Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"recirculating flume"”.
-
Surface water flow resistance due to emergent wetland vegetation
… for use in wetland design. A 6-m by 1-m by 0.4-m recirculating flume was planted with mature common rush, Juncus effusus, a common emergent wetland plant. Three different flow rates (3, 4, and 5 L/s) and three different tailgate heights (0, 2.5, and 5 cm) were used to simulate a variety of wetland …
-
Turbine wheel - a hydropower converter for head differences between 2.5 and 5 m
… was undertaken by testing a turbine wheel in a recirculating flume.<br/><br/>The experiments undertaken shows that the efficiency of this machine approaches 70%. The water flow volume of this machine is in the range of 1.85 m3/s to 5.23m3/s per m width. In addition, the maximum power output is …
-
The transport of manufactured nanoparticles within the hyporheic zone
… upon how these NPs were transported within a recirculating flume with both a plane bed structure and with a bedform present. This showed that the nanoparticles moved freely between the stream and the bed and appear to be under the influence of water flow rather than simply diffusion.
-
Estimating Flow Through Rock Weirs
… predictions of flow through rock weirs. A flume study was conducted to develop a rock weir equation and discharge coefficients. Scaled model rock weirs were tested in a 1 m x 8 m x 0.4 m recirculating flume. Rock weirs varied by length (0.152 m, 0.305 m, and 0.457 m), depth (0.152 m and …
-
Do Muds Sort? Experimental Test of a Hypothesis Key to Understanding Marine Bottom Currents
… silt' hypothesis in the laboratory, a non-recirculating flume was constructed in which silt and clay could be deposited under a variety of velocities, sediment concentrations, and silt to clay ratios. Samples of the deposited material from each experiment were analyzed to determine the …
-
Trapping Efficiency of Non-Buoyant Microplastics by River Groynes
… and 1.11 g/cm³). Experiments were conducted in a recirculating flume using subcritical turbulent flow. A particle tracking model was employed to track and record particle trajectories around groyne fields, from which trapping efficiencies and retention zones were derived. It was observed that MPs …
-
Clay influence on the threshold of movement and physical parameters of sand-mud deposits
… experiments were undertaken using a rectangular recirculating flume, incorporating an oscillating tray. The mixtures consisted of angular fine-grained quartz sands (D50=152.5 m and 215 m) combined with a very cohesive estuarine mud.<br/><br/>Time-averaged erosion threshold current speeds, during …
-
Patchiness: zooplankton behavior in finescale vertical shear layers
… critical ecological importance. In this study, a recirculating flume apparatus with a laminar, planar free jet (the Bickley jet) was used to create finescale gradients of fluid velocity (shear) in both upwelling and downwelling configurations for zooplankton behavioral assays. Particle image …
-
Flume experiments on bedforms and structures at the dune-plane bed transition
A tiltable, recirculating flume, 18 metres long and 76 cm. wide was used to investigate bedforms and structures near the transition between dunes and a plane bed for a moderately sorted, coarse sand. At Froude numbers ranging from about 0.4 to 1.0, three dune types developed: (1) asymmetrical …
-
Experimental Study of Embeddedness Across Gravel Mobility Conditions: Effects of Fine Sediment Supply and Size
… 45 experiments conducted in a water and sediment recirculating flume. Three gravel-sand size mixtures were tested, with increasing initial amounts of sand present in the bed for each mixture. For each set of conditions, experiments were conducted under three gravel mobility conditions: …
-
Effect of water temperature on cohesive soil erosion
… soil were placed in the wall of a recirculating flume channel using a vertical sample orientation. Erosion rate was measured under a range of shear stresses (0.1-20 Pa) for a period of five minutes per shear stress at water temperatures of 12, 20, and 27�"C. The zeta potential was …
-
Ecological engines: Finescale hydrodynamic and chemical cues, zooplankton behavior, and implications for nearshore marine ecosystems
… hydrodynamic and chemical conditions in a recirculating flume system for zooplankton behavioral assays. The goal was to quantify and correlate changes in zooplankton behavior with coincident sensory cues. A laminar, planar free jet (the Bickley jet) was used to create finescale, free shear …
-
Enhancing Gas Transfer At An Air-Water Interface Through Strengthened Secondary Flows Motivated By Algal Biofuel Production
… are conducted in the wide, open channel, recirculating flume (test section Lf = 15.0 m long, B = 2.0 m wide, H = 0.1 m deep) in the DeFrees Hydraulics Laboratory to study the effect of counter-rotating vortices on interfacial gas transfer rates. Longitudinal half-sections of PVC pipes are …
-
Resuspension of E. coli Under Controlled Flows and Stream Bottom Sediments
… by measuring E. coli concentrations in a recirculating flume at two locations. The test was completed for three different bottom sediments: sand, sand-silt, and sand-silt overlain with biofilm. The experiments were conducted at flows below and above the calculated critical shear stress, as …
-
Do Roots Bind Soil? Comparing the Physical and Biological Role of Plant Roots in Streambank Fluvial Erosion
… using a mini jet erosion testing device and a recirculating flume channel to address this goal. Several soil and vegetation factors that influence fluvial entrainment, like extracellular polymeric substances (EPS), soil aggregate stability and root length density, were measured following …
-
Flume Measurements of Erosion Characterstics of Soil at Bridge Foundations in Georgia
… included, and the erosion parameters found from flume measurements are associated with their respective regions. Flume measurements were performed using a rectangular, tilting, recirculating flume located in the hydraulics lab in the School of Civil and Environmental Engineering at Georgia Tech. …
-
Experimental studies of a small scale horizontal axis tidal turbine
… The experiments were carried out in the recirculating flume tank over the range of low Re expected for the small scale rotor rig, in order to provide more accurate results to improve rotor blade design. In addition, numerical simulations using XFOIL, a viscid-inviscid coupled method, were …
-
Laboratory study of alluvial river morphology
A concrete recirculating flume 100 feet long, 24 feet wide, and about 3 feet deep was used to study the different alluvial river channel patterns. The flume was filled with sand and a series of tests were made in which discharge was varied from 0.1 to 0.3 cfs and slope was varied from 0.001 to …
-
Scour at submerged weirs
… programmes were conducted in a tilting recirculating flume. Both clear-water scour and live-bed scour conditions were applied. The experimental results of an investigation of flow structures at the weir show that a large recirculation zone and a flow reattachment region are formed …
-
QUANTIFYING AND PARAMETERIZING AIR-WATER GAS TRANSFER ENHANCEMENT VIA CAPILLARY-GRAVITY BOW WAVES AND STREAMWISE COUNTER-ROTATING VORTICES IN ENVIRONMENTAL AND INDUSTRIAL APPLICATIONS
… acrylic dowels was suspended above a 0.6-m-wide recirculating flume to penetrate the water surface by 1-2 cm and generate capillary-gravity bow waves. High flow speeds introduce additional turbulence due to boundary layer shear and inlet and outlet conditions. To achieve higher relative …
Page 1 of 2