Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"remaining strength"”.

  1. The finite element method analysis for assessing the remaining strength of corroded oil field casing and tubing

    Um die Betriebssicherheit von Förder- und Speicherbohrungen auch nach langjährigem Einsatz zu gewährleisten, ist eine sorgfältige Untersuchung und Einschätzung von Schadensstellen angezeigt. Insbesondere sind dabei die Beanspruchungen der ausgewählten Rohrabschnitte für den weiteren Betrieb zu …

    qucosa-diss

  2. Methods for Evaluation of the Remaining Strength in Steel Bridge Beams with Section Losses due to Corrosion Damage

    … of the web used in determining the percentage of remaining thickness should consist of the bottom 3 inches of the web and should extend the length of the bearing plus one beam height excluding any areas without any noticeable section losses.

    vt Repository record for Methods for Evaluation of the Remaining Strength in Steel Bridge Beams with Section Losses due to Corrosion Damage (opens in a new tab)

  3. Material Characterization and Life Prediction of a Carbon Fiber/Thermoplastic Matrix Composite for Use in Non-Bonded Flexible Risers

    … the models for long-term behavior, especially remaining strength and life. The MRG is also responsible for the characterization of the material system with a focus on the effects of time, temperature, and environmental exposure. The present work is part of this effort. The motivation to use a …

    vt Repository record for Material Characterization and Life Prediction of a Carbon Fiber/Thermoplastic Matrix Composite for Use in Non-Bonded Flexible Risers (opens in a new tab)

  4. Long term behavior of Arall laminates

    … between damage and stiffness change, remaining strength and life.

    vt Repository record for Long term behavior of Arall laminates (opens in a new tab)

  5. Development of a Novel Performance Index and a Performance Prediction Model for Metallic Drinking Water Pipelines

    … the current rupture modulus can determine the remaining strength of the pipe. The remaining strength can then be used to assess the performance results predicted by the fuzzy inference model. Further a framework is set forth which utilizes the model's predicted performance ratings to develop …

    vt Repository record for Development of a Novel Performance Index and a Performance Prediction Model for Metallic Drinking Water Pipelines (opens in a new tab)

  6. Fatigue behavior of ceramic matrix composites at elevated temperatures under cyclic loading

    To achieve satisfactory levels of strength, fracture toughness, and reliability for man-rated systems such as jet engines, fiber reinforced ceramic matrix composites are needed. An elevated temperature axial testing system is developed to investigate and characterize fatigue behavior of Nicalon …

    vt Repository record for Fatigue behavior of ceramic matrix composites at elevated temperatures under cyclic loading (opens in a new tab)

  7. Mechanics of Fiber-Controlled Behavior in Polymeric Composite Materials

    … are then used to estimate the tensile strength of the composite. The predicted results are compared with experimental values. In addition, a cumulative damage model for fatigue is presented. Modifications to the model are made to include the effects of variable amplitude loading. These …

    vt Repository record for Mechanics of Fiber-Controlled Behavior in Polymeric Composite Materials (opens in a new tab)

  8. Modeling the Residual Strength Distribution of Structural GFRP Composite Materials Subjected to Constant and Variable Amplitude Tension-Tension Fatigue Loading

    … the development of a simulation to predict the remaining strength of structural composites subjected to variable fatigue loading and environmental exposure. The results of this simulation can then be used in LRFD to determine appropriate material factors of safety for engineering design …

    vt Repository record for Modeling the Residual Strength Distribution of Structural GFRP Composite Materials Subjected to Constant and Variable Amplitude Tension-Tension Fatigue Loading (opens in a new tab)

  9. Life prediction of fiber-reinforced composites: macro- and micro-mechanical modeling

    … level. In the first part of this study the remaining strength life prediction methodology MRLife, modified for ceramic composites (CCLife), is integrated into the finite element package CSTEM. to create an integrated design tool for ceramic matrix composites. Using this tool, a case study is …

    vt Repository record for Life prediction of fiber-reinforced composites: macro- and micro-mechanical modeling (opens in a new tab)

  10. Behaviour modification of space trusses

    … member sizes, only a portion of the member strength is used. Attempts have been made to utilize the remaining strength of the members by providing a means of transferring load from critical compression members to the understressed members. However because of the brittle buckling …

    concordia Download PDF for Behaviour modification of space trusses (opens in a new tab)

  11. A Systematic Stiffness-Temperature Model for Polymers and Applications to the Prediction of Composite Behavior

    … in the MRLife prediction code to predict the remaining strength and life of unidirectional PMC's in fatigue bending. End-loaded fatigue experiments were performed. A good correlation between theoretical and experimental results is observed. Finally, the model is used in the Classical …

    vt Repository record for A Systematic Stiffness-Temperature Model for Polymers and Applications to the Prediction of Composite Behavior (opens in a new tab)

  12. Evaluating Effects of Heat Fluxes and Duration on Performance of Firefighters’ Protective Clothing Using Destructive and Non Destructive Methods

    … the effect of the duration of exposure. Tensile strength of three Kevlar/Polybenzimidazole (PBI) outer shell fabrics was measured before and after exposures to heat fluxes of 10 to 40 kW/m2 in the cone calorimeter for 30, 60, 90, 120, and 300s durations. Fabrics exposed to a low heat flux of 10 …

    sask Repository record for Evaluating Effects of Heat Fluxes and Duration on Performance of Firefighters’ Protective Clothing Using Destructive and Non Destructive Methods (opens in a new tab)

  13. Structural Analysis of a Pultruded Composite Beam: Shear Stiffness Determination and Strength and Fatigue Life Predictions

    … under quasi-static loading and to develop a strength prediction for the DWB. FEA was utilized to investigate two possible failure modes in the top flange: compression failure of the carbon fiber plies and delamination at the free edges or taper regions. The onset of delamination was predicted …

    vt Repository record for Structural Analysis of a Pultruded Composite Beam: Shear Stiffness Determination and Strength and Fatigue Life Predictions (opens in a new tab)

  14. The Effect of Woodpecker Damage on the Reliability of Wood Utility Poles

    … levels of woodpecker damage affected the pole strength. In the course of this research, some shear failures were observed. Utility poles being slender cantilevered structures, failures in shear are not expected. The objectives of this study were to determine the effective shear strength of wood …

    waterloo Repository record for The Effect of Woodpecker Damage on the Reliability of Wood Utility Poles (opens in a new tab)

  15. Burst Pressure Prediction for Pipelines with Selective Seam Weld Corrosion Using Experimental Validation, Finite Element Analysis, and Physics-Guided Modeling

    … localization, and burst pressure. Conventional remaining-strength assessment methods are computationally efficient, but they generally do not explicitly account for vertex-radius effects. Conversely, finite element analysis (FEA) can capture the detailed mechanics of SSWC-like notch geometries, …

    houston Repository record for Burst Pressure Prediction for Pipelines with Selective Seam Weld Corrosion Using Experimental Validation, Finite Element Analysis, and Physics-Guided Modeling (opens in a new tab) Embargoed until 2028-08-01

  16. The Effect of Corrosion Defects on the Failure of Oil and Gas Transmission Pipelines: A Finite Element Modeling Study

    … assessment techniques help engineers predict the remaining strength of the wall in a pipe section with a corrosion defect. The corrosion assessment codes in the United States, Canada and Europe are based on ASME-B31G criterion for the evaluation of corrosion defects, established based on …

    unf Repository record for The Effect of Corrosion Defects on the Failure of Oil and Gas Transmission Pipelines: A Finite Element Modeling Study (opens in a new tab) Download PDF for The Effect of Corrosion Defects on the Failure of Oil and Gas Transmission Pipelines: A Finite Element Modeling Study (opens in a new tab)

  17. Ultrasonic Analysis and Tools for Quantitative Material State Awarness of Engineered Materials

    … were found inherently associated with the remaining strength of the composites. Results from the nonlinear analysis were found to be in good agreement with those obtained from CWI analysis. In the near future, it is expected that the structure, structural component or individual material …

    south-carolina Repository record for Ultrasonic Analysis and Tools for Quantitative Material State Awarness of Engineered Materials (opens in a new tab)

  18. Νεοελληνική επιστολογραφία 17ος - 19ος αιώνας

    … the Greeks were making an effort to gather their remaining strength so as to fulfil their intellectual demands. During this century correspondence developed rapidly. As a result of this development the need of conducting manuals so as to impose the limits within the correspondence was carried out, …

    greece Repository record for Νεοελληνική επιστολογραφία 17ος - 19ος αιώνας (opens in a new tab)