Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 120 for “"pyrometer."”.
-
Ultrasonic Pyrometer for Industrial Applications
An ultrasonic pyrometer has been developed to measure the temperatures in various gaseous environments above 1000°C and in liquid metals. It is based on the temperature dependence of the velocity of sound in solid materials. A resonance technique is used to measure the frequency of a sensor and …
-
Design, construction and calibration of a photoelectric pyrometer
The pyrometer described herein is a portable temperature measuring instrument that has no thermal capacity and which does not rely on the eye and judgment of the operator for brightness or color matches. This instrument can indicate the temperature of' a body practically instantaneously over a wide …
-
Development of a six-wavelength optical pyrometer for non-contact surface temperature measurement
<p>A Six Wavelength Pyrometer was designed, developed and tested for non-contact surface temperature measurement of opaque materials in the temperature range of 500 to 1000 °C. The system included a rotating filter wheel containing six narrow band optical band pass filters and a liquid nitrogen …
-
Analytical method for turbine blade temperature mapping to estimate a pyrometer input signal
… with the output signal of an experimental pyrometer. The goal of the method is to provide a temperature measurement benchmark based on a knowledge of blade geometry and engine operating conditions. A survey of currently available methods is discussed including both experimental and …
-
Design of a laser pyrometer for the measurement of unsteady temperature distribution during laser welding
<p>Pyrometers using a single element detector, 3x1 linear array and 3x3 area array were designed for the purpose of measuring temperatures of a spot in a pulsed laser weld-pool. The design is predicated on sampling at rates sufficient to track weld-pool temperature changes introduced by a 5 kHz …
-
Design and Fabrication of an Infrared Optical Pyrometer Asic as a Diagnostic for Shock Physics Experiments
… experiments. Data obtained from an optical pyrometer can be used to generate a blackbody curve of the material prior to and after being shocked by a high speed projectile. The sensing element consists of an InGaAs photodiode array, biasing circuitry, and multiple transimpedance amplifiers to …
-
A 3-d model for the operation of a radiation pyrometer in an axial flow turbine
… turbine engines. A limited spectrum radiation pyrometer can be used for blade temperature measurement. A model is presented which predicts the output signal from the detector unit of a pyrometer in a turbine engine application. Six inputs are required for the model. The inputs are the turbine …
-
Two-color pyrometer measurement of stainless steels due to relativistic electron beam heating in VHV/UHV environments
… the need for an absolute calibration a two-color pyrometer has been implemented. Using the ratio between two IR passbands along with two separate photodetectors a temperature vs. time graph can be plotted based upon Planck’s blackbody radiation law. Overall, an improved understanding of the …
-
Design of mask for striped filters and thin-film multi-layer emissivity modeling for multi-wavelength imaging pyrometer
Multi-Wavelength Imaging Pyrometry (M-WIP) measures thermal radiation of any target (color or gray) in multiple narrow-spectral-regions and can simultaneously determine target temperature and emissivity. One approach for measuring radiation at multiple wavelengths using a 320X244 element Pt-Si SBD …
-
Uranium casting furnace automatic temperature control development
… described. Implementation of a two-color optical pyrometer, development of an optical scanner for the pyrometer, determination of furnace thermal dynamics, and design of control systems are addressed. The optical scanning system is shown to greatly improve pyrometer measurement repeatability, …
-
Construção, calibração e análise de desempenho de um piranômetro de baixo custo, baseado no modelo Kimball-Hobbs
In this work a pyrometer using the classic model of Kimball-Hobbs was developed, tested and calibrated. The solar radiation is verified through the temperature difference between the sensible elements covered by absorbing (black) and reflecting (white) pigmentations of the incoming radiation. The …
-
Thin-Filament Pyrometry with a Digital Still Camera
A novel thin-filament pyrometer is presented here. It involves a consumer-grade color digital still camera with a charged-couple device sensor with 3008 X 2000 pixels and 12 bits per color plane. A blue Schott filter and custom white balance were used to yield similar red, green and blue …
-
Optical pyrometry for noncontact temperature measurement
A noncontact two-color pyrometer, which uses an infrared (IR) transmitting rod and IR lenses to optically measure the temperature of a molten particle as it falls in an evacuated drop tube, has been designed and tested in the laboratory and in the field. The design uses a calcium fluoride (CaF₂) …
-
Temperature Measurement Using Infrared Spectral Band Emissions From H2O
… fuel flame. The industry standard is a suction pyrometer and thermocouple which is intrusive, both spatially and temporally averaging, and difficult to use. In this work a new method utilizing the spectral emission from water vapor is investigated through modeling and experimental measurements. …
-
Experimental and radiation-hydrodynamics modeling studies of warm dense matter at the Texas Petawatt Laser
… heated target is measured by a streaked optical pyrometer. We have observed peak brightness temperatures from 1-10eV. We model the cooling and expansion of the heated target in xRAGE, an Eulerian radiation-hydrodynamics code. We present our xRAGE modeling results for both solid aluminum targets …
-
Ignition and combustion phenomena of laser-ignited aluminum agglomerates at elevated pressures
… ranging between 0.1 and 4.3 MPa. A two-color pyrometer and a broad band radiometer were employed to measure the surface temperature and the radiation emitted by the burning aluminum agglomerate, respectively. From the outputs of the two-color pyrometer and the broad band radiometer, the …
-
Heat treatment optimization of through-hardening bearing steels
Non-contact infrared thermometers, such as pyrometers, are excellent for monitoring surface temperatures of objects that are moving, difficult to reach or extremely hot without damaging the object. Pyrometers are also easy to handle and often less expensive than contact temperature sensors. If …
-
Characterization of aluminum powder ignition
… heated carbon filament. A three-color pyrometer and a high-speed camera were used in the project to determine the filament surface temperature at the instant of ignition. When using the pyrometer, a sharp rise in a photodiode signal from the powder coating was used to determine the …
-
Ignition and combustion phenomena of laser-ignited boron agglomerates at elevated pressures
… (20/80) environment. A near-infrared two-color pyrometer and a broadband radiometer were used to measure the surface temperature and the radiation emitted by the burning agglomerates. From the temporal outputs of the pyrometer and radiometer, the ignition delay time, the burning time and the …
-
Temperature control and measurement in spike anneal
… Different designs for the edge ring and the pyrometers have been tried and successfully implemented. This dilemma is resolved with the design of a spectral coating that maximizes reflectivity in the pyrometer band pass and maximizes absorptivity in the longer wavelengths.
Page 1 of 6