Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"radial equilibrium"”.

  1. A Hybrid Vortex Solution for Radial Equilibrium in Axial Compressors

    A hybrid vortex solution using the radial equilibrium equation for three dimensional design in axial compressors is generated. One of the most common used vortex solutions is Free Vortex. However, it ignores the fact that axial velocity varies with radius. The Hybrid Vortex includes axial velocity …

    embry-riddle Repository record for A Hybrid Vortex Solution for Radial Equilibrium in Axial Compressors (opens in a new tab)

  2. Determination of a Simplified High-Order Vortex Equation for Radial Equilibrium with CFD Verification

    … model combines the well-established simple radial equilibrium vortex models into a higher order equation that will establish the basis for a more flow-accurate model. In this paper, we will discuss the basis and derivation of these vortex models, the shortcomings of current techniques, and …

    embry-riddle Repository record for Determination of a Simplified High-Order Vortex Equation for Radial Equilibrium with CFD Verification (opens in a new tab)

  3. The Numerical solution of the radial-equilibrium equation for swirling flow in arbitrarily shaped ducts

    The radial-equilibrium equation is discussed with regard to turbomachinery. The complete equation is derived for nonviscous flow and the simplifications are indicated. Five different techniques for the solution of three-dimensional compressible flow in a duct are examined in detail. A comparison …

    carleton Repository record for The Numerical solution of the radial-equilibrium equation for swirling flow in arbitrarily shaped ducts (opens in a new tab)

  4. The finite element method applied to flows in turbomachines.

    … to The two-dimensional, inviscid, compressible radial equilibrium equation for axial compressors. Isoparametric elements are used along with three-point Gaussian integration for stiffness matrix evaluation. The radial equilibrium equation is put into quasi-harmonic form for stream function …

    nps Repository record for The finite element method applied to flows in turbomachines. (opens in a new tab)

  5. Pressure distribution on a rotating axial-flow compressor blade

    … distributions on the rotor blade using simple radial equilibrium, boundary layer theory and an existing finite-difference, blade-to-blade computer program is presented. A comparison of the experimental and theoretical pressure distribution on the rotor blade at 25 percent, 50 percent and 75 …

    vt Repository record for Pressure distribution on a rotating axial-flow compressor blade (opens in a new tab)

  6. Prediction of turbine performances with stator restaggering

    <p>Turbine performances with different design radial velocity diagrams as affected by stator restaggering were investigated with a computational method. This approach, based on radial equilibrium and continuity considerations at the inlets and exits of each blade row. allowed velocity diagram …

    ut-knoxville Repository record for Prediction of turbine performances with stator restaggering (opens in a new tab)

  7. Comparison of measured and calculated flow properties after the rotating cascades of a three-stage axial-flow compressor.

    … rotors of turbomachines by measuring only the radial distributions of total temperature, total pressure, and absolute flow angle and using these data to calculate the flow velocities by the non-isentropic radial equilibrium equation such that the measured flow rate is matched. Curvature effects …

    nps Repository record for Comparison of measured and calculated flow properties after the rotating cascades of a three-stage axial-flow compressor. (opens in a new tab)

  8. Preliminary design code for an axial stage compressor

    … and free-vortex flow between blade rows, simple radial equilibrium, and a thermally and calorically perfect gas. The program allows a fan or core stage design and uses an open architecture to facilitate upgrades and extensions. Using the Naval Postgraduate Schoolαs (NPS) transonic compressor …

    nps Repository record for Preliminary design code for an axial stage compressor (opens in a new tab)

  9. A Hybrid Vortex Solution for Surge Margin Enhancement in Axial Compressors

    A new vortex solution to the Simple Radial Equilibrium Equation (SREE) is presented that incorporates endwall effects into the preliminary design stage of a single stage, low pressure compressor with a hub-to-tip ratio of 0.4 and non-axial inlet flow. This vortex solution is proposed to overcome …

    embry-riddle Repository record for A Hybrid Vortex Solution for Surge Margin Enhancement in Axial Compressors (opens in a new tab)

  10. Plasma Dynamics Using Ion Doppler Spectroscopy in HIT-SI3

    … an Abel-inversion algorithm to gain insight into radial equilibrium profiles after ion spin up. Axi-symmetric ion flow is calculated from the geometric axis to the inner wall along the major radius for relative density, temperature, and ion flow velocity. The profiles are then compared to …

    washington Repository record for Plasma Dynamics Using Ion Doppler Spectroscopy in HIT-SI3 (opens in a new tab)

  11. Design of Multi-Stage Compressor Using Streamline Curvature Method

    … design. This method is superior to the simple radial equilibrium method because it accounts for losses and secondary flow in the computation. A twenty-five stage subsonic axial compressor, with a total pressure ratio of 40.39, is designed using the streamline curvature method. This multi-stage …

    tamu Repository record for Design of Multi-Stage Compressor Using Streamline Curvature Method (opens in a new tab)

  12. Development and Applications of Jump-In Equilibrium Modeling Methods for Pebble-Bed High-Temperature Gas-Cooled Reactors

    … designs, from reactor start-up to operation at equilibrium, is more challenging compared to conventionally fueled reactors due to the continuous movement of fuel pebbles through the reactor during operation. Jump-in equilibrium modeling methods were developed to reduce the computational burden …

    utk-theses Repository record for Development and Applications of Jump-In Equilibrium Modeling Methods for Pebble-Bed High-Temperature Gas-Cooled Reactors (opens in a new tab)

  13. The role of critical eigenvalues and eigenfunctions in a class of singularly perturbed problems

    … involves among other things spectral analysis of radial operators, justification of formal asymptotic expansions, and perturbation theory.</p> <p>The same analysis carried to the case where u<sub>ε</sub> is a radial equilibrium of the corresponding evolution problem with an interface γ, shows that …

    utk-theses Repository record for The role of critical eigenvalues and eigenfunctions in a class of singularly perturbed problems (opens in a new tab)