Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 38 for “"reactive power flow"”.
-
IMPLEMENTATION OF REACTIVE POWER FLOW CONTROL IN A SINGLE-PHASE MICROGRID
Advancements have been made in the field of power electronics and particularly in energy management of microgrids. In this thesis, we present a comparison of two single-phase reactive power control strategies used to achieve a unity power factor with an energy management system in an AC microgrid. …
-
IMPLEMENTATION OF ACTIVE AND REACTIVE POWER FLOW CONTROL IN A SINGLE PHASE MICROGRID
A microgrid is a miniature version of a large power grid, and its purpose is to operate autonomously and to increase the reliability of the power system in a naval installation. It is a local area power system, which is able to operate either as a subset of a main grid or in an autonomous mode …
-
A Wide Range and Precise Active and Reactive Power Flow Controller for Fuel Cell Power Conditioning Systems
… its impact and maximize feasibility of the power conditioning system in distributed generations. Because the grid voltage is constantly changing, the inverter must be able to response to it. If the inverter is unable to respond properly, then the grid voltage power comes back to the system …
-
Optimal Var compensation on a utility transmission system
This paper presents a method for realizing power loss and reactive power flow reductions on an electrical power transmission system. The method determines the size and location of reactive power compensating capacitors. In the first phase, candidate busses (nodes) are identified by determining …
-
The development of a reactive power management technique for a planning environment
… algorithm is developed for the management of reactive power flow in an electric power system. The technique is designed to assist transmission planning engineers in establishing satisfactory base-case power flow solutions. The objective in the algorithm is to reduce real power loss in the …
-
Load flow and sensitivity studies for power systems
<p>A study of load flow and its relationship to sensitivity calculation is conducted on several sample power systems under balanced conditions. The Newton-Raphson load flow method has been extended for the preparation of a computer code for sensitivity analysis. Three test systems have been used to …
-
Modeling of voltage source converter based HVDC transmission system in EMTP-RV
… based HVDC system is a feasible option for bulk power transmission over long or short distances and the grid integration of renewable energy sources in existing transmission and distribution systems. The main requirement in a power transmission system is the precise control of active and reactive …
-
Steady-state and transient-state analyses of renewable energy inverter
… (DC). An inverter is needed to convert this DC power into an alternating current (AC) for regular usage. The main purpose of this dissertation was to determine the performance of the inverter under steady-state and transient-state conditions, and then develop a power flow model that would be …
-
ACTIVE AND REACTIVE POWER CONTROL IN BIDIRECTIONAL DC-LINK CONVERTER
… hex bridge converters which allow bidirectional power flow. Due to intermittent nature of most renewable energy systems and varying loads in microgrids, it is important to have a reliable and robust control system. Various control methods for these systems based on 0dq approach and vector control …
-
Demonstration of a power conditioning system for grid-connected fuel cell power plant.
This thesis demonstrates a power conditioning system (PCS) for grid-connected hybrid direct fuel-cell with turbine (DFC/T) power plant. The PCS is an interface between distributed generation and utility grid. It regulates voltage, current and power transmitted from the hybrid DFC/T power plant to …
-
Design and modeling of a power conditioning system for the hybrid fuel-cell/turbine power plant.
This thesis presents the model of a power conditioning system (PCS) for the hybrid direct fuel-cell with turbine (DFC/T) power plant. It regulates voltage, current and power transmitted from the hybrid DFC/T power plant to utility grid. The proposed system consists of DC/DC converters, a …
-
Inter-area oscillation damping in large scale power systems with unified power flow controllers
"Power system oscillations occur in power networks as a result of contingencies such as faults or sudden changes in load or generation. They are detrimental to the operation of the system since they affect system stability and the optimal power flow through it. These oscillations do not usually …
-
Wind energy and power system interconnection, control, and operation for high penetration of wind power
… requires innovations in different areas of power engineering. Methods for improving wind energy and power system interconnection, control, and operation are proposed in this dissertation. A feed-forward transient compensation control scheme is proposed to enhance the low-voltage ride-through …
-
Soft-switching solid state transformer (S4T)
… output. It provides features of bidirectional power flow control, reactive power compensation, harmonics suppression, voltage regulation, sag correction, and fault isolation. Conventional topologies to implement the SST have issues of complex multi-stage structure, high device count, …
-
Estratégia de minimização de perdas para um gerador de indução duplamente alimentado
… This strategy consists in finding the optimum reactive power sharing between the rotor and stator circuits of the generator. As this work is motivated to reduce costs and improve system efficiency, this research is focused on variable speed generation systems using a doubly fed induction …
-
Comparison of different methods for OPF problem of multi-objective optimization
… paper presents details of a specific optimal power flow (OPF) named active-reactive-OPF (AR-OPF) that can be used to analyze both active and reactive power flow simultaneously. It is compared with a conventional current injection model using the Newton-Raphson method to complete the …
-
Optimal Sizing and Location of Static and Dynamic Reactive Power Compensation
<p>The key of reactive power planning (RPP), or Var planning, is the optimal allocation of reactive power sources considering location and size. Traditionally, the locations for placing new Var sources were either simply estimated or directly assumed. Recent research works have presented some …
-
Dynamic control of grid power flow using controllable network transformers
… rated direct AC-AC converter to control the power through an existing passive LTC. By using a modulation strategy based on virtual quadrature sources (VQS), it is possible to control both the magnitude and the phase angle of the output voltage of the CNT without having any inter-phase …
-
Development and tuning of automatic control methods for nonlinear systems using computational intelligence techniques with emphasis on the control of unmanned aerial vehicles
… to address the problems related to optimal reactive power flow (ORPF) management in smart distribution grids and critical parameter identification in WWTPs. To be more specific a CPSO optimization and control framework was designed in order to tackle the reactive power flow (RPF) problem of …
Page 1 of 2