Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"reactive sintering"”.

  1. Investigation of Solid-State Reactive Sintering and Rapid Laser Reactive Sintering for Al-Doped Li7La3Zr2O12 Solid-State Electrolyte

    … energy densities. And one promising option for a sintering aid and conductivity enhancer is Al3+, which will help to substitute for Li sites of LLZO and reach its full potential. However, to even begin approaching these high performances, the material processing conditions must be optimized and …

    clemson Repository record for Investigation of Solid-State Reactive Sintering and Rapid Laser Reactive Sintering for Al-Doped Li7La3Zr2O12 Solid-State Electrolyte (opens in a new tab)

  2. Fabrication, characterization, and hydrogen permeation in [BaCe_x Zr_(0.9-x) Y_0.1 O_(3-[delta])] prepared by solid-state reactive sintering

    … Materials were prepared by solid-state reactive sintering from both BaCO3 and BaSO4 barium precursors. The cubic phase was observed over all ranges of the differing ceria to zirconia ratios. In an effort to decrease the thickness and increase the flux of hydrogen through these membranes, …

    colo-mines Repository record for Fabrication, characterization, and hydrogen permeation in [BaCe_x Zr_(0.9-x) Y_0.1 O_(3-[delta])] prepared by solid-state reactive sintering (opens in a new tab)

  3. SYNTHESIS AND CHARACTERIZATION OF ENERGETIC NANOMATERIALS WITH TUNABLE REACTIVITY FOR PROPULSION APPLICATIONS

    … it was found that combustion inefficiencies from reactive sintering could be mitigated by introducing a gas-generating oxidizer. To explore combustion improvements in the fuel, a metal fuel nanoparticle manufacturing method was explored, though the combustion performance was again limited by …

    maryland Repository record for SYNTHESIS AND CHARACTERIZATION OF ENERGETIC NANOMATERIALS WITH TUNABLE REACTIVITY FOR PROPULSION APPLICATIONS (opens in a new tab)

  4. Effects of Cerium Concentration and Scattering Centers on the Performance of GAGG Transparent Ceramic Scintillators

    … processing methods with low overall yield. Reactive sintering offers a more economical alternative, but as with other processing techniques, the elimination of scattering centers—such as porosity and secondary phases—remains a significant challenge. These defects hinder the production of …

    ucf Repository record for Effects of Cerium Concentration and Scattering Centers on the Performance of GAGG Transparent Ceramic Scintillators (opens in a new tab)

  5. TRANSPARENT CERAMICS & THEIR COMPOSITE SYSTEMS FOR PROTECTIVE WINDOW APPLICATIONS

    … spinel was fabricated through field assisted sintering of compositional powders under relatively low pressing forces. Additionally, a comparison between reactive and non-reactive sintering was made. To better position transparent ceramics in the industry, it is crucial to establish a method to …

    nus Repository record for TRANSPARENT CERAMICS & THEIR COMPOSITE SYSTEMS FOR PROTECTIVE WINDOW APPLICATIONS (opens in a new tab) Download file for TRANSPARENT CERAMICS & THEIR COMPOSITE SYSTEMS FOR PROTECTIVE WINDOW APPLICATIONS (opens in a new tab)

  6. Enhancing Protonic Ceramic Fuel Cells by Advanced Laser Processing for Superior Performance

    … geometry and layer thickness, while rapid laser reactive sintering (RLRS) replaces traditional sintering, reducing processing time. Additionally, a segmented-in-series stack design enhances power output without compromising peak power density. These advancements significantly improve PCFC …

    clemson Repository record for Enhancing Protonic Ceramic Fuel Cells by Advanced Laser Processing for Superior Performance (opens in a new tab)

  7. Understanding proton-conducting perovskite interfaces using atom probe tomography

    … differing processing methods: (1) spark plasma sintering (SPS), (2) conventional sintering using powder prepared by solid-state reaction followed by high-temperature annealing (HT), (3) conventional sintering using powder prepared by solid-state reaction with NiO used as a sintering aid …

    colo-mines Repository record for Understanding proton-conducting perovskite interfaces using atom probe tomography (opens in a new tab)

  8. Estimating valence states of transition metal dopants in polycrystalline strontium titanate and barium zirconate with magnetometry

    … when small amounts of Ni are incorporated, sintering temperatures are significantly reduced. In both systems, the valence state of the dopant may affect transport properties and redox reactions in electrochemical applications. Valence states can be estimated from their magnetic properties …

    colo-mines Repository record for Estimating valence states of transition metal dopants in polycrystalline strontium titanate and barium zirconate with magnetometry (opens in a new tab)

  9. A Nitride-Based Reaction for the Formation of a Three-Phase Molybdenum-Silicon-Boron Intermetallic Alloy

    … a continuous protective layer. In this project, reactive sintering of molybdenum, Si3N4 and BN powders was used to create a semi-continuous molybdenum matrix with a fine dispersion of the A15 and T2 intermetallics. Sintering of the materials was further enhanced by the use of submicron-sized …

    gatech Repository record for A Nitride-Based Reaction for the Formation of a Three-Phase Molybdenum-Silicon-Boron Intermetallic Alloy (opens in a new tab)

  10. A Study of the Sintering Behaviour of Ni-Ti Powder Compacts Using Differential Scanning Calorimetry

    … capable of elucidating phase formation during sintering of a 50 atomic percent Ni and 50 atomic percent Ti powder compact in order to increase the understanding of the sintering mechanisms that take place during solid state and reactive sintering. Using a variety of Nickel and Titanium powder …

    waterloo Repository record for A Study of the Sintering Behaviour of Ni-Ti Powder Compacts Using Differential Scanning Calorimetry (opens in a new tab)

  11. Nanoionic proton conductivity enhancement in solid-state reactive sintered BariumCerium(0.7)Zirconium(0.1)Yttrium(0.1)Ytterbium(0.1)Oxygen(3-delta)

    … Using the recently discovered solid-state reactive sintering (SSRS) technique, these membranes are 1/10th the cost of normal polymeric/sol-gel synthesized materials, and in addition require less processing time due to the removal of the calcination step and the lower required sintering …

    colo-mines Repository record for Nanoionic proton conductivity enhancement in solid-state reactive sintered BariumCerium(0.7)Zirconium(0.1)Yttrium(0.1)Ytterbium(0.1)Oxygen(3-delta) (opens in a new tab)

  12. Ceramic electrochemical cells for power generation and fuel production

    … this PhD thesis develops a novel solid state reactive sintering (SSRS) method that enables simplified PCFC fabrication directly from raw precursor oxides/carbonates using a suitable reactive sintering aide. In addition, this thesis develops a novel triple conducting oxide (mixed proton, …

    colo-mines Repository record for Ceramic electrochemical cells for power generation and fuel production (opens in a new tab)

  13. Investigation of Thermal Behavior in Combustion of Al/Fe3O4 Nanothermite Film

    … and shifts the combustion mechanism from reactive sintering to diffusion-driven reaction. Particle morphology also strongly affected flame propagation. At ER = 3, CS films propagated faster than PM films, with velocities of 11.93 cm/s and 6.11 cm/s, respectively. The inverse-modeled …

    waterloo Repository record for Investigation of Thermal Behavior in Combustion of Al/Fe3O4 Nanothermite Film (opens in a new tab)

  14. Probing the ignition mechanism of aluminum nanothermites

    … can occur even in the absence of oxygen, via reactive sintering mechanism. Furthermore, electron microscopy techniques are used to show evidence of condensed phase initiation in other nanothermites. The role of positive ions in correlation to ignition in nanothermites is also studied for …

    maryland Repository record for Probing the ignition mechanism of aluminum nanothermites (opens in a new tab)

  15. Efeitos da adição de resíduos de cinza da casca de café na microestrutura e propriedades de cerâmicas à base de cordierita

    … is difficult to prepare due to its narrow sintering range and the existence of secondary phases that raises its thermal expansion coefficient. Fluxes are generally used to stimulate the sintering of cordierite precursor powders and to modify the microstructures and properties of these …

    brazil-ufrn Repository record for Efeitos da adição de resíduos de cinza da casca de café na microestrutura e propriedades de cerâmicas à base de cordierita (opens in a new tab)

  16. IGNITION, COMBUSTION AND TUNING OF NANOCOMPOSITE THERMITES

    … arise from fundamentally different phenomena. A reactive sintering mechanism occurs which rapidly decomposes the oxidizer and pressurizes the system. This is followed by the remainder of the fuel burning in a gaseous, pressurized environment, where the burning rate is controlled by the fuel. Also …

    maryland Repository record for IGNITION, COMBUSTION AND TUNING OF NANOCOMPOSITE THERMITES (opens in a new tab)

  17. Fabrication and characterization of protonic-ceramic fuel cells and electrolysis cells utilizing infiltrated lanthanum nickelate electrodes

    … HTPC electrolytes fabricated by the solid-state reactive sintering technique. Two types of devices were made; a symmetric cell used for electrode characterization, and a full fuel cell/electrolysis cell used for device performance characterization. The symmetric cell consists of a 1 mm thick …

    colo-mines Repository record for Fabrication and characterization of protonic-ceramic fuel cells and electrolysis cells utilizing infiltrated lanthanum nickelate electrodes (opens in a new tab)

  18. Bulk ceramic bismuth ferrite substituted with rare earths: Synthesis and characterisation

    … size distribution and homogeneous mixtures. A reactive sintering technique was used for both methods resulted in ceramics with consistent microstructural and piezoelectric properties. The chemical homogeneity and phase composition of final ceramics was critically dependent upon the diffusivity …

    unsw Repository record for Bulk ceramic bismuth ferrite substituted with rare earths: Synthesis and characterisation (opens in a new tab)

  19. Design and characterisation of MgB2 bulk superconducting magnets containing Y2O3 and Mg additions

    … brief review of MgB2 literature. The concept of sintering is then introduced, followed by a description of the Field Assisted Sintering Technique (FAST). Finally, articles studying the manufacture of MgB2 bulks by FAST are discussed, before introducing relevant papers on the main types of MgB2 …

    oxford Repository record for Design and characterisation of MgB2 bulk superconducting magnets containing Y2O3 and Mg additions (opens in a new tab)

  20. Imaging of Thermal Propagation in Combustion of Al/CuO Core-Shell Nanothermite Film

    … Discussions have been made on the so-called "reactive sintering" mechanism — in which reacting particles amalgamate before burning — and its effects on micro-scale combustion behavior. It has been shown that the self-contained nature of the CS film promotes spatio-thermometric uniformity …

    waterloo Repository record for Imaging of Thermal Propagation in Combustion of Al/CuO Core-Shell Nanothermite Film (opens in a new tab)

Page 1 of 2