Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 146 for “"quasi-static loading"”.

  1. Full-scale glass curtain wall systems under quasi-static loading

    … for modern curtain walls by performing quasi-static vacuum chamber testing of full-scale curtain wall systems. Using a 10 ft wide x 12 ft tall x 7 ft deep vacuum chamber, quasi-static loading was applied to five full-scale glass CW specimens until failure. All five specimens were stick- …

    missouri Repository record for Full-scale glass curtain wall systems under quasi-static loading (opens in a new tab)

  2. Experimental investigation of tearing fracture in sheets under quasi-static loading

    … of metal plates under blast and projectile loading for many years, definitive open-source analysis has only been recently forthcoming. This analysis is most often in the form of scaled recreations of the dynamic blast event, or live fire tests. New developments in methods of recreating blast …

    nps Repository record for Experimental investigation of tearing fracture in sheets under quasi-static loading (opens in a new tab)

  3. Performance of unstiffened steel plate shear walls under cyclic quasi-static loading

    … perimeter attachment to the surrounding frame. Quasi-static cyclic testing was conducted under standard testing protocols used to determine the seismic performance of steel structures. The determination of the load deformation response properties and resulting strain distribution in various …

    ubc Repository record for Performance of unstiffened steel plate shear walls under cyclic quasi-static loading (opens in a new tab) Download PDF for Performance of unstiffened steel plate shear walls under cyclic quasi-static loading (opens in a new tab)

  4. Strength, deformation and compression behavior of tungsten carbide, krypton, and xenon under quasi-static loading

    … optical techniques to be used on materials under quasi-static stress loads. Synchrotron radiation is brilliant, tunable, and highly focused, allowing precision measurements of small samples. Pressure media may be used to minimize the effects of non-hydrostatic stress, or if non-hydrostaticity is …

    msu Repository record for Strength, deformation and compression behavior of tungsten carbide, krypton, and xenon under quasi-static loading (opens in a new tab)

  5. Energy harvesting from localized dynamic transitions in post-buckled elastic beams under quasi-static loading

    "The presented work in this thesis builds on the novel idea of exploiting snap-through transitions in post-buckled elastic elements to harvest energy at very low frequencies." -- Introduction, page 1.

    msu Repository record for Energy harvesting from localized dynamic transitions in post-buckled elastic beams under quasi-static loading (opens in a new tab)

  6. Quasi-static Loading Effects on a Mar shalling Yard Calibration of a Creep-SCLAY1S Model Using Satellite and In Situ Measurements

    … cyclic vertical movements from operational loading rather than measurement noise. Oper ational loading was represented using a quasi-static approach, where train loads were activated and deactivated over time according to track occupancy patterns. The re sults show that excess pore pressure …

    chalmers Repository record for Quasi-static Loading Effects on a Mar shalling Yard Calibration of a Creep-SCLAY1S Model Using Satellite and In Situ Measurements (opens in a new tab)

  7. Rate Dependent Strength Characterization of Carbon Fiber Composite Laminates

    … materials for modeling is often completed at quasi-static loading rates regardless of the loading rates the final part will experience. This thesis will discuss the rate dependency of strength characteristics and Schapery parameters of a composite laminate under quasi-static, intermediate, and …

    washington Repository record for Rate Dependent Strength Characterization of Carbon Fiber Composite Laminates (opens in a new tab)

  8. Design and Analysis of Steel Plate Shear Walls

    … steel plate shear walls that were tested under quasi-static loading. The investigation includes energy dissipation, axial forces in members, bending moment, curvature, infill stresses, and shear distribution. Recommendations are made for future projects.</p>

    ut-knoxville Repository record for Design and Analysis of Steel Plate Shear Walls (opens in a new tab)

  9. Damage and Failure Analysis of Co-Cured Fiber-Reinforced Composite Joints

    … lap joint counterparts for unidirectional and quasi-isotropic adherend lay-ups. This research extends the comparative investigation of Coates and Armanios by focusing upon characterizing and differentiating the damage initiation and progression mechanisms under quasi-static loading. Six …

    gatech Repository record for Damage and Failure Analysis of Co-Cured Fiber-Reinforced Composite Joints (opens in a new tab)

  10. Impact Damage Resistance of Shape Memory Alloy Hybrid Composite Structures

    … (SMA) bars and beams under tension and bending loading was studied. A theoretical model is presented that can give quantitative relations between the martensite fraction, the applied load, and the strain energy absorbed in the shape memory alloy (SMA). It was found analytically that the …

    vt Repository record for Impact Damage Resistance of Shape Memory Alloy Hybrid Composite Structures (opens in a new tab)

  11. Modeling of Brain Tissue as Porous Visco-hyperelastic Medium

    … of the bi-phase brain tissue is simulated under quasi-static loading. Calibration of the model parameters is done according to the experimental data acquired from former research.

    chalmers Repository record for Modeling of Brain Tissue as Porous Visco-hyperelastic Medium (opens in a new tab)

  12. Rate effects on the thermo-mechanical compressive response of conventional and metastable β-Ti alloys

    … and automotive industries, where dynamic loading conditions with strain rates from 102 s−1 to over 104 s−1 are common. Alloys exhibiting Twinning Induced Plasticity (TWIP) offer enhanced toughness and ductility under such conditions, but their behavior at high strain rates and elevated …

    colo-mines Repository record for Rate effects on the thermo-mechanical compressive response of conventional and metastable β-Ti alloys (opens in a new tab)

  13. Cracking of Laminated Glass Initiated by Low Velocity Impacts

    … from those figures determined by others, using quasi-static loading, of between 0.7 and 0.8 MPa m^1/2. If the value for K determined during quasi-static loading is applicable to this work, then the length of surface cracks in the glass is calculated to be between 55 and 72 x 10(^-6) m. The …

    city-london Download PDF for Cracking of Laminated Glass Initiated by Low Velocity Impacts (opens in a new tab)

  14. Progressive Damage and Failure Analysis of Composite Laminates

    … and fails in a complex manner under various loading conditions which makes it a hard problem to analyze. Lack of reliable and efficient failure analysis tools for composites have led industries to rely more on coupon and component level testing to estimate the design space. Due to the complex …

    washington Repository record for Progressive Damage and Failure Analysis of Composite Laminates (opens in a new tab)

  15. The investigation of accumulative roll bonding for processing TI/Al multilayered composite targets for perforation testing

    … the Ti/Al MLCs were first subjected to quasi-static loading to determine the effects of anisotropy. The MLCs were then subjected to perforation testing using projectiles with various apex angles. The effects of perforation testing were studied in terms of varying ballistic parameters and …

    alabama Repository record for The investigation of accumulative roll bonding for processing TI/Al multilayered composite targets for perforation testing (opens in a new tab)

  16. Minimum steel requirements for masonry walls : out-of-plane forces

    … walls were tested under monotonic quasi-static loading. Test results showed that for typical 8 feet (2.44 m) storey height walls, the main steel may be spaced at more than 4 feet (1.22 m) and full primary bending moment may still be achieved. Joint reinforcement appeared to be …

    ubc Repository record for Minimum steel requirements for masonry walls : out-of-plane forces (opens in a new tab) Download PDF for Minimum steel requirements for masonry walls : out-of-plane forces (opens in a new tab)

  17. Blast response of structural envelope elements : LG windows and CFS roof trusses

    … predict their performance under blast loads. The static resistance function of different LG panels was experimentally evaluated. Numerical models were developed and validated using experimental data to predict the response of LG systems under static and dynamic loading conditions. An …

    missouri Repository record for Blast response of structural envelope elements : LG windows and CFS roof trusses (opens in a new tab)

  18. The Application of Computer Modelling to the Design Optimisation of a Microexcavator Digging

    … Powerfab 360WT microexcavator digging arm under static or Quasi-Static loading conditions.<br/><br/>Practical strain gauge tests were carried out to assess the accuracy of the computer model with satisfactory results.<br/><br/>A design optimisation method has been developed using a structural …

    southwales Repository record for The Application of Computer Modelling to the Design Optimisation of a Microexcavator Digging (opens in a new tab) Download PDF for The Application of Computer Modelling to the Design Optimisation of a Microexcavator Digging (opens in a new tab)

  19. Nanocomposite Material Properties Estimation and Fracture Analysis via Peridynamics and Monte Carlo Simulation

    … is performed using a single realization and quasi-static loading conditions via peridynamics allowing simultaneous and spontaneous propagating fractures. The model is validated against experimental data available in the open literature.

    rice Repository record for Nanocomposite Material Properties Estimation and Fracture Analysis via Peridynamics and Monte Carlo Simulation (opens in a new tab)

Page 1 of 8