Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 122 for “"repeated loading"”.
-
Repeated Loading of Normally Consolidated Clay
The effects of repeated loading on a normally consolidated,saturated silty clay, are compared to the effects of sustained loading and standard strength tests on the same material. Attention is given to axial strains and pore water pressures generated under the different loading conditions.
-
Compaction of Soil by Repeated Loading
Abstract Compaction of Soil by Repeated Loading Rouzbeh Roudgari Construction of roads is usually made by stripping the top soil (600 to 1000 mm), which often contains organic materials, and replacing it with a layer of subgrade material (crushed stones, well-graded sand). One of the main design …
-
Foundations on sloped fills under repeated loading
… fills of different angles and subjected to repeated loading of different amplitudes and frequencies. Both small- and large-scale experiments were carried out under plane-strain conditions with a strip footing placed at a constant setback distance from the slope crest. Model sloped fills …
-
EFFECTS OF REPEATED LOADING ON DEFLECTION OF CONCRETE BEAMS
Creep of concrete under sustained static loading is a well-known and relatively well-researched phenomenon. Many structures, however, are subjected to dynamic and often cyclic loads ( e.g. traffic and wind-induced loading) in addition to static loads under operating conditions. In such cases …
-
Further studies on the repeated loading of piles in sand.
… the behaviour of isolated piles subjected to repeated loading and placed at various depths in a medium dense sand upon which either static or cyclic surcharge acted. The piles, which were of laboratory scale, were instrumented by strain gauged load cells located along the inner surfaces of the …
-
Mechanics, Recovery, and Injury Risk of the Intervertebral Disc in Repeated Loading
… to occupational tasks that involve complex loading conditions such as combined flexion and compression. Despite its prevalence, the etiology of LBP is unknown in about 90% of patients. While the intervertebral disc (IVD) and vertebral endplates are recognized as potential sources of pain, …
-
Design by analysis methods for ductile collapse modes under static and repeated loading
… to operate under extreme thermal and mechanical loading conditions. There are many potential failure mechanisms and the consequences of a component failing could be disastrous. To help solve such a complex problem, dedicated Boiler and Pressure Vessel Design Codes exist to ensure the safe design …
-
Behaviour of reinforced crumbed rubber concrete (CRC) beams under static and repeated loading
… load condition. Beams were also tested under repeated loading to evaluate their energy absorption capacity. These experimental results were used to compare the behaviour of similar strength CRC with different amount of rubber particles. Results were also compared with the predictions of design …
-
Characteristics and Behavior of Geosynthetic Reinforced Base Layers Over Soft Subgrade Under Repeated Loading
… roads. A series of laboratory-based largescale repeated plate load tests were performed on various geosynthetics reinforced unpaved sections to understand their behavior and quantify the benefits of these stiffer geosynthetics namely geocells, geogrids and geo-composites. Major part of the …
-
Bond Behaviour of Corroded and CFRP Repaired RC Beams Subjected to Monotonic and Repeated Loading
… These structures are usually also subjected to repeated loading. Repeated loading can initiate cracks in the concrete surrounding the steel bars that propagate as the number of load cycles increases leading to the destruction of the concrete-steel interface and slip of the steel bars inside the …
-
Behaviour of clayey soils under slow repeated loading and laboratory estimation of K(0) for overconsolidated sands.
Repeated undrained load tests were carried out under the application of cyclic deviator stresses at a frequency that varies from 0.0001 Hz up to 0.001 Hz. For a specific amplitude of applied stress, a critical level of repeated loading (CLRL) was evaluated for both kaolinite and crust clays. The …
-
Development of a phenomenological constitutive model for fracture resistance degradation of asphalt concrete with damage growth due to repeated loading
… accelerates distress on the AC layer. Repeated traffic and environmental loading applied to the AC layer also induce degradation of the layer’s strength as microcracks grow at stress levels lower than the layer’s designed strength. In addition, this could be magnified when combined with …
-
Incremental Collapse of Reinforced Concrete Continuous Beams
… the sensitivity of such structures to variable repeated loading. In attempt for more accurate prediction of the behaviour of reinforced concrete beams when subjected to variable repeated loading, the numerical beam analysis was developed.</p> <p> An experimental program was conducted on 10 …
-
Characterisation of cross-anisotropic pavement materials
… and manufacture of a new form of rigid-boundary, repeated-loading, true-triaxial test equipment, the development of a laboratory procedures and techniques for analysing the experimental data. In order to verify the validity of the procedure, the selected technique was implemented on a typical, …
-
Fatigue Bond Behaviour of Corroded Reinforcement and CFRP Confined Concrete
… of a structure under both static and cyclic loading. Corrosion of reinforcing steel in RC structures is the primary reason behind bond loss in RC elements. A loss of bond in concrete results in a decrease in the serviceability strength and eventually causes a brittle and sudden failure. …
-
Time-Dependent Behaviour of Reinforced Concrete Beams under Sustained and Repeated Loads
… reinforced concrete beams subjected to different loading types. Both bonded and partially debonded (in the maximum moment zone) reinforced concrete beams under static sustained and repeated loading were investigated. Information relating to surface strains and mid-span deflection were continuously …
Page 1 of 7