Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 65 for “"refractory metals"”.

  1. Additive Manufacturing of Refractory Metals

    Keen interest in additive manufacturing (AM) of refractory metals such as tungsten has been motivated by the demand for materials capable of enduring extreme temperatures in aerospace and nuclear applications. The aims of this work were to develop alloy compositions for high-temperature …

    unt Repository record for Additive Manufacturing of Refractory Metals (opens in a new tab)

  2. Refractory metals low temperature diffusion bonding

    … of the diffusion bonding temperature during refractory metals’ diffusion bonding process was studied. Two pure refractory metals were used in this study: molybdenum and tungsten. The influence on the joint quality of molybdenum structural conditions, as well as molybdenum surface conditions, …

    qucosa-diss

  3. ADDITIVE MANUFACTURING OF REFRACTORY METALS AND CARBIDES

    … like thermal cycling, ablation, and corrosion. Refractory metals and their carbides are of great interest for these applications due to their excellent high-temperature properties with melting points above 2500 °C. Additionally, these metals also have low thermal expansion coefficients, minimal …

    cornell Repository record for ADDITIVE MANUFACTURING OF REFRACTORY METALS AND CARBIDES (opens in a new tab)

  4. Dynamic abnormal grain growth of selected refractory metals

    Dynamic abnormal grain growth (DAGG) is a phenomenon by which single crystals up to centimeters in length are produced at elevated temperature during the application of strain. DAGG was previously demonstrated in commercial-purity molybdenum (Mo) materials. This is the first investigation to …

    texas Repository record for Dynamic abnormal grain growth of selected refractory metals (opens in a new tab)

  5. Reactions between refractory metals and silica at elevated temperature

    … on the reaction between silica glass and the refractory metals, Mo, V, Nb, Ta, Ti and Zr. The metals were heated to 1650°C under vacuum (5x10⁻⁴m.m. of Hg.) in contact with the silica. The interface was examined metallographically. The formation of compounds was examined by X-ray diffraction …

    ubc Repository record for Reactions between refractory metals and silica at elevated temperature (opens in a new tab) Download PDF for Reactions between refractory metals and silica at elevated temperature (opens in a new tab)

  6. Mechanisms, Microstructures, and Mechanical Behavior in Cold Spray Refractory Metals

    … and laser heated cold spray (LHCS) for the refractory materials tantalum and niobium. Refractory metals possess many desirable material properties, such as high melting temperatures (generally over 2,000℃) and excellent wear resistance. Traditional melt-based additive manufacturing (AM) …

    alabama Repository record for Mechanisms, Microstructures, and Mechanical Behavior in Cold Spray Refractory Metals (opens in a new tab)

  7. Fundamental study of indium oxide doped with refractory metals, A

    Includes bibliographical references (pages 203-210).

    colo-mines Repository record for Fundamental study of indium oxide doped with refractory metals, A (opens in a new tab)

  8. ELUCIDATING THE ULTRA-HIGH TEMPERATURE DEFORMATION MECHANISMS OF REFRACTORY METALS AND ALLOYS

    … strength at ultra-high temperatures (UHTs). Refractory metals and alloys possess unprecedented high temperature properties attributed to their extraordinarily high melting temperatures, making them attractive for these applications. Additive manufacturing, specifically laser powder bed fusion …

    jhu Repository record for ELUCIDATING THE ULTRA-HIGH TEMPERATURE DEFORMATION MECHANISMS OF REFRACTORY METALS AND ALLOYS (opens in a new tab) Embargoed until 2027-05-01

  9. Diffusion Couple Alloying of Refractory Metals in Austenitic and Ferritic/Martensitic Steels

    … to 316 stainless (316SS) and alloy HT9 steels. Refractory elements have been previously studied as alloying candidates to mitigate problems such as radiation-induced segregation, void swelling, and irradiation creep in reactor steels. Diffusion couples were characterized via energy dispersive …

    nps Repository record for Diffusion Couple Alloying of Refractory Metals in Austenitic and Ferritic/Martensitic Steels (opens in a new tab)

  10. JOINING OF ULTRA-HIGH TEMPERATURE CERAMICS TO THE SAME AND REFRACTORY METALS VIA FUSION WELDING

    … temperature ceramics to either themselves or refractory metals/alloys via fusion welding and the mechanical strength of produced joints. The ceramics studied consisted of compositions within a diboride-carbide-carbide ternary system while metals studied consisted of molybdenum and a molybdenum …

    must-thes Repository record for JOINING OF ULTRA-HIGH TEMPERATURE CERAMICS TO THE SAME AND REFRACTORY METALS VIA FUSION WELDING (opens in a new tab)

  11. Laser Surface Alloying of Refractory Metals on Aluminum for Enhanced Corrosion Resistance: Experimental and Computational Approaches

    … corrosion resistant coatings on aluminum. The refractory metal (Mo, W, Nb, Ta) precursor deposit was spray coated separately on aluminum substrate and was subsequently surface alloyed using a continuous wave diode-pumped ytterbium laser at varying laser energy densities. Microstructural …

    unt Repository record for Laser Surface Alloying of Refractory Metals on Aluminum for Enhanced Corrosion Resistance: Experimental and Computational Approaches (opens in a new tab)

  12. FABRICATION OF NANOPOROUS MATERIALS FOR APPLICATIONS UNDER EXTREME ENVIRONMENTS

    … the need to explore the synthesis of nanoporous refractory metals. For this purpose, niobium was selected as one such element, primarily due to its low neutron absorption cross-section and high-temperature stability that renders it a candidate structural material in fusion energy systems. A novel …

    uky-thes Repository record for FABRICATION OF NANOPOROUS MATERIALS FOR APPLICATIONS UNDER EXTREME ENVIRONMENTS (opens in a new tab)

  13. Joining of Ceramics and Ceramic Matrix Composites (CMC) for Aerospace and Energy Applications

    … technique defined “RM-Wrap” (RM=Mo, Nb, Ta, W Refractory Metals) has been developed within this thesis. The developed technique is a novel brazing technology named RM-Wrap after the metal used as a wrap to contain one or more silicon foils (e.g. Mo-Wrap when a Mo wrap is used to contain a Si …

    poli-torino Repository record for Joining of Ceramics and Ceramic Matrix Composites (CMC) for Aerospace and Energy Applications (opens in a new tab)

  14. A tribological and biomimetic study of potential bone joint repair materials

    … represent three different repairing strategies. Refractory metals with and without treatment are candidates for total joint replacements due to their mechanical strength, high corrosion resistance and biocompatibility. A composite of biodegradable polytrimethylene carbonate, hydroxyl apatite, and …

    tamu Repository record for A tribological and biomimetic study of potential bone joint repair materials (opens in a new tab)

  15. Electrodeposition of Nb, Ta, Zr and Cu from Ionic Liquid for Nanocomposites Preparation

    … applications. Composite materials based on metals with different characteristics give rise to new materials with unique properties. Among the others, nanostructured composites constituted by immiscible metals can present interfaces able to control defects produced by high doses of radiation, …

    cagliari Repository record for Electrodeposition of Nb, Ta, Zr and Cu from Ionic Liquid for Nanocomposites Preparation (opens in a new tab)

  16. 10kHz Pulse Repetition Frequency CO2 Laser for Processing High Damage Threshold Materials

    … processes necessary for machining many of the refractory metals and ceramics employed in the manufacture of engineering components. Operated in a pulsed mode, analogous to solid state laser operation, the CO2:N2 laser can be designed to overcome these power intensity limitations. Nitrogen …

    glasgow Download PDF for 10kHz Pulse Repetition Frequency CO2 Laser for Processing High Damage Threshold Materials (opens in a new tab)

Page 1 of 4