstate Repository record for Finite Element and Pullout Test Performance of Welded Wire Mats (opens in a new tab)

  2. Development of a pullout test method for adhesive applied roofing systems

    … Roofing Systems (AARS). It was determined that a pullout test method -- a test in which the adhered components of roofing samples were subjected to tensile loading until failure -- could be used to quantify wind uplift performance. From the literature study, critical variables were extracted. …

    ottawa-retro Repository record for Development of a pullout test method for adhesive applied roofing systems (opens in a new tab)

  3. Bond stress distribution in concrete beams and eccentric pullout specimens

    … was used with minor alterations. An eccentric pullout specimen was used as the basic specimen for this investigation. A study of the correlation between the stress distribution in the pullout specimen and the stress distribution measured from a crack in a reinforced concrete beam was one of the …

    texas Repository record for Bond stress distribution in concrete beams and eccentric pullout specimens (opens in a new tab)

  4. Estudo da aderência bambu-bioconcreto

    … characterized by direct tensile and flexural tests and the bioconcretes were produced containing 25, 35 and 45% volumetric fractions of bamboo bioaggregates. Bioconcretes were mechanically characterized by direct tensile, uniaxial compression and diametral compression tensile tests. In order …

    brazil-uerj Repository record for Estudo da aderência bambu-bioconcreto (opens in a new tab)

  5. Monotonic and cyclic pullout resistance of geosynthetics

    … repeated non-dynamic or cyclic, and dynamic. The test method best suited to model the anchorage behaviour is the pullout test. A large scale pullout apparatus was designed that accommodates a soil sample 1.30 m long x 0.64 m wide x 0.60 m thick. Samples of a uniformly-graded medium sand were …

    ubc Repository record for Monotonic and cyclic pullout resistance of geosynthetics (opens in a new tab) Download PDF for Monotonic and cyclic pullout resistance of geosynthetics (opens in a new tab)

  6. A Comparison of the Bond Strength of Spun and Static Cast Concrete Specimens

    The purpose of this study is to determine the pullout bond strength of seven wire steel strand in two types of concrete: spun and static cast. It is perceived that the spinning process used in the manufacturing of concrete poles introduces compaction forces that densifies the concrete and hence, …

    uab Repository record for A Comparison of the Bond Strength of Spun and Static Cast Concrete Specimens (opens in a new tab)

  7. Stress transfer between FRP reinforcement and concrete

    … issues have been investigated. Firstly, a novel pullout test was developed to investigate the stress transfer mechanics and failure modes of near surface mounted (NSM) FRP strengthened RC blocks at a fundamental level. Secondly, the (FEA) was used to gain a detailed understanding of stress …

    bristol Repository record for Stress transfer between FRP reinforcement and concrete (opens in a new tab) Download PDF for Stress transfer between FRP reinforcement and concrete (opens in a new tab)

  8. Numerical modeling and analysis of pullout tests of sheet and geogrid inclusions in sand

    … studying the soil-inclusion interaction in the pullout test is by numerical modeling. Several of the numerical studies available in the literature lack the integration of consistent material characterization as input for the numerical model, resulting in little phenomenological description of …

    ubc Repository record for Numerical modeling and analysis of pullout tests of sheet and geogrid inclusions in sand (opens in a new tab) Download PDF for Numerical modeling and analysis of pullout tests of sheet and geogrid inclusions in sand (opens in a new tab)

  9. A Relationship Between the Strengths of Type N Cubic Mortar Specimens and In-Situ Mortar

    … determined using the American Societyfor Testing and Materials (ASTM) standard method using 2 inch cubes which are compressed tillfailure. There is however a disparity between the compressive strengths of mortar cubes, and insitumortar. This disparity is a result of the differences in …

    byu Repository record for A Relationship Between the Strengths of Type N Cubic Mortar Specimens and In-Situ Mortar (opens in a new tab) Download PDF for A Relationship Between the Strengths of Type N Cubic Mortar Specimens and In-Situ Mortar (opens in a new tab)

  10. Characterization of Interfacial Bond Strength in Fiber Reinforced Cementitious Composites by a Modified Pullout Method

    … reinforced cementitious composites. A modified pullout test has been designed to determine the interfacial bond parameters for natural fibers with cementitious system, and were repeated for artificial fibers for comparison studies. Steel, polypropylene, and wheat straw fibers were tested with …

    ndsu Repository record for Characterization of Interfacial Bond Strength in Fiber Reinforced Cementitious Composites by a Modified Pullout Method (opens in a new tab)

  11. A Study of Correlations between Rock Bolt Pull-Out Tests and Rock Mass Rating Scores in Underground Mining

    Rock bolt pullout testing is a common method of testing the strength of ground support in underground mining over time. Bolts that fail the pullout test fail either due to shear failure at the head of the bolt or by slipping in one piece out of structurally incompetent rock. There are many methods …

    unr Repository record for A Study of Correlations between Rock Bolt Pull-Out Tests and Rock Mass Rating Scores in Underground Mining (opens in a new tab)

  12. Bond Behavior of Fiber Reinforced Polymer Bars Under Hinged Beam Conditions

    … weight concrete (NWC) hinged beam-end specimens, tested in accordance with two laboratory conditions. Reinforcing bars of different diameter, material configuration, and finished surface preparation were tested for bond strength parameters determined in accordance with ACI Committee Report 440.3. …

    calpoly Repository record for Bond Behavior of Fiber Reinforced Polymer Bars Under Hinged Beam Conditions (opens in a new tab)

  13. Soil-geosynthetics interaction in geosynthetics reinforced soil wall

    … few years at NUS was concentrating on laboratory pullout tests and on the investigation of the drainage capability of geotextile. Only limited numbers of field pullout test on geotextile was conducted at Bukit Panjang, Singapore. Present research focus on the field and laboratory pullout tests in …

    nus Repository record for Soil-geosynthetics interaction in geosynthetics reinforced soil wall (opens in a new tab) Download file for Soil-geosynthetics interaction in geosynthetics reinforced soil wall (opens in a new tab)

  14. Factors influencing horizontal cracking in continuously reinforced concrete pavements (CRCP).

    … 0.50 to 0.40. There was a reduction in the peak pullout load as the temperature increased from 14oF to 252oF for the corroded and non-corroded rebar experiments. The corroded rebar pullout test results showed a 20-50 % reduction in bond strength compared to the non-corroded rebars. FTIR …

    unt Repository record for Factors influencing horizontal cracking in continuously reinforced concrete pavements (CRCP). (opens in a new tab)

  15. Experimental and numerical investigations to assess the behaviour of a buried pipeline in areas with high geological instability

    … have been designed to perform two groups of tests: simple interaction tests (axial pullout and transversal pullout test) and complex interaction tests (reproducing a pipeline crossing landslide). A system of steel containers (stationary and fixed) in which pipe samples are buried within the …

    cagliari Repository record for Experimental and numerical investigations to assess the behaviour of a buried pipeline in areas with high geological instability (opens in a new tab)

  16. Frontal Plane Humeral Elevation Effects on the Pullout Strength of Suture Anchors Used in Rotator Cuff Repair

    … eyelet breakage, suture failure, and anchor pullout. These failure modes necessitate intervention to reattach the tendon thus prolonging the healing period. Identifying and minimizing these failure modes will ensure optimum healing. There are two goals of this study. Firstly, the paper will …

    calpoly Repository record for Frontal Plane Humeral Elevation Effects on the Pullout Strength of Suture Anchors Used in Rotator Cuff Repair (opens in a new tab)

  17. Multiscale modeling of polymer nanocomposites

    … GNPs in chapter 1. A series of nanoindentation tests have been conducted to reveal the spatial variation of the superstructure developed along and across the flow direction of injection-molded HDPE/GNP.The uniaxial tensile test and shear test have been conducted on HDPE and xGnP/HDPE specimens. …

    msu Repository record for Multiscale modeling of polymer nanocomposites (opens in a new tab)

  18. Carbon nanotube and nanofiber reinforcement for improving the flexural strength and fracture toughness of portland cement paste

    … materials. This will be achieved by testing the integration of CNTs and CNFs in ordinary portland cement paste through state-of-the-art techniques. Different mixes in fixed proportions (e.g. water-to-cement ratio, air content, admixtures) along with varying concentrations of CNTs or …

    tamu Repository record for Carbon nanotube and nanofiber reinforcement for improving the flexural strength and fracture toughness of portland cement paste (opens in a new tab)

  19. BOND BEHAVIOR OF EPOXY-COATED REINFORCING BARS IN NON-PROPRIETARY UHPC

    … and effect on bond strength using a modified pullout test and the ASTM A944 beam-end test for No. 5 uncoated, ASTM A755 epoxy-coated, and ASTM A1124 textured-epoxy-coated reinforcing bars. The UHPC mixture with the best properties was used to cast a closure strip between two precast sections …

    ku Repository record for BOND BEHAVIOR OF EPOXY-COATED REINFORCING BARS IN NON-PROPRIETARY UHPC (opens in a new tab)

Page 1 of 3