Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"regenerative chatter"”.

  1. Predicting regenerative chatter in turning using operational modal analysis

    Chatter, unstable vibration during machining, damages the tool and workpiece. A proper selection of spindle speed and depth of cut are required to prevent chatter during machining. Such proper cutting conditions are usually determined using vibration models of the machining process. Nonetheless, …

    uvic Repository record for Predicting regenerative chatter in turning using operational modal analysis (opens in a new tab)

  2. On the development of a dynamic cutting force model with application to regenerative chatter in turning

    … in turning operations is unstable cutting or chatter. This can reduce the life of tooling, dimensional accuracy, and the quality of a part's surface finish because of severe levels of vibration. Ideally, cutting conditions are chosen such that material removal is performed in a stable manner. …

    gatech Repository record for On the development of a dynamic cutting force model with application to regenerative chatter in turning (opens in a new tab)

  3. Digital Apprentice for Chatter Detection: An On-line Learning Approach to Regenerative Chatter Detection in Machining via Human-Machine Interaction

    Regenerative chatter in machining, which is characterized by self-excited vibration, is a common process anomaly that limits productivity and part quality in machining operations. This thesis proposes an on-line approach for chatter detection via effective human-machine interaction, facilitating …

    gatech Repository record for Digital Apprentice for Chatter Detection: An On-line Learning Approach to Regenerative Chatter Detection in Machining via Human-Machine Interaction (opens in a new tab)

  4. Chatter detection and suppression using wavelet and fuzzy control approaches in end milling

    In metal cutting processes, chatter has been recognized as one of the main factors that limit machining productivity and affect product quality. Two different categories of chatter were classified by researchers, i.e., regenerative chatter and non-regenerative chatter, and in this thesis the former …

    ottawa-retro Repository record for Chatter detection and suppression using wavelet and fuzzy control approaches in end milling (opens in a new tab)

  5. Investigation of Robust Chatter Stability in Milling

    In machining operations, self-excited regenerative chatter can develop due to a phase difference between overlapping cutting paths which results in oscillating chip thickness. Machine tool chatter decreases overall productivity and quality of manufactured parts due to excessive vibrations. …

    calgary Repository record for Investigation of Robust Chatter Stability in Milling (opens in a new tab)

  6. ON THE STABILITY OF VARIABLE HELIX MILLING TOOLS

    … this goal can be restricted by the appearance of regenerative chatter vibrations. In milling, one approach for regenerative chatter suppression is the implementation of variable-helix cutters. However, these tools can lead to isolated unstable regions in the stability diagram. Currently, …

    whiterose Download PDF for ON THE STABILITY OF VARIABLE HELIX MILLING TOOLS (opens in a new tab)

  7. Study of vibrations and instability in a robotic grinding process

    … model. The limit of stable impact cutting due to regenerative chatter was investigated next. The investigation resulted into understanding that the high compliance of the robot arm locates the problem of robotic grinding regenerative chatter on the far upper right of the first lobe on the …

    ets-quebec Download PDF for Study of vibrations and instability in a robotic grinding process (opens in a new tab)

  8. Investigation of Inerter-based Vibration Absorbers for Machining Chatter Stability

    Regenerative chatter, which is unstable vibration, is one of the most important issues that limit milling operations' productivity. One way to suppress the regenerative chatter is to utilise passive control methods such as tuned mass dampers (TMDs). However, the performance of passive control …

    whiterose Download PDF for Investigation of Inerter-based Vibration Absorbers for Machining Chatter Stability (opens in a new tab)

  9. Operational modal analysis for chatter prediction in milling

    … due to unmodeled dynamics or process variations, chatter can still occur, highlighting the need for online chatter monitoring systems. Existing methods often detect chatter only after it occurs, so there is a need for monitoring systems that can predict chatter before it occurs to ensure …

    uvic Repository record for Operational modal analysis for chatter prediction in milling (opens in a new tab)

  10. MODELLING AND ANALYSIS OF CHATTER MITIGATION STRATEGIES IN MILLING

    … performance and product quality. Uncontrolled chatter phenomenon causes too many defects and problems in manufacturing industry such as increased surface roughness, tool wear and even machine breakdown. In this subject area, great effort has been focused on developing different mechanisms and …

    whiterose Download PDF for MODELLING AND ANALYSIS OF CHATTER MITIGATION STRATEGIES IN MILLING (opens in a new tab)

  11. Chatter avoidance in milling

    … limitations on productivity in metal cutting is chatter. Chatter is a form of unstable self-excited vibration which causes poor surface finish, as well as cutter and machine tool damage. The investigation of chatter suppression in milling using continuously variable spindle speed is presented in …

    ubc Repository record for Chatter avoidance in milling (opens in a new tab) Download PDF for Chatter avoidance in milling (opens in a new tab)

  12. Position-dependent dynamics and stability of machine tools

    … Lack of dynamic stiffness may lead to unstable regenerative chatter vibrations which are detrimental to the performance. The chatter vibrations are influenced by the changing structural dynamics of the machine as the tool moves along the tool path, resulting in position-varying machining …

    ubc Repository record for Position-dependent dynamics and stability of machine tools (opens in a new tab) Download PDF for Position-dependent dynamics and stability of machine tools (opens in a new tab)

  13. Mechanics and dynamics of drilling

    … to integrated simulation of static, dynamic and regenerative chatter vibrations of the drilling process and generated hole surface. The model is also used to investigate the mechanism of whirling vibrations and the hole wall formation by imposing commonly observed whirling motion on the drill. …

    ubc Repository record for Mechanics and dynamics of drilling (opens in a new tab) Download PDF for Mechanics and dynamics of drilling (opens in a new tab)

  14. Vibration Control for Chatter Suppression with Application to Boring Bars

    … control the self-excited oscillations known as chatter that occur when single-point turning a rigid workpiece with a flexible tool. The nature of this manufacturing process, its complex geometry, harsh operating environment, and poorly understood physics, present considerable challenges to the …

    vt Repository record for Vibration Control for Chatter Suppression with Application to Boring Bars (opens in a new tab)

  15. Vibrace při obrábění kovů

    Práce ve své teoretické části uvádí matematický popis kmitání, způsoby vzniku chvění při obrábění a měření modálních parametrů obráběcího stroje. Praktická část obsahuje sestavení lobe diagramu stability pro poloautomatický soustruh SPN 12 CNC, určený na základě naměřených vlastních frekvencí …

    brno-tech Repository record for Vibrace při obrábění kovů (opens in a new tab)

  16. Vibrace při frézování kovů

    Tato práce obsahuje teoretický popis frézování, matematický popis kmitání a příčiny vzniku samobuzeného kmitání při frézování. Dále se zabývá dynamickým měřením obráběcích strojů a diagramem stability. V poslední řadě uvádí způsoby předcházení, odstranění nebo maximální redukci samobuzeného kmitání …

    brno-tech Repository record for Vibrace při frézování kovů (opens in a new tab)

  17. Aktivní řízení tlumení kmitání / samobuzeného kmitání jednotek vřeten obráběcích strojů

    Táto bakalárska práca popisuje problematiku obrábania, príčiny kmitania vretena a rôzne spôsoby tlmenia kmitov. Následne zhodnocuje výhody a nevýhody jednotlivých spôsobov tlmenia. Bol vytvorený a popísaný jednoduchý simulačný model, na ktorom boli prevedené vyhľadávacie simulácie za účelom získať …

    brno-tech Repository record for Aktivní řízení tlumení kmitání / samobuzeného kmitání jednotek vřeten obráběcích strojů (opens in a new tab)

  18. Testování dynamických vlastností obráběcích strojů

    Diplomová práce se zabývá experimentálním hodnocením dynamických vlastností frézovacích strojů na základě měření vibrací při obrábění. Cílem bylo analyzovat chování dvou typů nástrojů, nástrčné čelní frézy a čelní válcové stopkové frézy s velkým vyložením, na třech různých frézovacích strojích při …

    brno-tech Repository record for Testování dynamických vlastností obráběcích strojů (opens in a new tab)