Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 52 for “"repassivation"”.

  1. Flow Effects Upon the Repassivation of Iron and Cobalt in Neutral and Acidic Solutions

    … amperometric reduction of the oxide layer. Repassivation of iron, cold rolled steel, and cobalt in neutral and acidic aqueous sulfate solutions was investigated by observing electrochemical current and potential transients under controlled variation of parameters.

    uiuc Repository record for Flow Effects Upon the Repassivation of Iron and Cobalt in Neutral and Acidic Solutions (opens in a new tab)

  2. Pitting corrosion and repassivation of Al65Cu23Fe12 quasicrystals and corrosion characteristics of quasicrystalline Al65Cu23Fe12 modified by additives

    The corrosion resistance of quasicrystalline Al65CU23Fe12 is important because of the unusual properties of quasicrystals. The electrochemical pitting in 0.1 M sodium chloride was studied by voltammetry to determine the value of E[Subscript pit] and E[Subscript rp] with comparisons to different …

    iastate Repository record for Pitting corrosion and repassivation of Al65Cu23Fe12 quasicrystals and corrosion characteristics of quasicrystalline Al65Cu23Fe12 modified by additives (opens in a new tab)

  3. The Characterization and Analysis of In-Vitro and Elevated Temperature Repassivation of Ti-6Al-4V via AFM Techniques

    … Analysis of In-vitro and Elevated Temperature Repassivation of Ti-6Al-4V via AFM Techniques Aaron J Guerrero Research in the corrosion of orthopaedic implants is a growing research field where implants have been known to show adverse effects in patients who have encountered the unfortunate …

    calpoly Repository record for The Characterization and Analysis of In-Vitro and Elevated Temperature Repassivation of Ti-6Al-4V via AFM Techniques (opens in a new tab)

  4. Atmospheric localised corrosion of type 304 austenitic stainless steels

    … sweep method was developed to investigate the repassivation process of pits in concentrated solutions, representative of atmospheric conditions. The onset of repassivation is defined as the point where there is no increase in current with an increase in potential. It has been found that …

    birmingham Download PDF for Atmospheric localised corrosion of type 304 austenitic stainless steels (opens in a new tab)

  5. Atmospheric corrosion of austenitic stainless steels

    … and local pit chemistry on pit propagation and repassivation of 304L and 316L stainless steels were investigated using \(in\) \(situ\) synchrotron X-radiation and electrochemical techniques. Radiography and zig-zag electrochemical sweeps showed that in dilute chloride solutions, partial …

    birmingham Download PDF for Atmospheric corrosion of austenitic stainless steels (opens in a new tab)

  6. Multiphysics Modeling of Environment-assisted Cracking Properties of Advanced Materials for Aerospace and Marine Application

    … dissolution, mechanical deformation, and repassivation within a thermodynamically consistent formulation. The framework addresses the challenge of predicting stress corrosion cracking (SCC) and corrosion fatigue by capturing the competing effects of passive film rupture, localized …

    vt Repository record for Multiphysics Modeling of Environment-assisted Cracking Properties of Advanced Materials for Aerospace and Marine Application (opens in a new tab)

  7. Effect of thiosulfate on passivity and corrosion properties of stainless steels

    … that the presence of thiosulfate hinders the repassivation of the pits. Preferential dissolution of ferrite phase was found on 2101. A statistical analysis of the metastable pitting events monitored by chronoamperometry revealed that thiosulfate promotes pit initiation and stabilizes the …

    gatech Repository record for Effect of thiosulfate on passivity and corrosion properties of stainless steels (opens in a new tab)

  8. Electrochemical and surface topographic studies of oxide film passivation of aluminum

    … of zero charge (E[subscript]PZC) and the repassivation potential, and the actively corroding area increases with potential, from zero near E[subscript]PZC to the entire surface at the repassivation potential. A mathematical model describing the progress of passivation was developed and …

    iastate Repository record for Electrochemical and surface topographic studies of oxide film passivation of aluminum (opens in a new tab)

  9. Local Environment in Pitting Corrosion of Aluminum

    … microsensors were used to study propagation and repassivation of pits on pure aluminum in pH 11 NaCl solution. It was concluded that the pH inside a growing pit was around 2.7, and the chloride concentration was higher than the saturation concentration. After current to the pit was turned off, pH …

    uiuc Repository record for Local Environment in Pitting Corrosion of Aluminum (opens in a new tab)

  10. Stress corrosion cracking of X65 pipeline steel in fuel grade ethanol environments

    … film rupture in the SCC mechanism. Analysis of repassivation kinetics in mechanical scratch tests revealed a large initial anodic dissolution current spike in SCC-causing environments, followed by repassivation indicated by current transient decay. In the deaerated environments, repassivation …

    gatech Repository record for Stress corrosion cracking of X65 pipeline steel in fuel grade ethanol environments (opens in a new tab)

  11. Experimental and Theoretical Investigation of Localized Ultrasonically-Induced Cavitation Effects on Electrochemical Passivity (Corrosion, Mass Transfer, Depassivation)

    … the processes controlling the depassivation and repassivation phenomena were quantitatively analyzed. Experimental investigations were coupled with theoretical models to enable the prediction and evaluation of mass transfer rates and fluid pressures near the metal surface.

    uiuc Repository record for Experimental and Theoretical Investigation of Localized Ultrasonically-Induced Cavitation Effects on Electrochemical Passivity (Corrosion, Mass Transfer, Depassivation) (opens in a new tab)

  12. Corrosion fatigue and pitting behaviour of duplex stainless steels in chloride solutions

    … CF tests were combined with studies of repassivation kinetics to determine the mechanism of CF crack propagation. The crack tip chemistry was maintained under well characterized conditions by using high frequency fatigue testing to produce good mixing between the crack solution and bulk …

    ubc Repository record for Corrosion fatigue and pitting behaviour of duplex stainless steels in chloride solutions (opens in a new tab) Download PDF for Corrosion fatigue and pitting behaviour of duplex stainless steels in chloride solutions (opens in a new tab)

  13. Wear/corrosion sensing in flowing seawater

    … pitting occurs and impacts cause depassivation/repassivation events. These can be monitored using Electrochemical Noise techniques. A new application of the wavelet transform allows separation of these effects, and a preliminary quantitative understanding of how the chloride inhibition of impact …

    soton Download PDF for Wear/corrosion sensing in flowing seawater (opens in a new tab)

  14. Effectiveness of Thermal Oxidation in Relation to Anterior Cervical Plates

    … were subjected to potential-step tests to assess repassivation ability after abrasion. All samples displayed repassivation ability, except for the sample treated at 600˚C for 4 hours. Surface roughness was measured with atomic force microscopy before and after thermal oxidation treatments. Lower …

    calpoly Repository record for Effectiveness of Thermal Oxidation in Relation to Anterior Cervical Plates (opens in a new tab)

  15. Molybdate-based Conversion Coatings for Corrosion Protection of Aluminum Alloys

    … when compared to as-received AA2024-T6. The repassivation ability of the so formed MoCC on AA2024-T6 was tested by scratching the sample with a glass tip and measuring the OCP. Immediately after scratching, the OCP dropped significantly due to the exposed underlying alloy. However, within 5 …

    unr Repository record for Molybdate-based Conversion Coatings for Corrosion Protection of Aluminum Alloys (opens in a new tab) Embargoed until 9999-12-31

  16. Understanding the Erosion – Corrosion Behaviour of Generic Types of Stainless Steels in a CO2 – Saturated Oilfield Environment

    … steels. For example, a good link between the repassivation ability under static conditions (i.e. (Eb-Er) and imax) and erosion-enhanced corrosion was existed. Also, the same parameters linked well with the repassivation time under erosion-corrosion conditions. Moreover, results revealed that …

    whiterose Download PDF for Understanding the Erosion – Corrosion Behaviour of Generic Types of Stainless Steels in a CO2 – Saturated Oilfield Environment (opens in a new tab)

  17. Effect of aqueous environments on the fatigue behavior of 90-10 copper nickel

    … due to the retardation of film formation and repassivation. These studies showed that three different mechanisms of corrosion fatigue were likely: localized anodic dissolution, surface film rupture and hydrogen embrittlement. The dominance of one mechanism over the other two depends on the …

    vt Repository record for Effect of aqueous environments on the fatigue behavior of 90-10 copper nickel (opens in a new tab)

Page 1 of 3