Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 374 for “"rebar"”.
-
Effects of Rebar Temperature and Water to Cement Ratio on Rebar-Concrete Bond Strength of Concrete Containing Fly Ash
… investigation to identify the effects of rebar temperature, fly ash and water to cement ratio on concrete porosity in continuously reinforced concrete pavements (CRCP). Samples were cast and analyzed using pullout tests. Water to cement ratio (w/c) and rebar temperature had a significant …
-
Evaluation of the Behaviour of Continuously Galvanized Rebar
… structures. The salts induce corrosion of rebar, by penetrating the concrete and breaking down the protective film formed on the steel in the high alkaline environment of the concrete. Since the corrosion products occupy a volume larger than that of the corroded steel, they crack the …
-
Failure mechanism of resin anchored rebar in potash
The use of reinforcing bar (rebar) anchored with resin is a common method of rock support in both hard and soft rock mining. The average bond strength, or the load that the support can sustain for a linear length of bond to the rock, is typically determined through a series of pull tests. The …
-
Improving Safety of Rebar Cages using Innovative Connectors
Prefabricated rebar cages are widely used in reinforced concrete constructions. These temporary structures are built by connecting longitudinal and transverse reinforcing bars (rebars), typically using tie-wires. Previous studies have identified tie-wire connections as the "weak links" in the rebar …
-
Stability of Bridge Column Rebar Cages during Construction
… lateral behavior and stability of bridge column rebar cages were investigated to reduce the potential of failure and collapse during construction. Rebar cages are temporary structures made of longitudinal and transverse reinforcing bars that are connected by tie wire connections. Recent collapses …
-
Anchorage of Epoxy-Coated Rebar Using Chemical Adhesives
… existing concrete structure. Typically, uncoated rebar post-installed with a chemical adhesive is used in these applications, which may lead to corrosion. Departments of Transportation and local bridge owners have used and continue to use epoxy-coated rebar in post-installed applications due to …
-
Non-destructive detection of corrosion of epoxy coated rebar
… concrete are particularly at risk. Epoxy coated rebar (ECR) is a popular choice for the latter structures. However, corrosion of ECR, which occurs due to coating damage, poses a challenge to non-destructive corrosion detection. This study investigated the corrosion behaviour, accelerated …
-
INVESTIGATING CHLORIDE INGRESSION IN CONCRETE AND CHLORIDE-INDUCED REBAR CORROSION
… effects of FFA and sodium nitrate (SN) on rebar corrosion under natural conditions, adopting Fick’s second law to predict chloride concentrations at the steel-matrix interface. The predicted chloride concentrations profiles provide good estimation on the corrosion initiation time. …
-
Bending Behavior of Concrete Beams with Fiber/Epoxy Composite Rebar
… fiber-reinforced polymer (FRP) composite rebar manufactured on a three-dimensional braiding machine for use as reinforcement in concrete beams under four-point bending loads. Multiple tows of prepreg composite fibers were pulled to form a unidirectional core. The core was consolidated with …
-
Evaluation of Concrete Bridge Decks Comprising Twisted Steel Micro Rebar
… investigate the effects of twisted steel micro rebar (TSMR) fibers on 1) the mechanical properties of concrete used in bridge deck construction and 2) the early cracking behavior of concrete bridge decks. This research involved the evaluation of four newly constructed bridge decks through a …
-
Monitoring Corrosion of Rebar Embedded in Mortar Using Guided Ultrasonic Waves
Results are presented and discussed within the framework of a corrosion process degradation model and service life. A thorough review and discussion of the corrosion process, modeling the propagation of corrosion, nondestructive methods for monitoring corrosion in reinforced concrete, and guided …
-
Effects of Surface Condition on the Corrosion Performance of Stainless Steel Rebar
… of carbon (black) steel reinforcing bars (rebar) is the major cause of damage and deterioration of reinforced concrete structures in maritime regions and in climates where de-icing salts are used. The cause of the corrosion is diffusion of chloride ions to the steel surface through the …
-
Reliability model for ductile hybrid frp rebar using randomly dispersed chopped fibers
RELIABILITY MODEL FOR DUCTILE HYBRID FRP REBAR USING RANDOMLY DISPERSED CHOPPED FIBERS Fiber reinforced polymer composites or simply FRP composites have become more attractive to civil engineers in the last two decades due to their unique mechanical properties. However, there are many obstacles …
-
ANALYZING THE EFFECT OF REBAR HEATING ON BRIDGE STRUCTURES: SURFACE TEMPERATURE IMPLICATIONS
… power heat source (EPH) within transversal rebars. The objective is to identify the appropriate EPH capable of maintaining bridge surface temperatures above freezing under various climatic conditions. The study uses "Mean Minimum Temperature" data from the U.S. Climate Normals dataset …
-
Comparison of Flexural Cracking in Reinforced Concrete Beams with Different Rebar Coatings
To enhance the corrosion resistance of steel, coated reinforcing bars are used in concrete. This coating can also affect the bond performance and crack size in steel reinforced concrete. This thesis presents the results of an experimental program wherein the flexural cracks of concrete beams …
-
Design and optimization of a composite rebar for the reinforcement of concrete
… emerged. In previous works, some design of FRP rebar that reinforced in the concrete has helical winding and some with sand coating on the outside. Different from the case of steel bar, the helical ribs here are wound on top of the bar after the bar has been pultruded. The bond between these …
-
Lap Splice Development Length of Rebar in Stabilized Hollow Interlocking Compressed Earth Blocks
… proportions of soil, sand, cement, and water. Rebar bar sizes were restricted to M10 (#3) and M13 (#4) for all lap splice specimens due to the limited area of the hollow 2-inch diameter rebar cavity of the ICEB unit. The limited size and strength of the ICEB units also made the use of larger …
-
The Effect of Shearing on Fully-grouted Rebar Rock Bolts in Saskatchewan Potash Mines
Reinforcing bar (rebar) is a common method of ground support in underground potash mines in Saskatchewan. The rebar is anchored into the potash rock to provide support using resin and the system is referred to as a fully-grouted rebar rock bolt. The rebar can be subjected to tensile deformation and …
Page 1 of 19