Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 48 for “"pulse transformer"”.
-
Modeling of Multi-Pulse Transformer/Rectifier Units in Power Distribution Systems
Multi-pulse transformer/rectifier systems are becoming increasingly popular in power distribution systems. These topologies can be found in aircraft power systems, motor drives, and other applications that require low total harmonic distortion (THD) of the input line current. This increase in the …
-
Design and construction of a pulse forming network, pulse transformer power supply for the Texas Tech railgun
A pulse forming network (PFN), pulse transformer power supply has been designed, constructed, and tested to supply high current for the Texas Tech railgun. The power supply can deliver 500 kA to 1 MA for almost 1 ms to the railgun load. The current level is dependent upon the charge voltage of the …
-
Optimizing the Energy Transfer of Pulse Transformers
Various pulse transformers were designed and tested for the purpose of quickly charging a capacitive load to a differential voltage of up to 100 kV. The first pulse charger was designed and tested to charge a 0.5 nF load to +/- 50 kV in less than 10 μs. This pulse charger was also designed to be …
-
Development of a Radar Pulse Modulator
… summarizes the design of a 25kW peak power pulse modulator for an airborne medium--range weather radar. It is the purpose of the modulator to collect and store energy over a certain time period and to form this energy into a short, high-power pulse. The modulator is required to drive a …
-
Development of a pulse generator for triggered spark-gaps
… rise- time. The trigger generator uses magnetic pulse compression technique in series with a pulse transformer to achieve nanosecond risetimes. Using three modules, a dv/dt of 1 kV/ns has been achieved with rep-rates exceeding several kiloHertz. The trig- ger generator system is isolated from …
-
Design and experimental study of a dual vircator microwave source
… 1 GHz to 3 GHz. The vircators are powered by a pulsed power modulator. The modulator consists of a thyratron-switched capacitor bank that pulse charges a water transmission line through a pulse transformer. An output pulse is created by a pressurized oil switch with an output risetime of 20 ns. …
-
An Evaluation of Power Semiconductor Switches for Pulsed Power Applications
… size, efficiency, energy density, and cost of pulsed power systems. These small devices are replacing bulky spark gaps that are hard to quickly turn on or off and suffer from a short operational lifetime. Current solid-state switches available on the market can withstand hundreds of amps and …
-
Compact power conditioning and RF systems for a high power RF source
… conditioning system consisted of a spiral-strip pulse transformer, an exploding wire fuse, and a crowbar switch. The pulse transformer enabled compact inductive energy storage, voltage step-up, and electrical isolation. The exploding wire fuse was implemented as an opening switch to transfer …
-
A high-power one-millisecond pulse-forming network
… and construction of a breadboard model of a pulse-forming network to be used in a line-type generator for a space vehicle radar system is described. The PFN is unique in that it produces a one-millisecond, high-power pulse and uses linear, ferrite-core inductors. It is designed to be …
-
A multiplexed feedback solution for isolated digital power supplies
… communication protocol is DC-balanced; therefore pulse-transformer type digital isolators can be used resulting in further lower cost. The proposed solution also improves output accuracy over existing solutions. Presentation of the proposed system will be in three parts: architecture, protocol, …
-
Design and Control of Long-Pulse High-Power Klystron Modulators
… modulators required to deliver long high-power pulses (pulse amplitude 115 kV/100 A, pulse length 3.5 ms, pulse repetition rate 14 Hz) of very high quality (combined flat top ripple and droop < 0.15% of the pulse amplitude, pulse-to-pulse variability < 0.15% of the pulse amplitude, 0-99% pulse …
-
Characterization and Modeling of Nanocrystalline Magnetic Cores for Pulsed Power Applications
Magnetic cores are critical components in pulsed power systems, including pulse compression circuits, pulse transformers, and linear transformer drivers. This work investigates the response of magnetic cores subject to pulsed voltages. The results show that higher magnetization rates lead to a …
-
Pulsed Power Circuit Topologies for Gas Laser Applications
… a special class of lasers which generate laser pulses from the excitation of lasing species molecules by energetic free electrons within a gas mixture. The free electrons are created as a result of a plasma discharge. The emission spectrum of these lasers typically lies in the UV, visible and …
-
High power solid state modulator for plasma ion implementation
… flexibility and efficiency. A hybrid Marx bank - pulse transformer configuration was commissioned in a 20keV 12A plasma ion implantation system for the purpose of photonics research. The design portion of this work is accompanied by an investigation, extension and discretization of the Lieberman …
-
A Wide-Range Input Auxiliary Power Supply Based on Series-connected SiC MOSFETs for Modular Multi-level Converter
… a constant output voltage. Additionally, pulse transformer and passive snubber schemes are explored to achieve consistent gate signals which avoid the voltage balancing issues in series-connected MOSFETs at the switching transients. In-depth analysis of the proposed topology is presented, …
-
The economic effect of pulse repetition rate on the size, weight, and cost of radar modulators
… establish the economic effect of increasing the pulse repetition rate upon the size, weight, and cost of radar laodulators. Three line-type circuits with repetition frequencies of UOO, 2,000, and 10,000 r/ere designed. The size, weight, and cost of the principal components -were determined by …
-
Microwave window breakdown
… of a high voltage DC power supply to charge a pulse forming capacitor network. The capacitor network is discharged to a pulse transformer, which is directly attached to the cathode of the magnetron. The microwaves are axially extracted from the magnetron to the traveling wave resonator, or ring …
-
An analysis of pulse transformers
… understanding of the behaviour of the output pulse transformer used in an electric fence energiser, a unique application which has received little attention in the literature. Maxwell’s Equations form the starting point for an investigation into the magnetisation of the magnetic core under …
-
Výkonový měnič pro umělou napájecí síť
Práce se zabývá návrhem měniče pro umělou napájecí síť. Je zde uvedena analýza možných řešení tohoto měniče a dále obsahuje dimenzování součástek silového obvodu měniče, návrh filtrů a regulátorů měniče. V návrhu je dále obsažena i simulace dynamických vlastností výstupního střídače v prostředí …
-
Non-Invasive Picosecond Pulse System for Electrostimulation
Picosecond pulsed electric fields have been shown to have stimulatory effects, such as calcium influx, activation of action potential, and membrane depolarization, on biological cells. Because the pulse duration is so short, it has been hypothesized that the pulses permeate a cell and can directly …
Page 1 of 3